
The AirTAC GAC F.R.L. Unit GAC30008ALTK is a genuine three-unit F.R.L. combination — a filter, a pressure regulator and a lubricator pre-assembled on one bracket with quick mounting clamps. It has 1/4" ports, a 40 µm filter element and regulates 0.15 - 0.4 MPa (20 - 58 psi).
Delivering cleaned, regulated and lubricated air for downstream pneumatics, this GAC30008ALTK combination pre-assembles a filter, regulator and lubricator on a single L-shape bracket. The 1/4in ported body carries a 40 um element and a PC bowl, while the lower-pressure type governs output to 0.15-0.4 MPa (20-58 psi). A circular gauge reading MPa/psi is fitted for the default NPT threads.
Air passes through the filter first, then the regulator, with oil mist added last so the internal seat never fouls. The automatic drain clears condensate from the 60 cc bowl without an operator, and the reverse-flow (reflux) valve is fitted, appearing as a separate pneumatic symbol in the catalogue. Weighing 1300 g, the assembly shares its 1/4in port with the GAF300-08, GAR300-08 and GAL300-08 service replacements.
| Model | Airtac GAC F.R.L. Unit GAC30008ALTK |
|---|---|
| Series | GAC300 F.R.L. combination |
| Port size | 1/4" (NPT thread) |
| Filtering grade | 40 µm |
| Pressure range | 0.15 - 0.4 MPa (20 - 58 psi) |
| Type | Lower pressure |
| Bowl material | PC |
| Drain type | Automatic drain |
| Fluid | Air |
|---|---|
| Max. pressure | 1.0 MPa (145 psi) |
| Proof pressure | 1.5 MPa (215 psi) |
| Temperature range | -5 to +70 °C (unfreeze) |
| Capacity of drain bowl | 60 cc |
| Capacity of oil bowl | 98 cc |
| Recommended lubricant | ISO VG 32 or equivalent |
| Weight | 1300 g |
Specifications follow the official AirTAC GAC catalogue (pages 216-217). Air must not freeze in the unit. The fitted circular gauge reads in psi / bar, set by the NPT thread code.
| GAC300 | GA300 series F.R.L. unit — sets ports, bowl capacity and weight. |
|---|---|
| (blank) | Bowl material: PC. Available on this body: PC (blank), Metal (C), Nylon (N). |
| 08 | Port size 1/4". This body offers 08 = 1/4", 10 = 3/8", 15 = 1/2". |
| A | Drain: Automatic drain. |
| L | Lower pressure type — 0.15 - 0.4 MPa (20 - 58 psi). This body offers Standard (S) or Lower pressure (L). |
| (blank) | Circular pressure gauge fitted. |
| (blank) | Filtering grade 40 µm. |
| T | NPT thread; gauge scale psi / bar. |
| K | Reverse-flow (reflux) valve attached. |
Constituent units, orderable separately as spares: GAF300-08 filter, GAR300-08 regulator, GAL300-08 lubricator — all three share this body and port.
Figures are the end of the flow curve plotted in the AirTAC catalogue at 0.7 MPa inlet pressure — a sizing envelope for comparing bodies, not a rated flow. Read the catalogue curve for a real duty point. Outlet pressure falls as flow rises, so size a body with headroom above your peak demand.
| This model | GAC300 · 1/4" · curve to 3000 L/min |
|---|---|
| One size down | GAC200 |
| One size up | GAC400 (curve to 6000 L/min) |
| Build order | Filter → bracket → regulator → lubricator |
Feeds delicate pneumatic grippers on electronics assembly lines where actuator force must stay below 0.4 MPa to protect fragile components.
Conditions air for low-pressure sealing jaws in vertical packaging equipment, ensuring consistent clamp pressure without rupturing thin films.
Supplies metered, lubricated air to benchtop spinning tools and small valves that require stable, low-pressure operation for precision tasks.
Choose this 1/4in unit when a machine demands a strict 0.15-0.4 MPa (20-58 psi) ceiling, as exceeding that range requires the standard type instead. The PC bowl suits general ambient conditions within the -5 to 70 C window, and the fitted NPT gauge lets technicians read the set pressure directly in MPa/psi. Because the lubricator introduces oil mist downstream, select a separate filter-regulator if the application requires a dry, oil-free supply. The reverse-flow valve is included as an ordering distinction, and the 40 um element balances protection with service frequency. Stepping down to the GAC200 shrinks the plotted flow envelope from 3000 L/min to 1750 L/min at 0.7 MPa inlet, whereas the 0.4 MPa ceiling is 44% of the standard 0.9 MPa maximum.
Quick checklist
The lubricator adds an oil mist downstream of the regulator. If any part of the line must stay oil-free, use a filter-regulator instead of an F.R.L. combination on that branch.
This lower-pressure F.R.L. combination operates at 0.15-0.4 MPa (20-58 psi) with a maximum pressure of 1.0 MPa (145 psi) and a proof pressure of 1.5 MPa (215 psi). It features a 1/4in port, a 60 cc drain bowl, a 98 cc oil bowl, a 40 um element, and a temperature range of -5 to 70 C. The unit weighs 1300 g and uses ISO VG 32 lubricant.
The K indicates that a reverse-flow (reflux) valve is attached to this specific assembly. The catalogue lists this component as a distinct pneumatic symbol on its own page, and it is included here alongside the automatic drain and the standard 40 um filtration grade.
T selects NPT port threads, the North American taper pipe standard. Without it the same order code has PT (Rc) ports, and with G it has G (BSPP) ports; body, function and dimensions do not change.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Most standard models are dispatched in 3-5 days.
Most inquiries answered within 7 hours.
Send us the quantity, thread type (PT / G / NPT) and destination. We confirm price, availability and lead time — usually within 7 hours.