
The AirTAC GAC F.R.L. Unit GAC30008SWT is a genuine three-unit F.R.L. combination — a filter, a pressure regulator and a lubricator pre-assembled on one bracket with quick mounting clamps. It has 1/4" ports, a 5 µm filter element and regulates 0.15 - 0.9 MPa (20 - 130 psi).
Delivering cleaned, regulated and lubricated air, the GAC30008SWT pre-assembles a filter, regulator and lubricator on a single L-shape bracket with quick mounting clamps. This standard type handles 0.15-0.9 MPa (20-130 psi) at a 1/4in port, using a 5 um element to trap fine particles before they reach precision valves. A circular gauge is fitted, reading MPa/psi for the default NPT thread.
Air passes through the filter first, then the regulator, with oil mist added last so the oil never fouls the regulator seat. The 1300 g assembly carries a 60 cc condensate bowl and a 98 cc oil reservoir. If the downstream line must stay oil-free, omit the lubricator and choose a separate filter-regulator instead.
| Model | Airtac GAC F.R.L. Unit GAC30008SWT |
|---|---|
| Series | GAC300 F.R.L. combination |
| Port size | 1/4" (NPT thread) |
| Filtering grade | 5 µm |
| Pressure range | 0.15 - 0.9 MPa (20 - 130 psi) |
| Type | Standard |
| Bowl material | PC |
| Drain type | Semi-auto drain + manual drain |
| Fluid | Air |
|---|---|
| Max. pressure | 1.0 MPa (145 psi) |
| Proof pressure | 1.5 MPa (215 psi) |
| Temperature range | -5 to +70 °C (unfreeze) |
| Capacity of drain bowl | 60 cc |
| Capacity of oil bowl | 98 cc |
| Recommended lubricant | ISO VG 32 or equivalent |
| Weight | 1300 g |
Specifications follow the official AirTAC GAC catalogue (pages 216-217). Air must not freeze in the unit. The fitted circular gauge reads in psi / bar, set by the NPT thread code.
| GAC300 | GA300 series F.R.L. unit — sets ports, bowl capacity and weight. |
|---|---|
| (blank) | Bowl material: PC. Available on this body: PC (blank), Metal (C), Nylon (N). |
| 08 | Port size 1/4". This body offers 08 = 1/4", 10 = 3/8", 15 = 1/2". |
| (blank) | Drain: Semi-auto drain + manual drain. |
| S | Standard type — 0.15 - 0.9 MPa (20 - 130 psi). This body offers Standard (S) or Lower pressure (L). |
| (blank) | Circular pressure gauge fitted. |
| W | Filtering grade 5 µm. |
| T | NPT thread; gauge scale psi / bar. |
| (blank) | No reverse-flow valve. |
Constituent units, orderable separately as spares: GAF300-08 filter, GAR300-08 regulator, GAL300-08 lubricator — all three share this body and port.
Figures are the end of the flow curve plotted in the AirTAC catalogue at 0.7 MPa inlet pressure — a sizing envelope for comparing bodies, not a rated flow. Read the catalogue curve for a real duty point. Outlet pressure falls as flow rises, so size a body with headroom above your peak demand.
| This model | GAC300 · 1/4" · curve to 3000 L/min |
|---|---|
| One size down | GAC200 |
| One size up | GAC400 (curve to 6000 L/min) |
| Build order | Filter → bracket → regulator → lubricator |
Feeds clean, oil-misted air to precision tool changer cylinders, protecting tight clearances from fine particulate ingress.
Conditions supply for high-speed pneumatic cutting jaws, ensuring consistent stroke pressure and lubrication for moving slides.
Prepares instrument air for sensitive pneumatic logic and sample handling components that require a 5 um particle barrier.
This 1/4in unit uses a PC bowl and ships with both a semi-auto and a manual drain, giving operators a choice between dumping condensate on every pressure drop or on demand. The 5 um element catches far finer grit than the standard 40 um grade, making it ideal for instrument air, though it requires more frequent element service. The three units are separately orderable as GAF300-08, GAR300-08 and GAL300-08, so a clogged screen does not mean replacing the whole bracket. Stepping up to the GAC400 body roughly doubles the plotted flow envelope to 6000 L/min at 0.7 MPa inlet compared to this body's 3000 L/min curve. Because the max supply is 1.0 MPa and the Standard type regulates to 0.9 MPa, there is only about 0.1 MPa of headroom above the top setting.
Quick checklist
The lubricator adds an oil mist downstream of the regulator. If any part of the line must stay oil-free, use a filter-regulator instead of an F.R.L. combination on that branch.
This standard type operates at 0.15-0.9 MPa (20-130 psi) with a max pressure of 1.0 MPa (145 psi) and a proof pressure of 1.5 MPa (215 psi). It runs from -5 to 70 C, weighs 1300 g, and pairs a 60 cc drain bowl with a 98 cc oil bowl. The recommended lubricant is ISO VG 32.
The W code specifies a 5 um element instead of the standard 40 um grade. It traps far finer particles, protecting precision valves and instrument air circuits, at the cost of more frequent element service.
T selects NPT port threads, the North American taper pipe standard. Without it the same order code has PT (Rc) ports, and with G it has G (BSPP) ports; body, function and dimensions do not change.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Most standard models are dispatched in 3-5 days.
Most inquiries answered within 7 hours.
Send us the quantity, thread type (PT / G / NPT) and destination. We confirm price, availability and lead time — usually within 7 hours.