
The AirTAC GAC F.R.L. Unit GAC30008ALWT is a genuine three-unit F.R.L. combination — a filter, a pressure regulator and a lubricator pre-assembled on one bracket with quick mounting clamps. It has 1/4" ports, a 5 µm filter element and regulates 0.15 - 0.4 MPa (20 - 58 psi).
Delivering cleaned, regulated and lubricated air, this GAC30008ALWT assembly integrates a filter, regulator and lubricator on a single L-shape bracket with quick mounting clamps. The 1/4in port routes air through a 5 um element before the regulator sets a lower 0.15-0.4 MPa (20-58 psi) output. Because the lubricator sits last in the sequence, oil mist is introduced downstream of the regulator seat, preventing fouling of the internal pressure-control mechanisms.
Weighing 1300 g, the unit pairs a 60 cc condensate bowl with a 98 cc oil reservoir. The automatic drain actively clears the accumulated 60 cc of liquid without an operator, which is decisive for unattended or wet lines. A circular gauge is fitted to read the set pressure in MPa/psi, matching the default NPT thread scale, and the system runs on ISO VG 32 lubricant across a -5 to 70 C range.
| Model | Airtac GAC F.R.L. Unit GAC30008ALWT |
|---|---|
| Series | GAC300 F.R.L. combination |
| Port size | 1/4" (NPT thread) |
| Filtering grade | 5 µm |
| Pressure range | 0.15 - 0.4 MPa (20 - 58 psi) |
| Type | Lower pressure |
| Bowl material | PC |
| Drain type | Automatic drain |
| Fluid | Air |
|---|---|
| Max. pressure | 1.0 MPa (145 psi) |
| Proof pressure | 1.5 MPa (215 psi) |
| Temperature range | -5 to +70 °C (unfreeze) |
| Capacity of drain bowl | 60 cc |
| Capacity of oil bowl | 98 cc |
| Recommended lubricant | ISO VG 32 or equivalent |
| Weight | 1300 g |
Specifications follow the official AirTAC GAC catalogue (pages 216-217). Air must not freeze in the unit. The fitted circular gauge reads in psi / bar, set by the NPT thread code.
| GAC300 | GA300 series F.R.L. unit — sets ports, bowl capacity and weight. |
|---|---|
| (blank) | Bowl material: PC. Available on this body: PC (blank), Metal (C), Nylon (N). |
| 08 | Port size 1/4". This body offers 08 = 1/4", 10 = 3/8", 15 = 1/2". |
| A | Drain: Automatic drain. |
| L | Lower pressure type — 0.15 - 0.4 MPa (20 - 58 psi). This body offers Standard (S) or Lower pressure (L). |
| (blank) | Circular pressure gauge fitted. |
| W | Filtering grade 5 µm. |
| T | NPT thread; gauge scale psi / bar. |
| (blank) | No reverse-flow valve. |
Constituent units, orderable separately as spares: GAF300-08 filter, GAR300-08 regulator, GAL300-08 lubricator — all three share this body and port.
Figures are the end of the flow curve plotted in the AirTAC catalogue at 0.7 MPa inlet pressure — a sizing envelope for comparing bodies, not a rated flow. Read the catalogue curve for a real duty point. Outlet pressure falls as flow rises, so size a body with headroom above your peak demand.
| This model | GAC300 · 1/4" · curve to 3000 L/min |
|---|---|
| One size down | GAC200 |
| One size up | GAC400 (curve to 6000 L/min) |
| Build order | Filter → bracket → regulator → lubricator |
Feeds low-pressure cylinders and grippers used in analytical instruments where a 0.15-0.4 MPa output prevents damage to delicate glass or plastic components.
Conditions air for sealing jaws and film feed mechanisms, relying on the 5 um element to protect small precision valves from particulate wear.
Supplies a regulated 1/4in line for benchtop grinders and screwdrivers, adding necessary oil mist downstream while the automatic drain handles condensate.
Choose this PC bowl configuration for general environments, or step up to a metal bowl for aggressive surroundings; the common 1.0 MPa maximum and -5 to 70 C limits remain identical across materials. The 5 um element traps far finer particles than the standard 40 um grade, suiting precision valves at the cost of more frequent element service. If the machine may ever need more than 0.4 MPa, this lower-pressure part is the wrong choice, as the L type tops out at 0.4 MPa. The three units are separately orderable as GAF300-08, GAR300-08 and GAL300-08, so a clogged element does not mean replacing the whole assembly. Remember that the 0.4 MPa ceiling is 44% of the Standard type's 0.9 MPa maximum.
Quick checklist
The lubricator adds an oil mist downstream of the regulator. If any part of the line must stay oil-free, use a filter-regulator instead of an F.R.L. combination on that branch.
This lower-pressure type operates at 0.15-0.4 MPa (20-58 psi) with a max pressure of 1.0 MPa (145 psi) and a proof pressure of 1.5 MPa (215 psi). The temperature range is -5 to 70 C, the filtering grade is 5 um, and it weighs 1300 g. The drain bowl holds 60 cc, the oil bowl holds 98 cc, and the recommended lubricant is ISO VG 32.
The 5 um element captures very fine particles for precision equipment but requires more frequent checking than the standard 40 um option. The automatic drain empties the 60 cc condensate bowl whenever liquid accumulates, removing the need for manual intervention on wet lines.
T selects NPT port threads, the North American taper pipe standard. Without it the same order code has PT (Rc) ports, and with G it has G (BSPP) ports; body, function and dimensions do not change.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Most standard models are dispatched in 3-5 days.
Most inquiries answered within 7 hours.
Send us the quantity, thread type (PT / G / NPT) and destination. We confirm price, availability and lead time — usually within 7 hours.