
The AirTAC GAF Filter GAF30008 is a genuine compressed-air filter. Its diversion structure spins the air to separate liquid water and trap solid particles down to 40 µm, protecting downstream valves and tools. It has 1/4" ports and a 60 cc drain bowl. It is a filter only — it does not regulate or set pressure.
The GAF30008 is a genuine AirTAC air filter that spins incoming air to throw liquid water and solid particles into its 60 cc drain bowl, while the HDPE core traps fine grain. It is a filter only, with no regulator and no pressure gauge, so it cleans the air but never sets or controls pressure.
This 1/4in model ships with a PC bowl, a 40 um element, and both semi-auto and manual drains fitted. Its 360 g mass and 6000 L/min flow envelope place it in the GAF300 size class, a step up from the 200 g GAF200 body for lines that need more condensate capacity.
| Model | Airtac GAF Filter GAF30008 |
|---|---|
| Series | GAF300 air filter |
| Port size | 1/4" (PT thread) |
| Filtering grade | 40 µm |
| Pressure range | 0.15 - 0.9 MPa (20 - 130 psi) |
| Bowl material | PC |
| Drain type | Semi-auto drain + manual drain |
| Bracket | Included |
| Fluid | Air |
|---|---|
| Proof pressure | 1.5 MPa (215 psi) |
| Temperature range | -5 to +70 °C (unfreeze) |
| Capacity of drain bowl | 60 cc |
| Element | HDPE filter core |
| Weight | 360 g |
Specifications follow the official AirTAC GAF catalogue (pages 225-226). Air must not freeze in the unit. This is a filter only — it separates water and solid particles but does not set or hold a downstream pressure. To regulate pressure as well, use the matching GAFR300 filter-regulator.
| GAF300 | GA300 series air filter — sets the port range, drain-bowl capacity and weight. |
|---|---|
| (blank) | Bowl material: PC. Available on this body: PC (blank), Metal (C), Nylon (N). |
| 08 | Port size 1/4". This body offers 08 = 1/4", 10 = 3/8", 15 = 1/2". |
| (blank) | Drain: Semi-auto drain + manual drain. |
| (blank) | Mounting bracket included. |
| (blank) | Filtering grade 40 µm. |
| (blank) | PT port thread. |
A GAF has no regulator and no pressure gauge — there is no type, gauge or reflux code. Need to regulate pressure too? The matching GAFR300-08 is the same filter with a built-in regulator.
Figures are the end of the flow curve plotted in the AirTAC catalogue — a sizing envelope for comparing bodies, not a rated flow. Read the catalogue curve for a real duty point. A filter this size drops less pressure at flow than the same-body GAFR filter-regulator, so match it to your peak demand.
| This model | GAF300 · 1/4" · curve to 6000 L/min |
|---|---|
| One size down | GAF200 |
| One size up | GAF400 (curve to 8000 L/min) |
| Add regulation | GAFR300-08 (filter + regulator) |
Mount the GAF30008 upstream of a single solenoid valve on a jig or fixture. Its 40 um element stops scale and rust from reaching the valve seat, while the 60 cc bowl collects water before it can cause corrosion.
Use this 1/4in filter on a dedicated line to a compact cylinder. The diversion structure keeps pressure loss low, and the semi-auto drain purges condensate each time the air supply cycles off.
Install the GAF30008 at a bench outlet feeding hand tools or a blow gun. The included bracket secures it to the wall, and the manual drain lets you empty the bowl quickly at the end of a shift.
Choose the GAF30008 for a 1/4in line that needs clean air ahead of a valve or small cylinder. The PC bowl suits general shop air, while the included bracket lets you mount it to a panel or frame instead of supporting it from the tubing. Both a semi-auto drain and a manual drain are fitted, so you can purge the bowl on a schedule or by hand. The 40 um element handles typical workshop dirt, and the PT port thread matches standard local fittings. If you also need to set a downstream pressure, pair this filter with a GAR regulator or step up to the GAFR300-08 filter-regulator. The GAF300's 60 cc bowl holds about 2.4x the condensate of the GAF200's 25 cc bowl, so you will drain it less often.
AirtacDistr lists every GAF300 order code with its price on one page at https://airtacdistr.com/products/airtac-gaf300-air-filter
Quick checklist
This is a filter only — it removes water and solid particles but adds no pressure control and no lubrication. Add a GAR regulator, a GAL lubricator, or step up to the GAFR300-08 filter-regulator as your air-prep needs grow.
The GAF30008 is a 1/4in air filter with a 40 um HDPE element. Its working pressure range is 0.15-0.9 MPa (20-130 psi), with a proof pressure of 1.5 MPa (215 psi). It operates from -5 to 70 C and must not freeze. The drain bowl holds 60 cc and the unit weighs 360 g.
The GAF30008 ships with two drain mechanisms. The semi-auto drain opens automatically when the air supply is turned off, dumping accumulated condensate. The manual drain is a separate valve you can open by hand at any time to purge the bowl without removing it.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Most standard models are dispatched in 3-5 days.
Most inquiries answered within 7 hours.
Send us the quantity, thread type (PT / G / NPT) and destination. We confirm price, availability and lead time — usually within 7 hours.