
The AirTAC GAC F.R.L. Unit GAC300C08ASWTK is a genuine three-unit F.R.L. combination — a filter, a pressure regulator and a lubricator pre-assembled on one bracket with quick mounting clamps. It has 1/4" ports, a 5 µm filter element and regulates 0.15 - 0.9 MPa (20 - 130 psi).
This GAC300C08ASWTK is a three-unit F.R.L. combination - filter, regulator and lubricator - pre-assembled on one L-shape bracket with quick mounting clamps, so there is no inter-unit tubing to leak. Air passes through the filter first, then the regulator, and the lubricator adds oil mist last, downstream of the regulator seat so the oil never fouls it. The 1/4" port and 1300 g mass place it in the GAC300 size class, which needs a proper panel or frame mount rather than support from the tubing.
The metal bowl (C) is a build choice for tougher surroundings, while the 5 um element (W) traps far finer particles than the standard 40 um grade - suited for precision valves or instrument air, at the cost of more frequent element service. It operates at 0.15-0.9 MPa (20-130 psi) with a max pressure of 1.0 MPa (145 psi) and proof pressure of 1.5 MPa (215 psi). The automatic drain (A) clears condensate without an operator, and the circular gauge is fitted, reading MPa/psi on the default NPT thread.
| Model | Airtac GAC F.R.L. Unit GAC300C08ASWTK |
|---|---|
| Series | GAC300 F.R.L. combination |
| Port size | 1/4" (NPT thread) |
| Filtering grade | 5 µm |
| Pressure range | 0.15 - 0.9 MPa (20 - 130 psi) |
| Type | Standard |
| Bowl material | Metal |
| Drain type | Automatic drain |
| Fluid | Air |
|---|---|
| Max. pressure | 1.0 MPa (145 psi) |
| Proof pressure | 1.5 MPa (215 psi) |
| Temperature range | -5 to +70 °C (unfreeze) |
| Capacity of drain bowl | 60 cc |
| Capacity of oil bowl | 98 cc |
| Recommended lubricant | ISO VG 32 or equivalent |
| Weight | 1300 g |
Specifications follow the official AirTAC GAC catalogue (pages 216-217). Air must not freeze in the unit. The fitted circular gauge reads in psi / bar, set by the NPT thread code.
| GAC300 | GA300 series F.R.L. unit — sets ports, bowl capacity and weight. |
|---|---|
| C | Bowl material: Metal. Available on this body: PC (blank), Metal (C), Nylon (N). |
| 08 | Port size 1/4". This body offers 08 = 1/4", 10 = 3/8", 15 = 1/2". |
| A | Drain: Automatic drain. |
| S | Standard type — 0.15 - 0.9 MPa (20 - 130 psi). This body offers Standard (S) or Lower pressure (L). |
| (blank) | Circular pressure gauge fitted. |
| W | Filtering grade 5 µm. |
| T | NPT thread; gauge scale psi / bar. |
| K | Reverse-flow (reflux) valve attached. |
Constituent units, orderable separately as spares: GAF300-08 filter, GAR300-08 regulator, GAL300-08 lubricator — all three share this body and port.
Figures are the end of the flow curve plotted in the AirTAC catalogue at 0.7 MPa inlet pressure — a sizing envelope for comparing bodies, not a rated flow. Read the catalogue curve for a real duty point. Outlet pressure falls as flow rises, so size a body with headroom above your peak demand.
| This model | GAC300 · 1/4" · curve to 3000 L/min |
|---|---|
| One size down | GAC200 |
| One size up | GAC400 (curve to 6000 L/min) |
| Build order | Filter → bracket → regulator → lubricator |
Feed a bank of pneumatic directional valves on a CNC machining center, where the 5 um element protects fine valve internals from particle wear.
Condition air for multiple actuators on an automotive assembly station, with the automatic drain handling condensate from a wet compressor line.
Supply cleaned, regulated, lubricated air to a pneumatic torque tool in a fastening operation, where consistent pressure holds torque repeatability.
Choose the GAC300 body for a mid-size duty: its 60 cc condensate bowl and 98 cc oil bowl sit between the smaller GAC200 (25 cc drain) and the larger GAC400 (100 cc drain). The metal bowl suits aggressive environments, though the common spec of 1.0 MPa max and -5 to 70 C applies to all bowl materials - confirm compatibility for your surroundings. The automatic drain is decisive for unattended or wet lines, and the 5 um element trades finer filtration for more frequent service. The reverse-flow (reflux) valve is fitted, shown as a separate pneumatic symbol in the catalogue with details on its own page. Spares share the same body-port suffix: GAF300-08, GAR300-08, GAL300-08. The regulation headroom above the 0.9 MPa top setting is only about 0.1 MPa, so plan a supply near 1.0 MPa if you need maximum outlet pressure.
Quick checklist
The lubricator adds an oil mist downstream of the regulator. If any part of the line must stay oil-free, use a filter-regulator instead of an F.R.L. combination on that branch.
It operates at 0.15-0.9 MPa (20-130 psi) with a max pressure of 1.0 MPa (145 psi) and proof pressure of 1.5 MPa (215 psi). Temperature range is -5 to 70 C, and it must not freeze. The drain bowl holds 60 cc and the oil bowl 98 cc. Recommended lubricant is ISO VG 32, and the unit weighs 1300 g.
The metal bowl (C) is a build choice for demanding environments, while the 5 um element (W) traps finer particles than the standard 40 um grade. This combination suits precision applications, though the finer element requires more frequent service. The automatic drain clears condensate without operator intervention.
T selects NPT port threads, the North American taper pipe standard. Without it the same order code has PT (Rc) ports, and with G it has G (BSPP) ports; body, function and dimensions do not change.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Most standard models are dispatched in 3-5 days.
Most inquiries answered within 7 hours.
Send us the quantity, thread type (PT / G / NPT) and destination. We confirm price, availability and lead time — usually within 7 hours.