
The AirTAC GAC F.R.L. Unit GAC30008SWTK is a genuine three-unit F.R.L. combination — a filter, a pressure regulator and a lubricator pre-assembled on one bracket with quick mounting clamps. It has 1/4" ports, a 5 µm filter element and regulates 0.15 - 0.9 MPa (20 - 130 psi).
Delivering cleaned, regulated and lubricated air for downstream pneumatics, this AirTAC GAC30008SWTK combines a filter, regulator and lubricator on a single L-shape bracket. The 1/4in port pairs with a standard pressure range of 0.15-0.9 MPa (20-130 psi) and a 5 um element to trap fine particulates before they reach sensitive valves. A circular gauge is fitted, reading MPa/psi for the default NPT thread.
The build routes air through the filter first, then the regulator, and finally the lubricator so oil mist is added downstream of the regulator seat. Condensate is managed by a semi-auto and manual drain pair, while the 60 cc drain bowl and 98 cc oil bowl set the maintenance interval. This 1300 g assembly includes a reverse-flow (reflux) valve, shown as a separate pneumatic symbol in the catalogue.
| Model | Airtac GAC F.R.L. Unit GAC30008SWTK |
|---|---|
| Series | GAC300 F.R.L. combination |
| Port size | 1/4" (NPT thread) |
| Filtering grade | 5 µm |
| Pressure range | 0.15 - 0.9 MPa (20 - 130 psi) |
| Type | Standard |
| Bowl material | PC |
| Drain type | Semi-auto drain + manual drain |
| Fluid | Air |
|---|---|
| Max. pressure | 1.0 MPa (145 psi) |
| Proof pressure | 1.5 MPa (215 psi) |
| Temperature range | -5 to +70 °C (unfreeze) |
| Capacity of drain bowl | 60 cc |
| Capacity of oil bowl | 98 cc |
| Recommended lubricant | ISO VG 32 or equivalent |
| Weight | 1300 g |
Specifications follow the official AirTAC GAC catalogue (pages 216-217). Air must not freeze in the unit. The fitted circular gauge reads in psi / bar, set by the NPT thread code.
| GAC300 | GA300 series F.R.L. unit — sets ports, bowl capacity and weight. |
|---|---|
| (blank) | Bowl material: PC. Available on this body: PC (blank), Metal (C), Nylon (N). |
| 08 | Port size 1/4". This body offers 08 = 1/4", 10 = 3/8", 15 = 1/2". |
| (blank) | Drain: Semi-auto drain + manual drain. |
| S | Standard type — 0.15 - 0.9 MPa (20 - 130 psi). This body offers Standard (S) or Lower pressure (L). |
| (blank) | Circular pressure gauge fitted. |
| W | Filtering grade 5 µm. |
| T | NPT thread; gauge scale psi / bar. |
| K | Reverse-flow (reflux) valve attached. |
Constituent units, orderable separately as spares: GAF300-08 filter, GAR300-08 regulator, GAL300-08 lubricator — all three share this body and port.
Figures are the end of the flow curve plotted in the AirTAC catalogue at 0.7 MPa inlet pressure — a sizing envelope for comparing bodies, not a rated flow. Read the catalogue curve for a real duty point. Outlet pressure falls as flow rises, so size a body with headroom above your peak demand.
| This model | GAC300 · 1/4" · curve to 3000 L/min |
|---|---|
| One size down | GAC200 |
| One size up | GAC400 (curve to 6000 L/min) |
| Build order | Filter → bracket → regulator → lubricator |
Feeds instrument-quality air to small-bore directional valves using the 5 um element to prevent sticking in tight internal tolerances.
Supplies a steady 1/4in air flow with downstream oil mist to keep high-speed folding cylinders moving without interruption.
Conditions supply air for compact pneumatic grippers and test fixtures where space and precise pressure control are critical.
Choose this 1/4in port body when a 5 um element is required for precision pneumatic circuits, noting that the finer mesh demands more frequent element service than the standard 40 um grade. The PC bowl suits general industrial environments within the -5 to 70 C range, and the fitted semi-auto and manual drain pair clears condensate on each pressure drop or on demand. If the downstream line must stay oil-free, omit the lubricator and choose a filter-regulator instead. Spares follow the body-port suffix exactly: GAF300-08, GAR300-08 and GAL300-08. Stepping up to the GAC400 body shifts the flow envelope from 3000 L/min to 6000 L/min at 0.7 MPa inlet, doubling the sizing capacity. Because the maximum supply is 1.0 MPa and the Standard type regulates to 0.9 MPa, there is only about 0.1 MPa of headroom above the top setting.
Quick checklist
The lubricator adds an oil mist downstream of the regulator. If any part of the line must stay oil-free, use a filter-regulator instead of an F.R.L. combination on that branch.
This standard type unit operates at 0.15-0.9 MPa (20-130 psi) with a maximum pressure of 1.0 MPa (145 psi) and a proof pressure of 1.5 MPa (215 psi). It has a 1/4in port, a 5 um element, a 60 cc drain bowl, a 98 cc oil bowl, and weighs 1300 g. The operating temperature is -5 to 70 C, and the recommended lubricant is ISO VG 32.
The K indicates that a reverse-flow (reflux) valve is fitted to this assembly. The catalogue shows this component as a separate pneumatic symbol with details on its own page.
T selects NPT port threads, the North American taper pipe standard. Without it the same order code has PT (Rc) ports, and with G it has G (BSPP) ports; body, function and dimensions do not change.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Most standard models are dispatched in 3-5 days.
Most inquiries answered within 7 hours.
Send us the quantity, thread type (PT / G / NPT) and destination. We confirm price, availability and lead time — usually within 7 hours.