
The AirTAC GAC F.R.L. Unit GAC30008ASWT is a genuine three-unit F.R.L. combination — a filter, a pressure regulator and a lubricator pre-assembled on one bracket with quick mounting clamps. It has 1/4" ports, a 5 µm filter element and regulates 0.15 - 0.9 MPa (20 - 130 psi).
Delivering cleaned, regulated and lubricated air for downstream pneumatics, this GAC30008ASWT assembly integrates a filter, regulator and lubricator on a single L-shape bracket. The 1/4in ported body carries a 5 um element that captures fine particulates before they reach precision valves. Air passes through the filter first, then the regulator sets the 0.15-0.9 MPa (20-130 psi) working pressure, and finally oil mist is introduced downstream so the regulator seat stays clean.
Weighing 1300 g, the unit pairs a 60 cc condensate bowl with a 98 cc oil reservoir. Because the code carries the A suffix, an automatic drain actively expels collected water without an operator present. A circular gauge is fitted to read the set pressure in MPa and psi, matching the default NPT thread scale.
Spares follow the GAF300-08, GAR300-08 and GAL300-08 part numbers, meaning a clogged filter or damaged bowl does not require replacing the whole assembly. The catalogue flow curve for the GAC300 is plotted to 3000 L/min at 0.7 MPa inlet, which is roughly double the 1750 L/min envelope of the smaller GAC200, giving you a clear sizing path if a single actuator outgrows its supply.
| Model | Airtac GAC F.R.L. Unit GAC30008ASWT |
|---|---|
| Series | GAC300 F.R.L. combination |
| Port size | 1/4" (NPT thread) |
| Filtering grade | 5 µm |
| Pressure range | 0.15 - 0.9 MPa (20 - 130 psi) |
| Type | Standard |
| Bowl material | PC |
| Drain type | Automatic drain |
| Fluid | Air |
|---|---|
| Max. pressure | 1.0 MPa (145 psi) |
| Proof pressure | 1.5 MPa (215 psi) |
| Temperature range | -5 to +70 °C (unfreeze) |
| Capacity of drain bowl | 60 cc |
| Capacity of oil bowl | 98 cc |
| Recommended lubricant | ISO VG 32 or equivalent |
| Weight | 1300 g |
Specifications follow the official AirTAC GAC catalogue (pages 216-217). Air must not freeze in the unit. The fitted circular gauge reads in psi / bar, set by the NPT thread code.
| GAC300 | GA300 series F.R.L. unit — sets ports, bowl capacity and weight. |
|---|---|
| (blank) | Bowl material: PC. Available on this body: PC (blank), Metal (C), Nylon (N). |
| 08 | Port size 1/4". This body offers 08 = 1/4", 10 = 3/8", 15 = 1/2". |
| A | Drain: Automatic drain. |
| S | Standard type — 0.15 - 0.9 MPa (20 - 130 psi). This body offers Standard (S) or Lower pressure (L). |
| (blank) | Circular pressure gauge fitted. |
| W | Filtering grade 5 µm. |
| T | NPT thread; gauge scale psi / bar. |
| (blank) | No reverse-flow valve. |
Constituent units, orderable separately as spares: GAF300-08 filter, GAR300-08 regulator, GAL300-08 lubricator — all three share this body and port.
Figures are the end of the flow curve plotted in the AirTAC catalogue at 0.7 MPa inlet pressure — a sizing envelope for comparing bodies, not a rated flow. Read the catalogue curve for a real duty point. Outlet pressure falls as flow rises, so size a body with headroom above your peak demand.
| This model | GAC300 · 1/4" · curve to 3000 L/min |
|---|---|
| One size down | GAC200 |
| One size up | GAC400 (curve to 6000 L/min) |
| Build order | Filter → bracket → regulator → lubricator |
Feeds clean, oiled air at a stable pressure to pneumatic tool-change cylinders on machining centres, protecting precision sliding spools from fine swarf.
Conditions the supply for high-cycle sealing and cutting actuators, ensuring consistent force and lubrication for continuous packaging lines.
Regulates and lubricates the air feeding small-bore diverting cylinders on sorting conveyors, with the auto drain handling condensate in humid dispatch areas.
Choose this standard type S unit for general machine air prep where the 0.15-0.9 MPa (20-130 psi) range covers the working pressure, but select a separate filter-regulator if the downstream line must remain strictly oil-free. The 5 um W element traps far finer grit than the standard 40 um grade, trading slightly more frequent element service for better protection of sensitive instruments. The automatic drain makes it suitable for unattended or wet lines, while the fitted NPT-thread gauge lets technicians verify the set pressure directly in MPa and psi.
If the 1/4in port restricts a larger manifold, stepping up to the GAC400 body provides a 100 cc drain bowl and a 6000 L/min plotted flow envelope at 0.7 MPa inlet. For this GAC300 unit, the 1.0 MPa (145 psi) maximum supply leaves only about 0.1 MPa of headroom above the 0.9 MPa standard setting, so plan a supply near maximum if you truly need that upper outlet pressure.
Quick checklist
The lubricator adds an oil mist downstream of the regulator. If any part of the line must stay oil-free, use a filter-regulator instead of an F.R.L. combination on that branch.
This model operates at a standard pressure range of 0.15-0.9 MPa (20-130 psi) with a maximum pressure of 1.0 MPa (145 psi) and a proof pressure of 1.5 MPa (215 psi). It features a 1/4in port, a 5 um element, an automatic drain, and a PC bowl. The ambient and fluid temperature range is -5 to 70 C. The drain bowl capacity is 60 cc and the oil bowl capacity is 98 cc, with a total unit weight of 1300 g. The recommended lubricant is ISO VG 32.
The W in the ordering code specifies a 5 um filtering grade instead of the default 40 um. This finer element traps smaller solid particles, making it ideal for protecting sensitive pneumatic valves, pilot circuits and instrument air from grit. The trade-off is that the finer mesh can clog faster in dirty environments, so the filter element requires more frequent inspection and replacement.
T selects NPT port threads, the North American taper pipe standard. Without it the same order code has PT (Rc) ports, and with G it has G (BSPP) ports; body, function and dimensions do not change.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Most standard models are dispatched in 3-5 days.
Most inquiries answered within 7 hours.
Send us the quantity, thread type (PT / G / NPT) and destination. We confirm price, availability and lead time — usually within 7 hours.