
The AirTAC GAC F.R.L. Unit GAC30008SNTK is a genuine three-unit F.R.L. combination — a filter, a pressure regulator and a lubricator pre-assembled on one bracket with quick mounting clamps. It has 1/4" ports, a 40 µm filter element and regulates 0.15 - 0.9 MPa (20 - 130 psi).
Delivering cleaned, regulated and lubricated air for downstream pneumatics, this AirTAC GAC30008SNTK is a complete F.R.L. combination rather than a single function device. It pairs a 40 um filter, a pressure regulator and a lubricator on one L-shape bracket with quick mounting clamps, eliminating inter-unit tubing. The 1/4in port body carries a 60 cc condensate bowl and a 98 cc oil reservoir, weighing 1300 g total.
This specific SKU is configured with a standard pressure range of 0.15-0.9 MPa (20-130 psi) and omits the pressure gauge entirely. If you need to read the set pressure, you must add a gauge to the 1/8in connection. The sequence of flow ensures moisture and particulates are trapped before reaching the regulator, while the oil mist is introduced last so it never fouls the internal regulator seat. This version has NPT ports (the T in the order code) for North American pipe fittings.
| Model | Airtac GAC F.R.L. Unit GAC30008SNTK |
|---|---|
| Series | GAC300 F.R.L. combination |
| Port size | 1/4" (NPT thread) |
| Filtering grade | 40 µm |
| Pressure range | 0.15 - 0.9 MPa (20 - 130 psi) |
| Type | Standard |
| Bowl material | PC |
| Drain type | Semi-auto drain + manual drain |
| Fluid | Air |
|---|---|
| Max. pressure | 1.0 MPa (145 psi) |
| Proof pressure | 1.5 MPa (215 psi) |
| Temperature range | -5 to +70 °C (unfreeze) |
| Capacity of drain bowl | 60 cc |
| Capacity of oil bowl | 98 cc |
| Recommended lubricant | ISO VG 32 or equivalent |
| Weight | 1300 g |
Specifications follow the official AirTAC GAC catalogue (pages 216-217). Air must not freeze in the unit. No gauge is supplied with this model — the gauge connection on a GAC300 is 1/8" if you add one.
| GAC300 | GA300 series F.R.L. unit — sets ports, bowl capacity and weight. |
|---|---|
| (blank) | Bowl material: PC. Available on this body: PC (blank), Metal (C), Nylon (N). |
| 08 | Port size 1/4". This body offers 08 = 1/4", 10 = 3/8", 15 = 1/2". |
| (blank) | Drain: Semi-auto drain + manual drain. |
| S | Standard type — 0.15 - 0.9 MPa (20 - 130 psi). This body offers Standard (S) or Lower pressure (L). |
| N | No pressure gauge; 1/8" gauge connection. |
| (blank) | Filtering grade 40 µm. |
| T | NPT thread; gauge scale psi / bar. |
| K | Reverse-flow (reflux) valve attached. |
Constituent units, orderable separately as spares: GAF300-08 filter, GAR300-08 regulator, GAL300-08 lubricator — all three share this body and port.
Figures are the end of the flow curve plotted in the AirTAC catalogue at 0.7 MPa inlet pressure — a sizing envelope for comparing bodies, not a rated flow. Read the catalogue curve for a real duty point. Outlet pressure falls as flow rises, so size a body with headroom above your peak demand.
| This model | GAC300 · 1/4" · curve to 3000 L/min |
|---|---|
| One size down | GAC200 |
| One size up | GAC400 (curve to 6000 L/min) |
| Build order | Filter → bracket → regulator → lubricator |
Prepares air for automatic tool changers on machining centers, ensuring grippers receive steady pressure and light lubrication to prevent O-ring wear.
Conditions air for pneumatic pop-up diverters on packaging lines, supplying clean 1/4in flow to push products into secondary lanes smoothly.
Feeds handheld pneumatic nutrunners and screwdrivers at assembly workstations, adding necessary oil mist to keep air vane motors spinning freely.
Choose this mid-size 1/4in body when feeding a single actuator or a small pneumatic jig, stepping up from the GAC200 which only offers a 25 cc drain bowl. The PC bowl on this unit is rated for the standard 1.0 MPa maximum and -5 to 70 C temperature range, identical to the metal and nylon options. It ships with both a semi-auto and a manual drain fitted, meaning condensate dumps automatically on each pressure drop but can also be emptied on demand.
Because the N follows the port, no circular gauge is supplied, leaving operators unable to verify settings without adding one. The K in the code means a reverse-flow (reflux) valve is fitted, which the catalogue shows as a separate pneumatic symbol with details on its own page. If the downstream line must stay oil-free, choose a filter-regulator instead, as the lubricator here actively adds oil mist. For maintenance, order GAF300-08, GAR300-08 and GAL300-08. The 1.5 MPa proof pressure provides a 1.5x burst-test margin over the 1.0 MPa maximum, but this is not permission to run above 1.0 MPa.
Quick checklist
The lubricator adds an oil mist downstream of the regulator. If any part of the line must stay oil-free, use a filter-regulator instead of an F.R.L. combination on that branch.
This standard type unit regulates from 0.15-0.9 MPa (20-130 psi) with a maximum pressure of 1.0 MPa (145 psi) and a 1.5 MPa (215 psi) proof pressure. It operates in -5 to 70 C temperatures, uses a 40 um element, holds 60 cc of condensate and 98 cc of oil, weighs 1300 g, and requires ISO VG 32 lubricant.
The N after the port code indicates no gauge is supplied from the factory. The body features a 1/8in gauge connection, so you must install your own circular gauge reading MPa/psi to match the default NPT thread if you want to monitor the downstream setpoint.
T selects NPT port threads, the North American taper pipe standard. Without it the same order code has PT (Rc) ports, and with G it has G (BSPP) ports; body, function and dimensions do not change.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Most standard models are dispatched in 3-5 days.
Most inquiries answered within 7 hours.
Send us the quantity, thread type (PT / G / NPT) and destination. We confirm price, availability and lead time — usually within 7 hours.