
The AirTAC GAC F.R.L. Unit GAC300C08ALNWTK is a genuine three-unit F.R.L. combination — a filter, a pressure regulator and a lubricator pre-assembled on one bracket with quick mounting clamps. It has 1/4" ports, a 5 µm filter element and regulates 0.15 - 0.4 MPa (20 - 58 psi).
Delivering cleaned, regulated and lubricated air for downstream pneumatics, this GAC300C08ALNWTK assembly integrates a filter, regulator and lubricator on a single L-shape bracket. The 1/4in port pairs with a 5 um element to capture fine particulates before air enters the system. Because the lubricator sits last in the sequence, oil mist is introduced downstream of the regulator seat, preventing fouling of internal components.
This specific configuration uses a robust metal bowl and an automatic drain that clears condensate without operator intervention. Operating at 0.15-0.4 MPa (20-58 psi), it lacks a factory gauge but provides a 1/8in gauge connection for custom instrumentation. A reverse-flow valve is fitted, which the catalogue illustrates as a separate pneumatic symbol on its own page. This version has NPT ports (the T in the order code) for North American pipe fittings.
| Model | Airtac GAC F.R.L. Unit GAC300C08ALNWTK |
|---|---|
| Series | GAC300 F.R.L. combination |
| Port size | 1/4" (NPT thread) |
| Filtering grade | 5 µm |
| Pressure range | 0.15 - 0.4 MPa (20 - 58 psi) |
| Type | Lower pressure |
| Bowl material | Metal |
| Drain type | Automatic drain |
| Fluid | Air |
|---|---|
| Max. pressure | 1.0 MPa (145 psi) |
| Proof pressure | 1.5 MPa (215 psi) |
| Temperature range | -5 to +70 °C (unfreeze) |
| Capacity of drain bowl | 60 cc |
| Capacity of oil bowl | 98 cc |
| Recommended lubricant | ISO VG 32 or equivalent |
| Weight | 1300 g |
Specifications follow the official AirTAC GAC catalogue (pages 216-217). Air must not freeze in the unit. No gauge is supplied with this model — the gauge connection on a GAC300 is 1/8" if you add one.
| GAC300 | GA300 series F.R.L. unit — sets ports, bowl capacity and weight. |
|---|---|
| C | Bowl material: Metal. Available on this body: PC (blank), Metal (C), Nylon (N). |
| 08 | Port size 1/4". This body offers 08 = 1/4", 10 = 3/8", 15 = 1/2". |
| A | Drain: Automatic drain. |
| L | Lower pressure type — 0.15 - 0.4 MPa (20 - 58 psi). This body offers Standard (S) or Lower pressure (L). |
| N | No pressure gauge; 1/8" gauge connection. |
| W | Filtering grade 5 µm. |
| T | NPT thread; gauge scale psi / bar. |
| K | Reverse-flow (reflux) valve attached. |
Constituent units, orderable separately as spares: GAF300-08 filter, GAR300-08 regulator, GAL300-08 lubricator — all three share this body and port.
Figures are the end of the flow curve plotted in the AirTAC catalogue at 0.7 MPa inlet pressure — a sizing envelope for comparing bodies, not a rated flow. Read the catalogue curve for a real duty point. Outlet pressure falls as flow rises, so size a body with headroom above your peak demand.
| This model | GAC300 · 1/4" · curve to 3000 L/min |
|---|---|
| One size down | GAC200 |
| One size up | GAC400 (curve to 6000 L/min) |
| Build order | Filter → bracket → regulator → lubricator |
Feeds sensitive solenoid valves requiring low-pressure 0.4 MPa input and fine 5 um filtration to prevent spool sticking.
Conditions supply air for delicate test fixtures where the 1/4in port and lower pressure range prevent damage to sensitive components.
Provides steady low-pressure air and downstream oil mist for small moving grippers, utilizing the automatic drain during continuous shifts.
Choose this 1300 g unit when a low-pressure circuit demands fine 5 um filtration and hands-free condensate management. The metal bowl suits harsher industrial settings, while the automatic drain leverages the 60 cc condensate capacity to reduce maintenance interventions. If your downstream process requires strictly oil-free air, you must omit the lubricator stage and select a dedicated filter-regulator instead. For maintenance, the individual components are separately orderable as GAF300-08, GAR300-08 and GAL300-08. Keep in mind the 0.15-0.4 MPa operating ceiling is 44% of the standard 0.9 MPa maximum, making it strictly unsuitable for high-pressure actuators.
Quick checklist
The lubricator adds an oil mist downstream of the regulator. If any part of the line must stay oil-free, use a filter-regulator instead of an F.R.L. combination on that branch.
This model operates at 0.15-0.4 MPa (20-58 psi) with a maximum pressure of 1.0 MPa (145 psi) and a proof pressure of 1.5 MPa (215 psi). It functions in temperatures from -5 to 70 C, uses a 5 um element, and weighs 1300 g. The drain bowl holds 60 cc and the oil bowl holds 98 cc, requiring ISO VG 32 lubricant.
No gauge is supplied with this model. However, the body features a 1/8in gauge connection, allowing you to install a separate instrument to monitor the 0.15-0.4 MPa range. The default NPT thread scale for compatible gauges is MPa/psi.
T selects NPT port threads, the North American taper pipe standard. Without it the same order code has PT (Rc) ports, and with G it has G (BSPP) ports; body, function and dimensions do not change.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Most standard models are dispatched in 3-5 days.
Most inquiries answered within 7 hours.
Send us the quantity, thread type (PT / G / NPT) and destination. We confirm price, availability and lead time — usually within 7 hours.