
The AirTAC GAC F.R.L. Unit GAC30008LTK is a genuine three-unit F.R.L. combination — a filter, a pressure regulator and a lubricator pre-assembled on one bracket with quick mounting clamps. It has 1/4" ports, a 40 µm filter element and regulates 0.15 - 0.4 MPa (20 - 58 psi).
Delivering cleaned, lubricated air at a precisely set downstream pressure, this AirTAC unit combines a filter, regulator and lubricator on a single L-shape bracket. The 1/4in ported body operates in the lower pressure range of 0.15-0.4 MPa (20-58 psi) and uses a 40 um element. A circular gauge reading MPa/psi is fitted for the default NPT thread, allowing operators to monitor the setpoint directly.
Air passes through the filter, then the regulator, and finally the lubricator, ensuring oil mist is added downstream so the regulator seat never fouls. The 60 cc condensate bowl and 98 cc oil bowl dictate the maintenance rhythm, while the semi-auto and manual drain pair clears water on every pressure drop or on demand. This specific configuration includes a reverse-flow (reflux) valve, which the catalogue shows as a separate pneumatic symbol with details on its own page. Order code GAC30008LTK has NPT ports (the T in the code) for North American pipe fittings.
| Model | Airtac GAC F.R.L. Unit GAC30008LTK |
|---|---|
| Series | GAC300 F.R.L. combination |
| Port size | 1/4" (NPT thread) |
| Filtering grade | 40 µm |
| Pressure range | 0.15 - 0.4 MPa (20 - 58 psi) |
| Type | Lower pressure |
| Bowl material | PC |
| Drain type | Semi-auto drain + manual drain |
| Fluid | Air |
|---|---|
| Max. pressure | 1.0 MPa (145 psi) |
| Proof pressure | 1.5 MPa (215 psi) |
| Temperature range | -5 to +70 °C (unfreeze) |
| Capacity of drain bowl | 60 cc |
| Capacity of oil bowl | 98 cc |
| Recommended lubricant | ISO VG 32 or equivalent |
| Weight | 1300 g |
Specifications follow the official AirTAC GAC catalogue (pages 216-217). Air must not freeze in the unit. The fitted circular gauge reads in psi / bar, set by the NPT thread code.
| GAC300 | GA300 series F.R.L. unit — sets ports, bowl capacity and weight. |
|---|---|
| (blank) | Bowl material: PC. Available on this body: PC (blank), Metal (C), Nylon (N). |
| 08 | Port size 1/4". This body offers 08 = 1/4", 10 = 3/8", 15 = 1/2". |
| (blank) | Drain: Semi-auto drain + manual drain. |
| L | Lower pressure type — 0.15 - 0.4 MPa (20 - 58 psi). This body offers Standard (S) or Lower pressure (L). |
| (blank) | Circular pressure gauge fitted. |
| (blank) | Filtering grade 40 µm. |
| T | NPT thread; gauge scale psi / bar. |
| K | Reverse-flow (reflux) valve attached. |
Constituent units, orderable separately as spares: GAF300-08 filter, GAR300-08 regulator, GAL300-08 lubricator — all three share this body and port.
Figures are the end of the flow curve plotted in the AirTAC catalogue at 0.7 MPa inlet pressure — a sizing envelope for comparing bodies, not a rated flow. Read the catalogue curve for a real duty point. Outlet pressure falls as flow rises, so size a body with headroom above your peak demand.
| This model | GAC300 · 1/4" · curve to 3000 L/min |
|---|---|
| One size down | GAC200 |
| One size up | GAC400 (curve to 6000 L/min) |
| Build order | Filter → bracket → regulator → lubricator |
Feeds low-pressure air to sensitive laboratory grippers and test fixtures that require stable, finely tuned actuation below 0.4 MPa.
Conditions air for fabric-handling cylinders where lower pressure prevents material marking while the lubricator protects moving seals.
Supplies filtered and oiled air to small-bore pneumatic presses on electronic assembly lines, utilizing the 1/4in port for compact routing.
Choose this 1300 g assembly when a machine requires low-pressure regulation rather than the standard 0.15-0.9 MPa range. The PC bowl is standard for general environments, and the fitted gauge lets technicians read the exact outlet pressure in MPa/psi. If the downstream line must remain completely oil-free, omit the lubricator and select a filter-regulator instead. For maintenance, the three units are separately orderable as GAF300-08, GAR300-08 and GAL300-08, all sharing the exact same body and port suffix.
The 0.4 MPa ceiling is about 44% of the Standard type's 0.9 MPa upper limit, so verify your actuators never need more force than this lower range allows.
Quick checklist
The lubricator adds an oil mist downstream of the regulator. If any part of the line must stay oil-free, use a filter-regulator instead of an F.R.L. combination on that branch.
It operates at 0.15-0.4 MPa (20-58 psi) with a max pressure of 1.0 MPa (145 psi) and a proof pressure of 1.5 MPa (215 psi). The temperature range is -5 to 70 C. It has a 60 cc drain bowl, a 98 cc oil bowl, uses ISO VG 32 lubricant, and weighs 1300 g.
The K indicates a reverse-flow (reflux) valve is attached. The catalogue lists this as a separate pneumatic symbol with details on its own page, and it is included as an ordering difference on this specific unit.
T selects NPT port threads, the North American taper pipe standard. Without it the same order code has PT (Rc) ports, and with G it has G (BSPP) ports; body, function and dimensions do not change.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Most standard models are dispatched in 3-5 days.
Most inquiries answered within 7 hours.
Send us the quantity, thread type (PT / G / NPT) and destination. We confirm price, availability and lead time — usually within 7 hours.