
The AirTAC GAC F.R.L. Unit GAC300C08ALTK is a genuine three-unit F.R.L. combination — a filter, a pressure regulator and a lubricator pre-assembled on one bracket with quick mounting clamps. It has 1/4" ports, a 40 µm filter element and regulates 0.15 - 0.4 MPa (20 - 58 psi).
Delivering cleaned, regulated and lubricated air for pneumatic systems, the AirTAC GAC300C08ALTK is a complete F.R.L. combination pairing a filter, regulator and lubricator on a single L-shape bracket. This specific unit features a 1/4in port and a metal bowl, operating within the lower pressure range of 0.15-0.4 MPa (20-58 psi). It uses a standard 40 um element to capture solid grain and moisture before it reaches downstream equipment.
The internal build sequence routes air through the filter first, then the regulator, and finally the lubricator, ensuring oil mist is added downstream so the regulator seat never gets fouled. Because this model carries the automatic drain option, condensate is expelled from the 60 cc bowl without an operator present. A circular gauge is fitted to read the set pressure in MPa/psi, and the assembly includes a reverse-flow valve, which the catalogue shows as a separate pneumatic symbol. This version has NPT ports (the T in the order code) for North American pipe fittings.
| Model | Airtac GAC F.R.L. Unit GAC300C08ALTK |
|---|---|
| Series | GAC300 F.R.L. combination |
| Port size | 1/4" (NPT thread) |
| Filtering grade | 40 µm |
| Pressure range | 0.15 - 0.4 MPa (20 - 58 psi) |
| Type | Lower pressure |
| Bowl material | Metal |
| Drain type | Automatic drain |
| Fluid | Air |
|---|---|
| Max. pressure | 1.0 MPa (145 psi) |
| Proof pressure | 1.5 MPa (215 psi) |
| Temperature range | -5 to +70 °C (unfreeze) |
| Capacity of drain bowl | 60 cc |
| Capacity of oil bowl | 98 cc |
| Recommended lubricant | ISO VG 32 or equivalent |
| Weight | 1300 g |
Specifications follow the official AirTAC GAC catalogue (pages 216-217). Air must not freeze in the unit. The fitted circular gauge reads in psi / bar, set by the NPT thread code.
| GAC300 | GA300 series F.R.L. unit — sets ports, bowl capacity and weight. |
|---|---|
| C | Bowl material: Metal. Available on this body: PC (blank), Metal (C), Nylon (N). |
| 08 | Port size 1/4". This body offers 08 = 1/4", 10 = 3/8", 15 = 1/2". |
| A | Drain: Automatic drain. |
| L | Lower pressure type — 0.15 - 0.4 MPa (20 - 58 psi). This body offers Standard (S) or Lower pressure (L). |
| (blank) | Circular pressure gauge fitted. |
| (blank) | Filtering grade 40 µm. |
| T | NPT thread; gauge scale psi / bar. |
| K | Reverse-flow (reflux) valve attached. |
Constituent units, orderable separately as spares: GAF300-08 filter, GAR300-08 regulator, GAL300-08 lubricator — all three share this body and port.
Figures are the end of the flow curve plotted in the AirTAC catalogue at 0.7 MPa inlet pressure — a sizing envelope for comparing bodies, not a rated flow. Read the catalogue curve for a real duty point. Outlet pressure falls as flow rises, so size a body with headroom above your peak demand.
| This model | GAC300 · 1/4" · curve to 3000 L/min |
|---|---|
| One size down | GAC200 |
| One size up | GAC400 (curve to 6000 L/min) |
| Build order | Filter → bracket → regulator → lubricator |
Feeds light-touch pneumatic grippers and small-bore cylinders on electronics assembly lines where actuation forces must stay strictly under 0.4 MPa.
Conditions air for delicate vacuum pick-and-place heads in packaging machinery, preventing particulate ingress while providing steady low-pressure oil mist.
Supplies clean, regulated air to low-pressure pneumatic slides and valves used in analytical lab instruments, benefiting from the unattended automatic drain.
Choose this 1300 g GAC300 body for mid-scale duties where the flow curve is plotted to 3000 L/min at 0.7 MPa inlet, stepping up from the 1750 L/min envelope of the smaller GAC200. The metal bowl offers a robust housing for industrial environments, while the lower pressure type caps output at 0.4 MPa. If the machine might ever require higher pressure, this L-type is the wrong choice. Note that oil mist is added downstream, so choose a filter-regulator instead if the line must remain oil-free. Should a component fail, the assembly splits into GAF300-08, GAR300-08 and GAL300-08 spares. Keep in mind the 0.4 MPa ceiling is 44% of the standard 0.9 MPa limit.
Quick checklist
The lubricator adds an oil mist downstream of the regulator. If any part of the line must stay oil-free, use a filter-regulator instead of an F.R.L. combination on that branch.
This lower-pressure unit regulates from 0.15-0.4 MPa (20-58 psi) with a max pressure of 1.0 MPa (145 psi) and a proof pressure of 1.5 MPa (215 psi). It operates from -5 to 70 C, weighs 1300 g, and features a 60 cc drain bowl with a 98 cc oil bowl. The recommended lubricant is ISO VG 32.
The K signifies that a reverse-flow (reflux) valve is attached to this F.R.L. unit. The official catalogue depicts this as a distinct pneumatic symbol with full details provided on its own dedicated page.
T selects NPT port threads, the North American taper pipe standard. Without it the same order code has PT (Rc) ports, and with G it has G (BSPP) ports; body, function and dimensions do not change.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Most standard models are dispatched in 3-5 days.
Most inquiries answered within 7 hours.
Send us the quantity, thread type (PT / G / NPT) and destination. We confirm price, availability and lead time — usually within 7 hours.