
The AirTAC GAC F.R.L. Unit GAC30008ALWTK is a genuine three-unit F.R.L. combination — a filter, a pressure regulator and a lubricator pre-assembled on one bracket with quick mounting clamps. It has 1/4" ports, a 5 µm filter element and regulates 0.15 - 0.4 MPa (20 - 58 psi).
Delivering cleaned, regulated and lubricated air for downstream pneumatics, this AirTAC GAC30008ALWTK combines a filter, regulator and lubricator on a single L-shape bracket. The 1/4in ported body carries a 5 um element for trapping fine particulates, operating within a lower pressure range of 0.15-0.4 MPa (20-58 psi). Because the lubricator sits last in the sequence, oil mist is introduced downstream of the regulator seat, preventing fouling of the pressure-control mechanism.
Weighing 1300 g, the assembly features a PC bowl and an automatic drain that clears the 60 cc condensate sump without operator intervention. A circular gauge is fitted, reading MPa/psi for the default NPT thread, while the included reverse-flow (reflux) valve appears as a separate pneumatic symbol in the catalogue. If the downstream line must remain strictly oil-free, omit the lubricator and choose a dedicated filter-regulator instead.
| Model | Airtac GAC F.R.L. Unit GAC30008ALWTK |
|---|---|
| Series | GAC300 F.R.L. combination |
| Port size | 1/4" (NPT thread) |
| Filtering grade | 5 µm |
| Pressure range | 0.15 - 0.4 MPa (20 - 58 psi) |
| Type | Lower pressure |
| Bowl material | PC |
| Drain type | Automatic drain |
| Fluid | Air |
|---|---|
| Max. pressure | 1.0 MPa (145 psi) |
| Proof pressure | 1.5 MPa (215 psi) |
| Temperature range | -5 to +70 °C (unfreeze) |
| Capacity of drain bowl | 60 cc |
| Capacity of oil bowl | 98 cc |
| Recommended lubricant | ISO VG 32 or equivalent |
| Weight | 1300 g |
Specifications follow the official AirTAC GAC catalogue (pages 216-217). Air must not freeze in the unit. The fitted circular gauge reads in psi / bar, set by the NPT thread code.
| GAC300 | GA300 series F.R.L. unit — sets ports, bowl capacity and weight. |
|---|---|
| (blank) | Bowl material: PC. Available on this body: PC (blank), Metal (C), Nylon (N). |
| 08 | Port size 1/4". This body offers 08 = 1/4", 10 = 3/8", 15 = 1/2". |
| A | Drain: Automatic drain. |
| L | Lower pressure type — 0.15 - 0.4 MPa (20 - 58 psi). This body offers Standard (S) or Lower pressure (L). |
| (blank) | Circular pressure gauge fitted. |
| W | Filtering grade 5 µm. |
| T | NPT thread; gauge scale psi / bar. |
| K | Reverse-flow (reflux) valve attached. |
Constituent units, orderable separately as spares: GAF300-08 filter, GAR300-08 regulator, GAL300-08 lubricator — all three share this body and port.
Figures are the end of the flow curve plotted in the AirTAC catalogue at 0.7 MPa inlet pressure — a sizing envelope for comparing bodies, not a rated flow. Read the catalogue curve for a real duty point. Outlet pressure falls as flow rises, so size a body with headroom above your peak demand.
| This model | GAC300 · 1/4" · curve to 3000 L/min |
|---|---|
| One size down | GAC200 |
| One size up | GAC400 (curve to 6000 L/min) |
| Build order | Filter → bracket → regulator → lubricator |
Feeds sensitive solenoid valve banks requiring low operating pressure and the 5 um filtration provided by this unit to prevent spool sticking.
Conditions air for low-force actuation in test fixtures, where the 0.15-0.4 MPa range prevents overpressurization of delicate glass or plastic components.
Supplies regulated, lubricated air to low-torque pneumatic screwdrivers on an assembly line, extending tool life via downstream oil mist injection.
Selecting this configuration means accepting the 0.15-0.4 MPa (20-58 psi) lower-pressure ceiling; if the machine might ever demand more than 58 psi, the standard type S is the correct choice. The 5 um element provides finer protection for precision valves compared to the 40 um standard, though it requires more frequent element service. Condensate management is fully unattended thanks to the automatic drain, and the three units are separately orderable as GAF300-08, GAR300-08 and GAL300-08 if a single component fails. The catalogue flow curve for the GAC300 is plotted to 3000 L/min at 0.7 MPa inlet, which is double the 1750 L/min envelope of the smaller GAC200 body. When sizing the supply, remember that the 0.4 MPa maximum is 44% of the standard type's 0.9 MPa ceiling.
Quick checklist
The lubricator adds an oil mist downstream of the regulator. If any part of the line must stay oil-free, use a filter-regulator instead of an F.R.L. combination on that branch.
This lower-pressure type operates at 0.15-0.4 MPa (20-58 psi) with a maximum pressure of 1.0 MPa (145 psi) and a proof pressure of 1.5 MPa (215 psi). The temperature range is -5 to 70 C. It features a 60 cc drain bowl, a 98 cc oil bowl, uses ISO VG 32 lubricant, and weighs 1300 g.
The K indicates that a reverse-flow (reflux) valve is fitted to this assembly. The catalogue depicts this as a separate pneumatic symbol with specific details on its own page, representing an ordering difference for the unit.
T selects NPT port threads, the North American taper pipe standard. Without it the same order code has PT (Rc) ports, and with G it has G (BSPP) ports; body, function and dimensions do not change.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Most standard models are dispatched in 3-5 days.
Most inquiries answered within 7 hours.
Send us the quantity, thread type (PT / G / NPT) and destination. We confirm price, availability and lead time — usually within 7 hours.