
The AirTAC GAC F.R.L. Unit GAC300C08LWTK is a genuine three-unit F.R.L. combination — a filter, a pressure regulator and a lubricator pre-assembled on one bracket with quick mounting clamps. It has 1/4" ports, a 5 µm filter element and regulates 0.15 - 0.4 MPa (20 - 58 psi).
Delivering cleaned, pressure-set and lubricated air, this GAC300C08LWTK assembly integrates a filter, regulator and lubricator on a single L-shape bracket. The 1/4in port feeds a 5 um element that captures fine particulates for sensitive pneumatics. A metal bowl houses the 60 cc condensate sump and 98 cc oil reservoir. This lower-pressure type regulates from 0.15-0.4 MPa (20-58 psi), and a circular gauge reading MPa/psi is fitted for the default NPT thread.
Air routing places the lubricator last so oil mist never fouls the regulator seat. The 1300 g mass needs a firm panel mount rather than tubing support. A semi-auto and manual drain pair is fitted, dumping condensate on pressure drops or on demand. This configuration includes a reverse-flow (reflux) valve, drawn as a separate pneumatic symbol in the catalogue. If the downstream line requires clean air without oil, omit the lubricator and choose a dedicated filter-regulator instead.
| Model | Airtac GAC F.R.L. Unit GAC300C08LWTK |
|---|---|
| Series | GAC300 F.R.L. combination |
| Port size | 1/4" (NPT thread) |
| Filtering grade | 5 µm |
| Pressure range | 0.15 - 0.4 MPa (20 - 58 psi) |
| Type | Lower pressure |
| Bowl material | Metal |
| Drain type | Semi-auto drain + manual drain |
| Fluid | Air |
|---|---|
| Max. pressure | 1.0 MPa (145 psi) |
| Proof pressure | 1.5 MPa (215 psi) |
| Temperature range | -5 to +70 °C (unfreeze) |
| Capacity of drain bowl | 60 cc |
| Capacity of oil bowl | 98 cc |
| Recommended lubricant | ISO VG 32 or equivalent |
| Weight | 1300 g |
Specifications follow the official AirTAC GAC catalogue (pages 216-217). Air must not freeze in the unit. The fitted circular gauge reads in psi / bar, set by the NPT thread code.
| GAC300 | GA300 series F.R.L. unit — sets ports, bowl capacity and weight. |
|---|---|
| C | Bowl material: Metal. Available on this body: PC (blank), Metal (C), Nylon (N). |
| 08 | Port size 1/4". This body offers 08 = 1/4", 10 = 3/8", 15 = 1/2". |
| (blank) | Drain: Semi-auto drain + manual drain. |
| L | Lower pressure type — 0.15 - 0.4 MPa (20 - 58 psi). This body offers Standard (S) or Lower pressure (L). |
| (blank) | Circular pressure gauge fitted. |
| W | Filtering grade 5 µm. |
| T | NPT thread; gauge scale psi / bar. |
| K | Reverse-flow (reflux) valve attached. |
Constituent units, orderable separately as spares: GAF300-08 filter, GAR300-08 regulator, GAL300-08 lubricator — all three share this body and port.
Figures are the end of the flow curve plotted in the AirTAC catalogue at 0.7 MPa inlet pressure — a sizing envelope for comparing bodies, not a rated flow. Read the catalogue curve for a real duty point. Outlet pressure falls as flow rises, so size a body with headroom above your peak demand.
| This model | GAC300 · 1/4" · curve to 3000 L/min |
|---|---|
| One size down | GAC200 |
| One size up | GAC400 (curve to 6000 L/min) |
| Build order | Filter → bracket → regulator → lubricator |
Feeds low-pressure solenoid banks demanding 5 um clean air and a steady 0.4 MPa ceiling without risking over-pressurization.
Conditions supply air for sensitive test fixtures, adding controlled oil mist via the 98 cc reservoir for small actuator slides.
Regulates delicate gripping force on carton sealing lines, utilizing the semi-auto drain to clear 60 cc of moisture during shifts.
Choose this 1/4in unit for low-pressure duties up to 0.4 MPa where fine 5 um filtration protects precision valves. The metal bowl suits rugged environments, while the fitted NPT gauge lets operators verify the 20-58 psi range directly. Stepping to a GAC400 body shifts the flow envelope from 3000 L/min to 6000 L/min at 0.7 MPa inlet, and increases the condensate sump from 60 cc to 100 cc. Spares follow the body-port suffix exactly: GAF300-08, GAR300-08 and GAL300-08. Because the lower-pressure ceiling is 44% of the 0.9 MPa standard type maximum, never specify this L variant if the machine might later need higher actuation force.
Quick checklist
The lubricator adds an oil mist downstream of the regulator. If any part of the line must stay oil-free, use a filter-regulator instead of an F.R.L. combination on that branch.
This lower-pressure type operates at 0.15-0.4 MPa (20-58 psi) with a max pressure of 1.0 MPa (145 psi) and a proof pressure of 1.5 MPa (215 psi). It features a 5 um element, a 60 cc drain bowl, a 98 cc oil bowl, and weighs 1300 g. The temperature range is -5 to 70 C, and the recommended lubricant is ISO VG 32.
The K indicates a reverse-flow (reflux) valve is fitted. The catalogue shows this as a separate pneumatic symbol with details on its own page. This unit also includes the semi-auto and manual drain pair, a metal bowl, and a 5 um fine element.
T selects NPT port threads, the North American taper pipe standard. Without it the same order code has PT (Rc) ports, and with G it has G (BSPP) ports; body, function and dimensions do not change.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Most standard models are dispatched in 3-5 days.
Most inquiries answered within 7 hours.
Send us the quantity, thread type (PT / G / NPT) and destination. We confirm price, availability and lead time — usually within 7 hours.