
The AirTAC GAC F.R.L. Unit GAC30008LWTK is a genuine three-unit F.R.L. combination — a filter, a pressure regulator and a lubricator pre-assembled on one bracket with quick mounting clamps. It has 1/4" ports, a 5 µm filter element and regulates 0.15 - 0.4 MPa (20 - 58 psi).
Delivering cleaned, regulated and lubricated air for pneumatic setups, this AirTAC GAC30008LWTK combines a filter, regulator and lubricator on a single L-shape bracket. The 1/4in port pairs with a 5 um element to trap fine particles before they reach sensitive valves. Because the lubricator sits last in the sequence, oil mist enters downstream of the regulator seat, preventing fouling of internal components.
Configured for low-pressure duties, the unit regulates between 0.15-0.4 MPa (20-58 psi) and includes a fitted circular gauge reading MPa/psi for the default NPT thread. The assembly carries a 1300 g mass and features a reverse-flow (reflux) valve, which the catalogue shows as a separate pneumatic symbol with details on its own page. Condensate is managed by a semi-auto and manual drain combination, while the 60 cc drain bowl and 98 cc oil bowl dictate the maintenance frequency.
| Model | Airtac GAC F.R.L. Unit GAC30008LWTK |
|---|---|
| Series | GAC300 F.R.L. combination |
| Port size | 1/4" (NPT thread) |
| Filtering grade | 5 µm |
| Pressure range | 0.15 - 0.4 MPa (20 - 58 psi) |
| Type | Lower pressure |
| Bowl material | PC |
| Drain type | Semi-auto drain + manual drain |
| Fluid | Air |
|---|---|
| Max. pressure | 1.0 MPa (145 psi) |
| Proof pressure | 1.5 MPa (215 psi) |
| Temperature range | -5 to +70 °C (unfreeze) |
| Capacity of drain bowl | 60 cc |
| Capacity of oil bowl | 98 cc |
| Recommended lubricant | ISO VG 32 or equivalent |
| Weight | 1300 g |
Specifications follow the official AirTAC GAC catalogue (pages 216-217). Air must not freeze in the unit. The fitted circular gauge reads in psi / bar, set by the NPT thread code.
| GAC300 | GA300 series F.R.L. unit — sets ports, bowl capacity and weight. |
|---|---|
| (blank) | Bowl material: PC. Available on this body: PC (blank), Metal (C), Nylon (N). |
| 08 | Port size 1/4". This body offers 08 = 1/4", 10 = 3/8", 15 = 1/2". |
| (blank) | Drain: Semi-auto drain + manual drain. |
| L | Lower pressure type — 0.15 - 0.4 MPa (20 - 58 psi). This body offers Standard (S) or Lower pressure (L). |
| (blank) | Circular pressure gauge fitted. |
| W | Filtering grade 5 µm. |
| T | NPT thread; gauge scale psi / bar. |
| K | Reverse-flow (reflux) valve attached. |
Constituent units, orderable separately as spares: GAF300-08 filter, GAR300-08 regulator, GAL300-08 lubricator — all three share this body and port.
Figures are the end of the flow curve plotted in the AirTAC catalogue at 0.7 MPa inlet pressure — a sizing envelope for comparing bodies, not a rated flow. Read the catalogue curve for a real duty point. Outlet pressure falls as flow rises, so size a body with headroom above your peak demand.
| This model | GAC300 · 1/4" · curve to 3000 L/min |
|---|---|
| One size down | GAC200 |
| One size up | GAC400 (curve to 6000 L/min) |
| Build order | Filter → bracket → regulator → lubricator |
Feeds sensitive solenoid valve arrays requiring 5 um filtration and a strict 0.4 MPa ceiling to prevent diaphragm rupture.
Conditions supply air for low-force analytical actuators where standard 0.9 MPa shop pressure would cause damage.
Lubricates and regulates air for light-duty pick-and-place cylinders on a 1/4in ported desktop assembly fixture.
Choose this configuration when a 1/4in line requires a strict 0.15-0.4 MPa (20-58 psi) ceiling, as the lower-pressure type prevents accidental over-pressurization of delicate actuators. The 5 um element offers finer filtration than the standard 40 um grade, trading off element service frequency for cleaner downstream air. A semi-auto drain dumps condensate on every pressure drop, whereas the manual option clears liquid on demand. If the machine requires air without oil mist, the lubricator must be omitted and a dedicated filter-regulator chosen instead. The three constituent units are separately orderable as GAF300-08, GAR300-08 and GAL300-08, meaning a clogged element does not require replacing the whole assembly. Stepping up to the GAC400 body increases the flow envelope from 3000 L/min to 6000 L/min at 0.7 MPa inlet, doubling the capacity, but the 0.4 MPa ceiling is 44% of the standard 0.9 MPa maximum, so confirm your machine will never need more pressure.
Quick checklist
The lubricator adds an oil mist downstream of the regulator. If any part of the line must stay oil-free, use a filter-regulator instead of an F.R.L. combination on that branch.
This lower-pressure F.R.L. combination operates at 0.15-0.4 MPa (20-58 psi) with a maximum pressure of 1.0 MPa (145 psi) and a proof pressure of 1.5 MPa (215 psi). It handles temperatures from -5 to 70 C, features a 60 cc drain bowl, a 98 cc oil bowl, uses ISO VG 32 lubricant, and weighs 1300 g.
The L denotes the lower-pressure type capped at 0.4 MPa, W specifies the 5 um fine filtration element, and K indicates a reverse-flow (reflux) valve is fitted, shown as a separate pneumatic symbol in the catalogue. The unit also includes a semi-auto and manual drain pair plus a fitted gauge.
T selects NPT port threads, the North American taper pipe standard. Without it the same order code has PT (Rc) ports, and with G it has G (BSPP) ports; body, function and dimensions do not change.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Most standard models are dispatched in 3-5 days.
Most inquiries answered within 7 hours.
Send us the quantity, thread type (PT / G / NPT) and destination. We confirm price, availability and lead time — usually within 7 hours.