
The AirTAC GAC F.R.L. Unit GAC300C08LNT is a genuine three-unit F.R.L. combination — a filter, a pressure regulator and a lubricator pre-assembled on one bracket with quick mounting clamps. It has 1/4" ports, a 40 µm filter element and regulates 0.15 - 0.4 MPa (20 - 58 psi).
Delivering cleaned, regulated and lubricated air for downstream pneumatics, this AirTAC assembly integrates a filter, regulator and lubricator on a single L-shape bracket. The 1/4in ported unit carries a 40 um element and features a robust metal bowl, operating within the lower 0.15-0.4 MPa (20-58 psi) pressure band. Air passes through the filter first, then the regulator, before oil mist is introduced last so the internal seat never fouls.
Because the N follows the port code, no pressure gauge ships with this unit, though a 1/8in connection is machined into the body to accept one later if visual monitoring becomes necessary. The metal bowl equips the assembly for harsher industrial settings where polycarbonate might degrade. Condensate is managed by a semi-auto drain that discharges on every pressure drop, paired with a manual override for on-demand emptying of the 60 cc bowl. Order code GAC300C08LNT has NPT ports (the T in the code) for North American pipe fittings.
| Model | Airtac GAC F.R.L. Unit GAC300C08LNT |
|---|---|
| Series | GAC300 F.R.L. combination |
| Port size | 1/4" (NPT thread) |
| Filtering grade | 40 µm |
| Pressure range | 0.15 - 0.4 MPa (20 - 58 psi) |
| Type | Lower pressure |
| Bowl material | Metal |
| Drain type | Semi-auto drain + manual drain |
| Fluid | Air |
|---|---|
| Max. pressure | 1.0 MPa (145 psi) |
| Proof pressure | 1.5 MPa (215 psi) |
| Temperature range | -5 to +70 °C (unfreeze) |
| Capacity of drain bowl | 60 cc |
| Capacity of oil bowl | 98 cc |
| Recommended lubricant | ISO VG 32 or equivalent |
| Weight | 1300 g |
Specifications follow the official AirTAC GAC catalogue (pages 216-217). Air must not freeze in the unit. No gauge is supplied with this model — the gauge connection on a GAC300 is 1/8" if you add one.
| GAC300 | GA300 series F.R.L. unit — sets ports, bowl capacity and weight. |
|---|---|
| C | Bowl material: Metal. Available on this body: PC (blank), Metal (C), Nylon (N). |
| 08 | Port size 1/4". This body offers 08 = 1/4", 10 = 3/8", 15 = 1/2". |
| (blank) | Drain: Semi-auto drain + manual drain. |
| L | Lower pressure type — 0.15 - 0.4 MPa (20 - 58 psi). This body offers Standard (S) or Lower pressure (L). |
| N | No pressure gauge; 1/8" gauge connection. |
| (blank) | Filtering grade 40 µm. |
| T | NPT thread; gauge scale psi / bar. |
| (blank) | No reverse-flow valve. |
Constituent units, orderable separately as spares: GAF300-08 filter, GAR300-08 regulator, GAL300-08 lubricator — all three share this body and port.
Figures are the end of the flow curve plotted in the AirTAC catalogue at 0.7 MPa inlet pressure — a sizing envelope for comparing bodies, not a rated flow. Read the catalogue curve for a real duty point. Outlet pressure falls as flow rises, so size a body with headroom above your peak demand.
| This model | GAC300 · 1/4" · curve to 3000 L/min |
|---|---|
| One size down | GAC200 |
| One size up | GAC400 (curve to 6000 L/min) |
| Build order | Filter → bracket → regulator → lubricator |
Feeds delicate pneumatic grippers handling electronics where actuation forces must stay under 0.4 MPa to prevent part crushing.
Conditions air for laboratory dispensing robots, providing stable low-pressure output and oil mist for moving valve actuators.
Regulates air for textile spinning cylinders where lower tension is critical and a durable metal bowl resists lint build-up.
Choose this 1300 g GAC300 body when a machine requires low-pressure actuation up to 0.4 MPa, as selecting the L type means giving up the standard 0.9 MPa ceiling entirely. If the application demands higher flow, stepping up to the GAC400 roughly doubles the plotted flow envelope from 3000 to 6000 L/min at 0.7 MPa inlet, while dropping to the GAC200 halves it to 1750 L/min. Should the downstream line require strictly oil-free air, omit the lubricator and choose a dedicated filter-regulator instead. For maintenance, the individual elements are separately orderable as GAF300-08, GAR300-08 and GAL300-08. Choosing the lower-pressure L type limits the ceiling to 44% of the standard 0.9 MPa maximum, making it strictly unsuitable for high-force cylinders.
Quick checklist
The lubricator adds an oil mist downstream of the regulator. If any part of the line must stay oil-free, use a filter-regulator instead of an F.R.L. combination on that branch.
This lower-pressure type operates at 0.15-0.4 MPa (20-58 psi) with a max pressure of 1.0 MPa (145 psi) and a proof pressure of 1.5 MPa (215 psi). It functions from -5 to 70 C, weighs 1300 g, holds 60 cc of condensate and 98 cc of oil, and uses ISO VG 32 lubricant.
The N after the port code indicates no gauge is supplied, leaving the set pressure unreadable unless you add one to the 1/8in connection. The metal bowl provides durability for harsh environments, and the semi-auto drain pairs with a manual override to empty condensate.
T selects NPT port threads, the North American taper pipe standard. Without it the same order code has PT (Rc) ports, and with G it has G (BSPP) ports; body, function and dimensions do not change.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Most standard models are dispatched in 3-5 days.
Most inquiries answered within 7 hours.
Send us the quantity, thread type (PT / G / NPT) and destination. We confirm price, availability and lead time — usually within 7 hours.