verified AirTAC China Authorized Export Seller shield 100% Genuine AirTAC Parts workspace_premium 1-Year Warranty
appsShop by Modelexpand_more
person shopping_cart Request a QuoteQuote
AirTAC GAC300 · F.R.L. Combination (Filter + Regulator + Lubricator)

Airtac GAC F.R.L. Unit GAC30008LWT

The AirTAC GAC F.R.L. Unit GAC30008LWT is a genuine three-unit F.R.L. combination — a filter, a pressure regulator and a lubricator pre-assembled on one bracket with quick mounting clamps. It has 1/4" ports, a 5 µm filter element and regulates 0.15 - 0.4 MPa (20 - 58 psi).

  • TypeF.R.L. combination
  • Port size1/4"
  • Pressure range0.15 - 0.4 MPa (20 - 58 psi)
  • Filtering grade5 µm
  • Bowl materialPC
  • Drainsemi-auto + manual
  • Pressure gaugeCircular, psi / bar
  • Weight1300 g
$84.17 $91.67Save 8% Standard model — usually dispatched in 3-5 days
Request a Quote
  • No minimum order. A single piece can be ordered.
  • Shipped from our own warehouse: most standard models dispatch in 3–5 days; custom and non-standard models take 8–10 business days. Transit time after that depends on the destination.
Compare every GAC300-08 bowl, type and element option on one page All GAC300-08 codes →
verified Genuine AirTAC workspace_premium 1-year warranty bolt Reply in 7 h

About the Airtac GAC F.R.L. Unit GAC30008LWT

Delivering cleaned, regulated and lubricated air for downstream pneumatics, this GAC30008LWT assembly integrates a filter, regulator and lubricator on a single L-shape bracket. The 1/4in port pairs with a lower-pressure type operating range of 0.15-0.4 MPa (20-58 psi). A 5 um element captures fine particulates for sensitive valve circuits, while the NPT thread pairs with a fitted circular gauge reading MPa/psi.

Air flows through the filter first, then the regulator, and finally the lubricator, ensuring oil mist is added downstream so the regulator seat never fouls. The 1300 g mass requires a firm panel mount rather than tubing support. Condensate collects in a 60 cc bowl, and the semi-auto drain dumps liquid on every pressure drop alongside a manual override.

Airtac GAC F.R.L. Unit GAC30008LWT Technical Specifications

ModelAirtac GAC F.R.L. Unit GAC30008LWT
SeriesGAC300 F.R.L. combination
Port size1/4" (NPT thread)
Filtering grade5 µm
Pressure range0.15 - 0.4 MPa (20 - 58 psi)
TypeLower pressure
Bowl materialPC
Drain typeSemi-auto drain + manual drain
FluidAir
Max. pressure1.0 MPa (145 psi)
Proof pressure1.5 MPa (215 psi)
Temperature range-5 to +70 °C (unfreeze)
Capacity of drain bowl60 cc
Capacity of oil bowl98 cc
Recommended lubricantISO VG 32 or equivalent
Weight1300 g

Specifications follow the official AirTAC GAC catalogue (pages 216-217). Air must not freeze in the unit. The fitted circular gauge reads in psi / bar, set by the NPT thread code.

Model Code: Airtac GAC F.R.L. Unit GAC30008LWT

GAC300GA300 series F.R.L. unit — sets ports, bowl capacity and weight.
(blank)Bowl material: PC. Available on this body: PC (blank), Metal (C), Nylon (N).
08Port size 1/4". This body offers 08 = 1/4", 10 = 3/8", 15 = 1/2".
(blank)Drain: Semi-auto drain + manual drain.
LLower pressure type — 0.15 - 0.4 MPa (20 - 58 psi). This body offers Standard (S) or Lower pressure (L).
(blank)Circular pressure gauge fitted.
WFiltering grade 5 µm.
TNPT thread; gauge scale psi / bar.
(blank)No reverse-flow valve.

Constituent units, orderable separately as spares: GAF300-08 filter, GAR300-08 regulator, GAL300-08 lubricator — all three share this body and port.

Size Class & Flow Envelope

  • GAC2001/8"-1/4" · 1750 L/min
  • GAC3001/4"-1/2" · 3000 L/min
  • GAC4003/8"-1/2" · 6000 L/min
  • GAC5003/4" · 7000 L/min
  • GAC6003/4"-1" · 12000 L/min

Figures are the end of the flow curve plotted in the AirTAC catalogue at 0.7 MPa inlet pressure — a sizing envelope for comparing bodies, not a rated flow. Read the catalogue curve for a real duty point. Outlet pressure falls as flow rises, so size a body with headroom above your peak demand.

This modelGAC300 · 1/4" · curve to 3000 L/min
One size downGAC200
One size upGAC400 (curve to 6000 L/min)
Build orderFilter → bracket → regulator → lubricator

Where the Airtac GAC F.R.L. Unit GAC30008LWT Is Used

science

Laboratory Analytical Tools

Feeds low-pressure air to sensitive diagnostic instruments, relying on the 5 um element to prevent particulate contamination in delicate valves.

precision_manufacturing

Textile Spinning Frames

Supplies a steady 0.4 MPa to delicate tensioning cylinders where standard 0.9 MPa pressures would damage yarn guides or fragile fibers.

handyman

Pneumatic Pick-and-Place

Conditions air for small 1/4in actuated grippers handling electronics, adding a controlled oil mist to extend gripper jaw life.

Is the Airtac GAC F.R.L. Unit GAC30008LWT the Right Air-Prep Unit?

Choose this 1/4in unit when a machine demands precision filtration and low outlet pressures. The 5 um element traps far finer particles than the standard 40 um grade, making it ideal for instrument air or sensitive solenoid valves, though it requires more frequent element replacement. Because it is an L-type assembly, the outlet pressure tops out at 0.4 MPa; if the equipment might ever require more, this is the wrong part. The fitted gauge reads MPa/psi for the default NPT thread, letting operators verify the setpoint directly. If the downstream line must remain completely oil-free, omit the lubricator and choose a separate filter-regulator instead. For maintenance, the individual elements and bowls are separately orderable as GAF300-08, GAR300-08 and GAL300-08. Stepping up to the GAC400 body increases the plotted flow envelope from 3000 to 6000 L/min at 0.7 MPa inlet, doubling the sizing capacity. Keep in mind that the 0.4 MPa ceiling is 44% of the standard 0.9 MPa limit, sharply restricting available downstream force.

Quick checklist

  • ✓ Body size for your peak flow (1/4" here)
  • ✓ Standard 0.9 MPa or lower-pressure 0.4 MPa
  • ✓ Bowl material: PC (blank), Metal (C), Nylon (N)
  • ✓ Drain: semi-auto + manual, or automatic
  • ✓ Element 40 µm or 5 µm
  • ✓ Thread & gauge scale (PT / G / NPT)
Ask an Engineer

Installation & Maintenance Notes

  • check Install with the airflow arrow: filter first, lubricator last.
  • check Keep inlet pressure at or below 1.0 MPa (145 psi).
  • check Fill the oil bowl with ISO VG 32 or equivalent only.
  • check Drain condensate before the 60 cc bowl fills.
  • check Keep the unit above freezing (-5 to +70 °C, unfreeze).
  • check Support the 1300 g unit on its bracket, not on the tubing.

The lubricator adds an oil mist downstream of the regulator. If any part of the line must stay oil-free, use a filter-regulator instead of an F.R.L. combination on that branch.

Airtac GAC F.R.L. Unit GAC30008LWT FAQ

This lower-pressure unit regulates from 0.15-0.4 MPa (20-58 psi) with a maximum pressure of 1.0 MPa (145 psi) and a proof pressure of 1.5 MPa (215 psi). It operates from -5 to 70 C, weighs 1300 g, and features a 60 cc drain bowl with a 98 cc oil bowl. The recommended lubricant is ISO VG 32.

The 5 um element catches far finer particles than the standard 40 um grade, protecting precision valves and instrument air circuits from dust that would cause sticking. The semi-auto drain pairs a pressure-drop release with a manual override, clearing the 60 cc condensate bowl automatically during normal operation while allowing manual purging during maintenance.

T selects NPT port threads, the North American taper pipe standard. Without it the same order code has PT (Rc) ports, and with G it has G (BSPP) ports; body, function and dimensions do not change.

verified

Authorized Export Seller

Genuine AirTAC parts produced by AirTAC factory.

workspace_premium

1-Year Warranty

Covers non-human-caused product damage.

local_shipping

Fast Dispatch

Most standard models are dispatched in 3-5 days.

bolt

Fast Reply

Most inquiries answered within 7 hours.

Request a Quote for Airtac GAC F.R.L. Unit GAC30008LWT

Send us the quantity, thread type (PT / G / NPT) and destination. We confirm price, availability and lead time — usually within 7 hours.

Thank you. We received your request for GAC30008LWT and will confirm price, availability and lead time — usually within 7 hours.

For the fastest response, keep the complete model number above and include a clear photo of the product label. If photo upload is unavailable, email photos to [email protected] with your model number.