
The AirTAC GAC F.R.L. Unit GAC200N08SNTK is a genuine three-unit F.R.L. combination — a filter, a pressure regulator and a lubricator pre-assembled on one bracket with quick mounting clamps. It has 1/4" ports, a 40 µm filter element and regulates 0.15 - 0.9 MPa (20 - 130 psi).
Delivering cleaned, regulated and lubricated air for compact pneumatics, this AirTAC unit combines a filter, regulator and lubricator on a single L-shape bracket. The 1/4in ported body operates at 0.15-0.9 MPa (20-130 psi) and uses a 40 um element to protect downstream moving parts. Because the lubricator sits last in the sequence, oil mist is introduced downstream of the regulator seat, preventing fouling. The assembly weighs 750 g and holds 36 cc of oil.
This specific configuration uses a nylon bowl and omits the pressure gauge, leaving a 1/8in connection if you need to add one later. A reverse-flow (reflux) valve is fitted, which the catalogue illustrates as a separate pneumatic symbol on its own page. Condensate is managed by a semi-automatic and manual drain pair, requiring operator interaction during each pressure drop cycle. Order code GAC200N08SNTK has NPT ports (the T in the code) for North American pipe fittings.
| Model | Airtac GAC F.R.L. Unit GAC200N08SNTK |
|---|---|
| Series | GAC200 F.R.L. combination |
| Port size | 1/4" (NPT thread) |
| Filtering grade | 40 µm |
| Pressure range | 0.15 - 0.9 MPa (20 - 130 psi) |
| Type | Standard |
| Bowl material | Nylon |
| Drain type | Semi-auto drain + manual drain |
| Fluid | Air |
|---|---|
| Max. pressure | 1.0 MPa (145 psi) |
| Proof pressure | 1.5 MPa (215 psi) |
| Temperature range | -5 to +70 °C (unfreeze) |
| Capacity of drain bowl | 25 cc |
| Capacity of oil bowl | 36 cc |
| Recommended lubricant | ISO VG 32 or equivalent |
| Weight | 750 g |
Specifications follow the official AirTAC GAC catalogue (pages 216-217). Air must not freeze in the unit. No gauge is supplied with this model — the gauge connection on a GAC200 is 1/8" if you add one.
| GAC200 | GA200 series F.R.L. unit — sets ports, bowl capacity and weight. |
|---|---|
| N | Bowl material: Nylon. Available on this body: PC (blank), Metal (C), Nylon (N). |
| 08 | Port size 1/4". This body offers 06 = 1/8", 08 = 1/4". |
| (blank) | Drain: Semi-auto drain + manual drain. |
| S | Standard type — 0.15 - 0.9 MPa (20 - 130 psi). This body offers Standard (S) or Lower pressure (L). |
| N | No pressure gauge; 1/8" gauge connection. |
| (blank) | Filtering grade 40 µm. |
| T | NPT thread; gauge scale psi / bar. |
| K | Reverse-flow (reflux) valve attached. |
Constituent units, orderable separately as spares: GAF200-08 filter, GAR200-08 regulator, GAL200-08 lubricator — all three share this body and port.
Figures are the end of the flow curve plotted in the AirTAC catalogue at 0.7 MPa inlet pressure — a sizing envelope for comparing bodies, not a rated flow. Read the catalogue curve for a real duty point. Outlet pressure falls as flow rises, so size a body with headroom above your peak demand.
| This model | GAC200 · 1/4" · curve to 1750 L/min |
|---|---|
| One size up | GAC300 (curve to 3000 L/min) |
| Build order | Filter → bracket → regulator → lubricator |
Feeds single air grinders and small pneumatic spindles on a workshop bench, supplying steady pressure and oil mist for continuous operation.
Conditions air for compact handling jigs where a 1/4in port is sufficient, ensuring grippers receive clean, lubricated air to prevent seal wear.
Prepares supply for small-scale pneumatic test rigs, using the 40 um element to shield sensitive valves from pipe scale.
Choose this 1/4in body for single actuators or small jigs where space is tight, stepping up to the GAC300 if you need a 60 cc drain bowl instead of the 25 cc capacity here. The nylon bowl keeps the assembly light, while the missing gauge means the set pressure cannot be read without adding one to the 1/8in port. If the downstream line must stay oil-free, omit the lubricator and choose a filter-regulator instead. Replacement spares are GAF200-08, GAR200-08 and GAL200-08. The catalogue flow curve for the GAC200 is plotted to 1750 L/min at 0.7 MPa inlet, which is about 29% of the GAC300's 3000 L/min envelope, and the 1.5 MPa (215 psi) proof pressure provides a 1.5x burst-test margin over the 1.0 MPa maximum.
Quick checklist
The lubricator adds an oil mist downstream of the regulator. If any part of the line must stay oil-free, use a filter-regulator instead of an F.R.L. combination on that branch.
This standard type unit regulates from 0.15-0.9 MPa (20-130 psi) with a maximum pressure of 1.0 MPa (145 psi) and a proof pressure of 1.5 MPa (215 psi). It operates in temperatures from -5 to 70 C, uses a 40 um element, and weighs 750 g. The drain bowl holds 25 cc and the oil bowl holds 36 cc, requiring ISO VG 32 or equivalent lubricant.
The N in the ordering code indicates no gauge is supplied. You can add a circular gauge to the 1/8in connection on the body, but until then the exact set pressure cannot be read directly from the unit.
T selects NPT port threads, the North American taper pipe standard. Without it the same order code has PT (Rc) ports, and with G it has G (BSPP) ports; body, function and dimensions do not change.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Most standard models are dispatched in 3-5 days.
Most inquiries answered within 7 hours.
Send us the quantity, thread type (PT / G / NPT) and destination. We confirm price, availability and lead time — usually within 7 hours.