
The AirTAC GAC F.R.L. Unit GAC30008ASNTK is a genuine three-unit F.R.L. combination — a filter, a pressure regulator and a lubricator pre-assembled on one bracket with quick mounting clamps. It has 1/4" ports, a 40 µm filter element and regulates 0.15 - 0.9 MPa (20 - 130 psi).
Delivering cleaned, regulated and lubricated air for pneumatic systems, this AirTAC F.R.L. combination integrates a filter, regulator and lubricator on a single L-shape bracket. The 1/4in ported GAC300 body operates at 0.15-0.9 MPa (20-130 psi) and uses a 40 um element to capture solid particles. An automatic drain clears condensate from the 60 cc bowl without operator intervention, making it well suited for unattended machinery.
Because the lubricator sits last in the sequence, oil mist is added downstream of the regulator seat to prevent fouling. This specific configuration ships without a pressure gauge, though a 1/8in connection is provided if you need to add one later. The assembly includes a reverse-flow (reflux) valve, which the catalogue illustrates as a separate pneumatic symbol on its own page, and relies on quick mounting clamps to eliminate inter-unit tubing leaks. Order code GAC30008ASNTK has NPT ports (the T in the code) for North American pipe fittings.
| Model | Airtac GAC F.R.L. Unit GAC30008ASNTK |
|---|---|
| Series | GAC300 F.R.L. combination |
| Port size | 1/4" (NPT thread) |
| Filtering grade | 40 µm |
| Pressure range | 0.15 - 0.9 MPa (20 - 130 psi) |
| Type | Standard |
| Bowl material | PC |
| Drain type | Automatic drain |
| Fluid | Air |
|---|---|
| Max. pressure | 1.0 MPa (145 psi) |
| Proof pressure | 1.5 MPa (215 psi) |
| Temperature range | -5 to +70 °C (unfreeze) |
| Capacity of drain bowl | 60 cc |
| Capacity of oil bowl | 98 cc |
| Recommended lubricant | ISO VG 32 or equivalent |
| Weight | 1300 g |
Specifications follow the official AirTAC GAC catalogue (pages 216-217). Air must not freeze in the unit. No gauge is supplied with this model — the gauge connection on a GAC300 is 1/8" if you add one.
| GAC300 | GA300 series F.R.L. unit — sets ports, bowl capacity and weight. |
|---|---|
| (blank) | Bowl material: PC. Available on this body: PC (blank), Metal (C), Nylon (N). |
| 08 | Port size 1/4". This body offers 08 = 1/4", 10 = 3/8", 15 = 1/2". |
| A | Drain: Automatic drain. |
| S | Standard type — 0.15 - 0.9 MPa (20 - 130 psi). This body offers Standard (S) or Lower pressure (L). |
| N | No pressure gauge; 1/8" gauge connection. |
| (blank) | Filtering grade 40 µm. |
| T | NPT thread; gauge scale psi / bar. |
| K | Reverse-flow (reflux) valve attached. |
Constituent units, orderable separately as spares: GAF300-08 filter, GAR300-08 regulator, GAL300-08 lubricator — all three share this body and port.
Figures are the end of the flow curve plotted in the AirTAC catalogue at 0.7 MPa inlet pressure — a sizing envelope for comparing bodies, not a rated flow. Read the catalogue curve for a real duty point. Outlet pressure falls as flow rises, so size a body with headroom above your peak demand.
| This model | GAC300 · 1/4" · curve to 3000 L/min |
|---|---|
| One size down | GAC200 |
| One size up | GAC400 (curve to 6000 L/min) |
| Build order | Filter → bracket → regulator → lubricator |
Prepares compressed air for multi-station assembly machinery where the automatic drain handles condensate during continuous shift production.
Conditions air for flow wrappers and sealing actuators, providing the stable 1/4in port pressure needed for repeatable film feeding.
Supplies oil-misted air to pneumatic diverters and pushers on conveyor sorting lines, protecting moving seals from rapid wear.
Choose this 1300 g assembly when feeding a mid-size actuator or local machine header that requires steady pressure and automatic condensate management. The PC bowl offers standard impact resistance for typical factory environments, while the 40 um element balances particle capture with a reasonable service interval. If your downstream line must remain strictly oil-free, omit the lubricator and select a dedicated filter-regulator instead. For maintenance, the three units are separately orderable as GAF300-08, GAR300-08 and GAL300-08, so a damaged bowl does not require replacing the entire assembly. Stepping down to the GAC200 body reduces the plotted flow envelope from 3000 L/min to 1750 L/min at 0.7 MPa inlet, meaning the smaller body handles roughly 58% of this unit's capacity. Keep in mind that with a maximum supply of 1.0 MPa and a Standard type regulating up to 0.9 MPa, there is only about 0.1 MPa of headroom above the top setting.
Quick checklist
The lubricator adds an oil mist downstream of the regulator. If any part of the line must stay oil-free, use a filter-regulator instead of an F.R.L. combination on that branch.
This standard type unit regulates from 0.15-0.9 MPa (20-130 psi) with a maximum pressure of 1.0 MPa (145 psi) and a proof pressure of 1.5 MPa (215 psi). It operates in temperatures from -5 to 70 C, features a 60 cc drain bowl and a 98 cc oil bowl, uses ISO VG 32 lubricant, and weighs 1300 g.
The N in the ordering code indicates no gauge is supplied, meaning the set pressure cannot be read without adding one. The body features a 1/8in gauge connection for easy field installation if visual pressure monitoring becomes necessary.
T selects NPT port threads, the North American taper pipe standard. Without it the same order code has PT (Rc) ports, and with G it has G (BSPP) ports; body, function and dimensions do not change.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Most standard models are dispatched in 3-5 days.
Most inquiries answered within 7 hours.
Send us the quantity, thread type (PT / G / NPT) and destination. We confirm price, availability and lead time — usually within 7 hours.