
The AirTAC GAC F.R.L. Unit GAC300C08AST is a genuine three-unit F.R.L. combination — a filter, a pressure regulator and a lubricator pre-assembled on one bracket with quick mounting clamps. It has 1/4" ports, a 40 µm filter element and regulates 0.15 - 0.9 MPa (20 - 130 psi).
Delivering cleaned, regulated and lubricated air for downstream pneumatics, this AirTAC unit combines a filter, regulator and lubricator on a single L-shape bracket. The 1/4in port pairs with a 40 um element and a standard pressure range of 0.15-0.9 MPa (20-130 psi). Because the lubricator sits last in the sequence, oil mist is introduced downstream of the regulator seat, preventing fouling during adjustment.
This variant uses a robust metal bowl and an automatic drain that clears condensate without operator intervention, making it well suited to wet lines. A circular gauge is fitted, reading MPa/psi for the default NPT thread. The 60 cc drain bowl and 98 cc oil reservoir dictate the service frequency, while the assembly weighs 1300 g and needs a firm panel mount rather than tubing support. Order code GAC300C08AST has NPT ports (the T in the code) for North American pipe fittings.
| Model | Airtac GAC F.R.L. Unit GAC300C08AST |
|---|---|
| Series | GAC300 F.R.L. combination |
| Port size | 1/4" (NPT thread) |
| Filtering grade | 40 µm |
| Pressure range | 0.15 - 0.9 MPa (20 - 130 psi) |
| Type | Standard |
| Bowl material | Metal |
| Drain type | Automatic drain |
| Fluid | Air |
|---|---|
| Max. pressure | 1.0 MPa (145 psi) |
| Proof pressure | 1.5 MPa (215 psi) |
| Temperature range | -5 to +70 °C (unfreeze) |
| Capacity of drain bowl | 60 cc |
| Capacity of oil bowl | 98 cc |
| Recommended lubricant | ISO VG 32 or equivalent |
| Weight | 1300 g |
Specifications follow the official AirTAC GAC catalogue (pages 216-217). Air must not freeze in the unit. The fitted circular gauge reads in psi / bar, set by the NPT thread code.
| GAC300 | GA300 series F.R.L. unit — sets ports, bowl capacity and weight. |
|---|---|
| C | Bowl material: Metal. Available on this body: PC (blank), Metal (C), Nylon (N). |
| 08 | Port size 1/4". This body offers 08 = 1/4", 10 = 3/8", 15 = 1/2". |
| A | Drain: Automatic drain. |
| S | Standard type — 0.15 - 0.9 MPa (20 - 130 psi). This body offers Standard (S) or Lower pressure (L). |
| (blank) | Circular pressure gauge fitted. |
| (blank) | Filtering grade 40 µm. |
| T | NPT thread; gauge scale psi / bar. |
| (blank) | No reverse-flow valve. |
Constituent units, orderable separately as spares: GAF300-08 filter, GAR300-08 regulator, GAL300-08 lubricator — all three share this body and port.
Figures are the end of the flow curve plotted in the AirTAC catalogue at 0.7 MPa inlet pressure — a sizing envelope for comparing bodies, not a rated flow. Read the catalogue curve for a real duty point. Outlet pressure falls as flow rises, so size a body with headroom above your peak demand.
| This model | GAC300 · 1/4" · curve to 3000 L/min |
|---|---|
| One size down | GAC200 |
| One size up | GAC400 (curve to 6000 L/min) |
| Build order | Filter → bracket → regulator → lubricator |
Feeds clean, oiled air at a stable pressure to pneumatic tool changers and clamping fixtures on mid-sized machining centres.
Regulates air for the sealing jaws and cutting cylinders on continuous motion packaging lines, ensuring consistent film cuts.
Supplies the necessary lubricated air for pop-up sorter cylinders and diverters operating along material handling conveyors.
Choose this GAC300 size class when a GAC200 lacks the required condensate capacity, as the 60 cc drain bowl here holds over twice the 25 cc capacity of the smaller body. The metal bowl suits harsher industrial settings compared to the standard PC or optional nylon, though buyers should confirm chemical compatibility for aggressive solvents. The automatic drain eliminates manual emptying routines, and the fitted gauge lets operators verify the set pressure at a glance. If your line must stay oil-free, omit the lubricator and choose a filter-regulator instead. For maintenance, the individual components are separately orderable as GAF300-08, GAR300-08 and GAL300-08. Stepping up to the GAC400 roughly doubles the plotted flow envelope from 3000 to 6000 L/min at 0.7 MPa inlet, but the GAC300 offers a lighter 1300 g footprint. Keep in mind that the 1.0 MPa maximum supply leaves only about 0.1 MPa of headroom above the 0.9 MPa standard setting, so plan your inlet pressure accordingly if you need maximum output.
Quick checklist
The lubricator adds an oil mist downstream of the regulator. If any part of the line must stay oil-free, use a filter-regulator instead of an F.R.L. combination on that branch.
This standard type operates at 0.15-0.9 MPa (20-130 psi) with a maximum pressure of 1.0 MPa (145 psi) and a proof pressure of 1.5 MPa (215 psi). The temperature range is -5 to 70 C. It features a 60 cc drain bowl, a 98 cc oil bowl, a 40 um element, and weighs 1300 g. The recommended lubricant is ISO VG 32.
The automatic drain clears accumulated condensate on every pressure cycle without needing an operator, which is ideal for unattended or high-moisture environments. The metal bowl provides a durable housing option for the 60 cc condensate capacity, offering a different build choice compared to the standard PC or nylon bowls while maintaining the same 1.0 MPa pressure rating.
T selects NPT port threads, the North American taper pipe standard. Without it the same order code has PT (Rc) ports, and with G it has G (BSPP) ports; body, function and dimensions do not change.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Most standard models are dispatched in 3-5 days.
Most inquiries answered within 7 hours.
Send us the quantity, thread type (PT / G / NPT) and destination. We confirm price, availability and lead time — usually within 7 hours.