
The AirTAC GAC F.R.L. Unit GAC30008SNWT is a genuine three-unit F.R.L. combination — a filter, a pressure regulator and a lubricator pre-assembled on one bracket with quick mounting clamps. It has 1/4" ports, a 5 µm filter element and regulates 0.15 - 0.9 MPa (20 - 130 psi).
Delivering cleaned, regulated and lubricated air for downstream pneumatics, this AirTAC unit combines a filter, regulator and lubricator on a single L-shape bracket. It features a 1/4in port, a standard pressure range of 0.15-0.9 MPa (20-130 psi) and a 5 um element. The quick mounting clamps eliminate inter-unit tubing, cutting installation time and potential leak paths. Air passes through the filter first, then the regulator, with oil mist added last so the regulator seat never fouls.
This specific configuration uses a PC bowl and omits the pressure gauge entirely. Without a gauge fitted, the set pressure cannot be read unless one is added later to the 1/8in gauge connection. The 5 um element traps far finer particles than the standard 40 um grade, suiting precision valves, though it requires more frequent element service. Condensate is managed by a semi-auto and manual drain pair, and the 60 cc drain bowl sets the maintenance interval. Order code GAC30008SNWT has NPT ports (the T in the code) for North American pipe fittings.
| Model | Airtac GAC F.R.L. Unit GAC30008SNWT |
|---|---|
| Series | GAC300 F.R.L. combination |
| Port size | 1/4" (NPT thread) |
| Filtering grade | 5 µm |
| Pressure range | 0.15 - 0.9 MPa (20 - 130 psi) |
| Type | Standard |
| Bowl material | PC |
| Drain type | Semi-auto drain + manual drain |
| Fluid | Air |
|---|---|
| Max. pressure | 1.0 MPa (145 psi) |
| Proof pressure | 1.5 MPa (215 psi) |
| Temperature range | -5 to +70 °C (unfreeze) |
| Capacity of drain bowl | 60 cc |
| Capacity of oil bowl | 98 cc |
| Recommended lubricant | ISO VG 32 or equivalent |
| Weight | 1300 g |
Specifications follow the official AirTAC GAC catalogue (pages 216-217). Air must not freeze in the unit. No gauge is supplied with this model — the gauge connection on a GAC300 is 1/8" if you add one.
| GAC300 | GA300 series F.R.L. unit — sets ports, bowl capacity and weight. |
|---|---|
| (blank) | Bowl material: PC. Available on this body: PC (blank), Metal (C), Nylon (N). |
| 08 | Port size 1/4". This body offers 08 = 1/4", 10 = 3/8", 15 = 1/2". |
| (blank) | Drain: Semi-auto drain + manual drain. |
| S | Standard type — 0.15 - 0.9 MPa (20 - 130 psi). This body offers Standard (S) or Lower pressure (L). |
| N | No pressure gauge; 1/8" gauge connection. |
| W | Filtering grade 5 µm. |
| T | NPT thread; gauge scale psi / bar. |
| (blank) | No reverse-flow valve. |
Constituent units, orderable separately as spares: GAF300-08 filter, GAR300-08 regulator, GAL300-08 lubricator — all three share this body and port.
Figures are the end of the flow curve plotted in the AirTAC catalogue at 0.7 MPa inlet pressure — a sizing envelope for comparing bodies, not a rated flow. Read the catalogue curve for a real duty point. Outlet pressure falls as flow rises, so size a body with headroom above your peak demand.
| This model | GAC300 · 1/4" · curve to 3000 L/min |
|---|---|
| One size down | GAC200 |
| One size up | GAC400 (curve to 6000 L/min) |
| Build order | Filter → bracket → regulator → lubricator |
Feeds sensitive directional control valves on a machining center where the 5 um element prevents spool binding from fine particulates.
Conditions air for high-speed pneumatic pickers, ensuring the lubricator provides a steady oil mist to extend gripper seal life.
Prepares supply air for analytical instrument actuators, relying on the 0.15-0.9 MPa range to hold a stable setpoint for delicate probing.
Choose this GAC300 body for mid-range duties where a 5 um element is required to protect sensitive instrumentation. The 60 cc drain bowl and 98 cc oil bowl provide a reasonable service interval for a machine attended daily. If your line must stay completely oil-free, omit the lubricator and choose a filter-regulator instead. The three constituent units are separately orderable as GAF300-08, GAR300-08 and GAL300-08, so a clogged element does not require replacing the whole assembly. The catalogue flow curve for the GAC300 is plotted to 3000 L/min at 0.7 MPa inlet, which is double the 1750 L/min envelope of the smaller GAC200, helping you size up or down. Because the maximum supply is 1.0 MPa and the standard type regulates to 0.9 MPa, there is only about 0.1 MPa of headroom above the top setting, so plan a supply near 1.0 MPa if you truly need 0.9 MPa out.
Quick checklist
The lubricator adds an oil mist downstream of the regulator. If any part of the line must stay oil-free, use a filter-regulator instead of an F.R.L. combination on that branch.
This unit operates at 0.15-0.9 MPa (20-130 psi) with a maximum pressure of 1.0 MPa (145 psi) and a proof pressure of 1.5 MPa (215 psi). It has a 1/4in port, a 5 um element, a 60 cc drain bowl, a 98 cc oil bowl, and weighs 1300 g. The temperature range is -5 to 70 C, and the recommended lubricant is ISO VG 32.
The N in the product code indicates no gauge is supplied. You can install your own gauge using the 1/8in gauge connection on the body, which allows you to select a specific NPT thread scale reading in MPa and psi to match your operators' preferences.
T selects NPT port threads, the North American taper pipe standard. Without it the same order code has PT (Rc) ports, and with G it has G (BSPP) ports; body, function and dimensions do not change.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Most standard models are dispatched in 3-5 days.
Most inquiries answered within 7 hours.
Send us the quantity, thread type (PT / G / NPT) and destination. We confirm price, availability and lead time — usually within 7 hours.