
The AirTAC GAC F.R.L. Unit GAC30008LNWT is a genuine three-unit F.R.L. combination — a filter, a pressure regulator and a lubricator pre-assembled on one bracket with quick mounting clamps. It has 1/4" ports, a 5 µm filter element and regulates 0.15 - 0.4 MPa (20 - 58 psi).
Delivering cleaned, regulated and lubricated air for sensitive pneumatics, this AirTAC unit combines a filter, regulator and lubricator on a single L-shape bracket. The 1/4in ported body is fitted with a 5 um element for trapping fine particles, and the lower-pressure type restricts the operating range to 0.15-0.4 MPa (20-58 psi). Air passes through the filter first, then the regulator, before oil mist is introduced downstream so the regulator seat never gets fouled.
Because the N after the port means no gauge is supplied, operators must add one to the 1/8in gauge connection to read the set pressure. The 60 cc condensate bowl and 98 cc oil sump dictate the maintenance frequency, and the semi-auto drain dumps water on every pressure drop. If your machine requires completely oil-free downstream air, omit the lubricator and choose a dedicated filter-regulator instead. Order code GAC30008LNWT has NPT ports (the T in the code) for North American pipe fittings.
| Model | Airtac GAC F.R.L. Unit GAC30008LNWT |
|---|---|
| Series | GAC300 F.R.L. combination |
| Port size | 1/4" (NPT thread) |
| Filtering grade | 5 µm |
| Pressure range | 0.15 - 0.4 MPa (20 - 58 psi) |
| Type | Lower pressure |
| Bowl material | PC |
| Drain type | Semi-auto drain + manual drain |
| Fluid | Air |
|---|---|
| Max. pressure | 1.0 MPa (145 psi) |
| Proof pressure | 1.5 MPa (215 psi) |
| Temperature range | -5 to +70 °C (unfreeze) |
| Capacity of drain bowl | 60 cc |
| Capacity of oil bowl | 98 cc |
| Recommended lubricant | ISO VG 32 or equivalent |
| Weight | 1300 g |
Specifications follow the official AirTAC GAC catalogue (pages 216-217). Air must not freeze in the unit. No gauge is supplied with this model — the gauge connection on a GAC300 is 1/8" if you add one.
| GAC300 | GA300 series F.R.L. unit — sets ports, bowl capacity and weight. |
|---|---|
| (blank) | Bowl material: PC. Available on this body: PC (blank), Metal (C), Nylon (N). |
| 08 | Port size 1/4". This body offers 08 = 1/4", 10 = 3/8", 15 = 1/2". |
| (blank) | Drain: Semi-auto drain + manual drain. |
| L | Lower pressure type — 0.15 - 0.4 MPa (20 - 58 psi). This body offers Standard (S) or Lower pressure (L). |
| N | No pressure gauge; 1/8" gauge connection. |
| W | Filtering grade 5 µm. |
| T | NPT thread; gauge scale psi / bar. |
| (blank) | No reverse-flow valve. |
Constituent units, orderable separately as spares: GAF300-08 filter, GAR300-08 regulator, GAL300-08 lubricator — all three share this body and port.
Figures are the end of the flow curve plotted in the AirTAC catalogue at 0.7 MPa inlet pressure — a sizing envelope for comparing bodies, not a rated flow. Read the catalogue curve for a real duty point. Outlet pressure falls as flow rises, so size a body with headroom above your peak demand.
| This model | GAC300 · 1/4" · curve to 3000 L/min |
|---|---|
| One size down | GAC200 |
| One size up | GAC400 (curve to 6000 L/min) |
| Build order | Filter → bracket → regulator → lubricator |
Conditions low-pressure air for sensitive analytical instruments, using the 5 um filter to protect delicate flow controllers from fine particulate.
Feeds small-bore pneumatic cylinders in electronics assembly where operating pressures must stay below 0.4 MPa to prevent component damage.
Supplies a steady, lubricated air supply to low-force pick-and-place heads, ensuring smooth cycling without overwhelming delicate suction cups.
Choose this 1300 g assembly for low-pressure circuits needing fine filtration, and mount it to a proper panel rather than suspending it from the tubing. The 5 um element catches far finer particulate than the standard 40 um grade, protecting precision valves at the cost of more frequent element swaps. The semi-auto and manual drain pair suits attended lines, while the NPT thread sets a MPa/psi gauge scale if you add one. Spares are ordered individually as GAF300-08, GAR300-08 and GAL300-08, so a damaged bowl does not force replacing the whole set. Stepping up to the GAC400 body raises the plotted flow envelope from 3000 L/min to 6000 L/min at 0.7 MPa inlet, doubling the capacity. Remember that 0.4 MPa is 44% of the 0.9 MPa standard ceiling, so verify your machine will never need higher pressure.
Quick checklist
The lubricator adds an oil mist downstream of the regulator. If any part of the line must stay oil-free, use a filter-regulator instead of an F.R.L. combination on that branch.
This lower-pressure type operates at 0.15-0.4 MPa (20-58 psi) with a maximum pressure of 1.0 MPa (145 psi) and a proof pressure of 1.5 MPa (215 psi). It handles temperatures from -5 to 70 C, weighs 1300 g, and features a 60 cc drain bowl alongside a 98 cc oil bowl. The recommended lubricant is ISO VG 32.
The N in the ordering code indicates that no circular gauge is supplied from the factory. The unit has a 1/8in gauge connection, allowing you to install a compatible pressure indicator reading in MPa/psi to match the default NPT thread.
T selects NPT port threads, the North American taper pipe standard. Without it the same order code has PT (Rc) ports, and with G it has G (BSPP) ports; body, function and dimensions do not change.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Most standard models are dispatched in 3-5 days.
Most inquiries answered within 7 hours.
Send us the quantity, thread type (PT / G / NPT) and destination. We confirm price, availability and lead time — usually within 7 hours.