
The AirTAC GAC F.R.L. Unit GAC30008ASWTK is a genuine three-unit F.R.L. combination — a filter, a pressure regulator and a lubricator pre-assembled on one bracket with quick mounting clamps. It has 1/4" ports, a 5 µm filter element and regulates 0.15 - 0.9 MPa (20 - 130 psi).
Delivering cleaned, regulated and lubricated air for downstream pneumatics, this AirTAC F.R.L. combination pre-assembles a filter, regulator and lubricator on a single L-shape bracket with quick mounting clamps. This order code has NPT ports (the T in the code); the PT and G versions are separate order codes.
Air passes through the filter first, then the regulator, so the lubricator adds oil mist downstream of the regulator seat to prevent fouling. The automatic drain clears condensate from the 60 cc bowl without an operator, which is decisive for unattended or wet lines. This model also carries the reverse-flow (reflux) valve, which the catalogue shows as a separate pneumatic symbol with details on its own page. Order code GAC30008ASWTK has NPT ports (the T in the code) for North American pipe fittings.
| Model | Airtac GAC F.R.L. Unit GAC30008ASWTK |
|---|---|
| Series | GAC300 F.R.L. combination |
| Port size | 1/4" (NPT thread) |
| Filtering grade | 5 µm |
| Pressure range | 0.15 - 0.9 MPa (20 - 130 psi) |
| Type | Standard |
| Bowl material | PC |
| Drain type | Automatic drain |
| Fluid | Air |
|---|---|
| Max. pressure | 1.0 MPa (145 psi) |
| Proof pressure | 1.5 MPa (215 psi) |
| Temperature range | -5 to +70 °C (unfreeze) |
| Capacity of drain bowl | 60 cc |
| Capacity of oil bowl | 98 cc |
| Recommended lubricant | ISO VG 32 or equivalent |
| Weight | 1300 g |
Specifications follow the official AirTAC GAC catalogue (pages 216-217). Air must not freeze in the unit. The fitted circular gauge reads in psi / bar, set by the NPT thread code.
| GAC300 | GA300 series F.R.L. unit — sets ports, bowl capacity and weight. |
|---|---|
| (blank) | Bowl material: PC. Available on this body: PC (blank), Metal (C), Nylon (N). |
| 08 | Port size 1/4". This body offers 08 = 1/4", 10 = 3/8", 15 = 1/2". |
| A | Drain: Automatic drain. |
| S | Standard type — 0.15 - 0.9 MPa (20 - 130 psi). This body offers Standard (S) or Lower pressure (L). |
| (blank) | Circular pressure gauge fitted. |
| W | Filtering grade 5 µm. |
| T | NPT thread; gauge scale psi / bar. |
| K | Reverse-flow (reflux) valve attached. |
Constituent units, orderable separately as spares: GAF300-08 filter, GAR300-08 regulator, GAL300-08 lubricator — all three share this body and port.
Figures are the end of the flow curve plotted in the AirTAC catalogue at 0.7 MPa inlet pressure — a sizing envelope for comparing bodies, not a rated flow. Read the catalogue curve for a real duty point. Outlet pressure falls as flow rises, so size a body with headroom above your peak demand.
| This model | GAC300 · 1/4" · curve to 3000 L/min |
|---|---|
| One size down | GAC200 |
| One size up | GAC400 (curve to 6000 L/min) |
| Build order | Filter → bracket → regulator → lubricator |
Feeds instrument air to sensitive solenoid valve banks using the 5 um element to prevent spool sticking in high-cycle packaging machinery.
Conditions air for pneumatic grippers on a 1/4in ported sorting module, relying on the automatic drain to handle condensate during wet washdown shifts.
Supplies a steady 0.15-0.9 MPa pressure with downstream oil mist to protect high-speed moving guide bearings from wear.
Choose this GAC300 body when a 1/4in port matches your flow needs, keeping in mind the catalogue flow curve for the GAC300 is plotted to 3000 L/min at 0.7 MPa inlet, whereas the smaller GAC200 is plotted to 1750 L/min. The PC bowl material suits general environments within the -5 to 70 C range, and the 5 um element provides finer filtration than the standard 40 um grade at the cost of more frequent element service. If your downstream line must stay oil-free, you must omit the lubricator and choose a filter-regulator instead. The three units are separately orderable as GAF300-08, GAR300-08 and GAL300-08, so a clogged element or damaged bowl does not require replacing the whole assembly. Stepping up from the GAC200 to this GAC300 doubles the plotted flow envelope, offering a 1.7x capacity increase for your system sizing.
Quick checklist
The lubricator adds an oil mist downstream of the regulator. If any part of the line must stay oil-free, use a filter-regulator instead of an F.R.L. combination on that branch.
This unit operates at 0.15-0.9 MPa (20-130 psi) with a maximum pressure of 1.0 MPa (145 psi) and a proof pressure of 1.5 MPa (215 psi). The temperature range is -5 to 70 C, the filtering grade is 5 um, the drain bowl holds 60 cc, the oil bowl holds 98 cc, the recommended lubricant is ISO VG 32, and the assembly weighs 1300 g.
The K indicates that a reverse-flow (reflux) valve is fitted to this specific F.R.L. combination. The official catalogue displays this component as a distinct pneumatic symbol located on its own dedicated page.
T selects NPT port threads, the North American taper pipe standard. Without it the same order code has PT (Rc) ports, and with G it has G (BSPP) ports; body, function and dimensions do not change.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Most standard models are dispatched in 3-5 days.
Most inquiries answered within 7 hours.
Send us the quantity, thread type (PT / G / NPT) and destination. We confirm price, availability and lead time — usually within 7 hours.