verified AirTAC China Authorized Export Seller shield 100% Genuine AirTAC Parts workspace_premium 1-Year Warranty
appsShop by Modelexpand_more
person shopping_cart Request a QuoteQuote
AirTAC GAC300 · F.R.L. Combination (Filter + Regulator + Lubricator)

Airtac GAC F.R.L. Unit GAC30008ALNWTK

The AirTAC GAC F.R.L. Unit GAC30008ALNWTK is a genuine three-unit F.R.L. combination — a filter, a pressure regulator and a lubricator pre-assembled on one bracket with quick mounting clamps. It has 1/4" ports, a 5 µm filter element and regulates 0.15 - 0.4 MPa (20 - 58 psi).

  • TypeF.R.L. combination
  • Port size1/4"
  • Pressure range0.15 - 0.4 MPa (20 - 58 psi)
  • Filtering grade5 µm
  • Bowl materialPC
  • Drainautomatic
  • Pressure gaugeNot fitted
  • Weight1300 g
$98.36 $105.86Save 7% Standard model — usually dispatched in 3-5 days
Request a Quote
  • No minimum order. A single piece can be ordered.
  • Shipped from our own warehouse: most standard models dispatch in 3–5 days; custom and non-standard models take 8–10 business days. Transit time after that depends on the destination.
Compare every GAC300-08 bowl, type and element option on one page All GAC300-08 codes →
verified Genuine AirTAC workspace_premium 1-year warranty bolt Reply in 7 h

About the Airtac GAC F.R.L. Unit GAC30008ALNWTK

Delivering cleaned, regulated and lubricated air for downstream pneumatics, this AirTAC F.R.L. combination pre-assembles a filter, regulator and lubricator on a single L-shape bracket with quick mounting clamps. This specific GAC30008ALNWTK variant is built around a 1/4in port and uses a 5 um element to trap fine particles before they reach precision valves. The lower-pressure type restricts the operating range to 0.15-0.4 MPa (20-58 psi).

Because the lubricator sits last in the sequence, oil mist is added downstream of the regulator seat, preventing fouling during pressure control. The unit relies on a PC bowl and an automatic drain that empties the 60 cc condensate sump without operator input. No gauge is supplied, but a 1/8in gauge connection allows a panel to be added later if the set pressure needs to be read. This version has NPT ports (the T in the order code) for North American pipe fittings.

Airtac GAC F.R.L. Unit GAC30008ALNWTK Technical Specifications

ModelAirtac GAC F.R.L. Unit GAC30008ALNWTK
SeriesGAC300 F.R.L. combination
Port size1/4" (NPT thread)
Filtering grade5 µm
Pressure range0.15 - 0.4 MPa (20 - 58 psi)
TypeLower pressure
Bowl materialPC
Drain typeAutomatic drain
FluidAir
Max. pressure1.0 MPa (145 psi)
Proof pressure1.5 MPa (215 psi)
Temperature range-5 to +70 °C (unfreeze)
Capacity of drain bowl60 cc
Capacity of oil bowl98 cc
Recommended lubricantISO VG 32 or equivalent
Weight1300 g

Specifications follow the official AirTAC GAC catalogue (pages 216-217). Air must not freeze in the unit. No gauge is supplied with this model — the gauge connection on a GAC300 is 1/8" if you add one.

Model Code: Airtac GAC F.R.L. Unit GAC30008ALNWTK

GAC300GA300 series F.R.L. unit — sets ports, bowl capacity and weight.
(blank)Bowl material: PC. Available on this body: PC (blank), Metal (C), Nylon (N).
08Port size 1/4". This body offers 08 = 1/4", 10 = 3/8", 15 = 1/2".
ADrain: Automatic drain.
LLower pressure type — 0.15 - 0.4 MPa (20 - 58 psi). This body offers Standard (S) or Lower pressure (L).
NNo pressure gauge; 1/8" gauge connection.
WFiltering grade 5 µm.
TNPT thread; gauge scale psi / bar.
KReverse-flow (reflux) valve attached.

Constituent units, orderable separately as spares: GAF300-08 filter, GAR300-08 regulator, GAL300-08 lubricator — all three share this body and port.

Size Class & Flow Envelope

  • GAC2001/8"-1/4" · 1750 L/min
  • GAC3001/4"-1/2" · 3000 L/min
  • GAC4003/8"-1/2" · 6000 L/min
  • GAC5003/4" · 7000 L/min
  • GAC6003/4"-1" · 12000 L/min

Figures are the end of the flow curve plotted in the AirTAC catalogue at 0.7 MPa inlet pressure — a sizing envelope for comparing bodies, not a rated flow. Read the catalogue curve for a real duty point. Outlet pressure falls as flow rises, so size a body with headroom above your peak demand.

This modelGAC300 · 1/4" · curve to 3000 L/min
One size downGAC200
One size upGAC400 (curve to 6000 L/min)
Build orderFilter → bracket → regulator → lubricator

Where the Airtac GAC F.R.L. Unit GAC30008ALNWTK Is Used

science

Laboratory Analyzers

Feeds low-pressure instrument air to sensitive lab equipment, using the 5 um element to protect delicate pneumatic logic from fine particulate ingress.

package_2

Light Packaging Lines

Conditions air for small-bore actuators on low-force sealing jaws, relying on the automatic drain to clear condensate during continuous daily runs.

precision_manufacturing

Textile Guiding Cylinders

Supplies a steady 0.4 MPa to low-tension fabric guiding cylinders, adding a controlled oil mist downstream to extend actuator seal life.

Is the Airtac GAC F.R.L. Unit GAC30008ALNWTK the Right Air-Prep Unit?

Choose this configuration when a machine requires low-pressure actuation and fine filtration, but remember the L type tops out at 0.4 MPa, making it the wrong part if the line may ever need higher force. The 5 um element provides cleaner air than the standard 40 um grade, which is ideal for sensitive instrumentation but requires more frequent element changes. If the downstream process must remain strictly oil-free, omit the lubricator and select a separate filter-regulator instead. The automatic drain suits unattended stations, and the reverse-flow (reflux) valve is fitted, which the catalogue shows as a separate pneumatic symbol on its own page. Should a component fail, order the individual spares GAF300-08, GAR300-08 and GAL300-08 rather than replacing the whole assembly. Stepping up to the GAC400 body raises the plotted flow envelope from 3000 L/min to 6000 L/min at 0.7 MPa inlet, doubling the capacity. Choosing this lower-pressure L type means the 0.4 MPa ceiling is just 44% of the 0.9 MPa standard type limit.

Quick checklist

  • ✓ Body size for your peak flow (1/4" here)
  • ✓ Standard 0.9 MPa or lower-pressure 0.4 MPa
  • ✓ Bowl material: PC (blank), Metal (C), Nylon (N)
  • ✓ Drain: semi-auto + manual, or automatic
  • ✓ Element 40 µm or 5 µm
  • ✓ Thread & gauge scale (PT / G / NPT)
Ask an Engineer

Installation & Maintenance Notes

  • check Install with the airflow arrow: filter first, lubricator last.
  • check Keep inlet pressure at or below 1.0 MPa (145 psi).
  • check Fill the oil bowl with ISO VG 32 or equivalent only.
  • check Drain condensate before the 60 cc bowl fills.
  • check Keep the unit above freezing (-5 to +70 °C, unfreeze).
  • check Support the 1300 g unit on its bracket, not on the tubing.

The lubricator adds an oil mist downstream of the regulator. If any part of the line must stay oil-free, use a filter-regulator instead of an F.R.L. combination on that branch.

Airtac GAC F.R.L. Unit GAC30008ALNWTK FAQ

This lower-pressure type operates at 0.15-0.4 MPa (20-58 psi) with a maximum pressure of 1.0 MPa (145 psi) and a proof pressure of 1.5 MPa (215 psi). The temperature range is -5 to 70 C, and the recommended lubricant is ISO VG 32. It features a 60 cc drain bowl, a 98 cc oil bowl, and weighs 1300 g.

The N in the code means no gauge is supplied from the factory, but the body has a 1/8in gauge connection so you can mount one to read the set pressure. The K code indicates a reverse-flow (reflux) valve is fitted, which the catalogue details on its own page as a separate pneumatic symbol.

T selects NPT port threads, the North American taper pipe standard. Without it the same order code has PT (Rc) ports, and with G it has G (BSPP) ports; body, function and dimensions do not change.

verified

Authorized Export Seller

Genuine AirTAC parts produced by AirTAC factory.

workspace_premium

1-Year Warranty

Covers non-human-caused product damage.

local_shipping

Fast Dispatch

Most standard models are dispatched in 3-5 days.

bolt

Fast Reply

Most inquiries answered within 7 hours.

Request a Quote for Airtac GAC F.R.L. Unit GAC30008ALNWTK

Send us the quantity, thread type (PT / G / NPT) and destination. We confirm price, availability and lead time — usually within 7 hours.

Thank you. We received your request for GAC30008ALNWTK and will confirm price, availability and lead time — usually within 7 hours.

For the fastest response, keep the complete model number above and include a clear photo of the product label. If photo upload is unavailable, email photos to [email protected] with your model number.