
The AirTAC GAC F.R.L. Unit GAC300C08ST is a genuine three-unit F.R.L. combination — a filter, a pressure regulator and a lubricator pre-assembled on one bracket with quick mounting clamps. It has 1/4" ports, a 40 µm filter element and regulates 0.15 - 0.9 MPa (20 - 130 psi).
The GAC300C08ST is a three-unit F.R.L. combination - filter, regulator and lubricator - pre-assembled on a single L-shape bracket with quick mounting clamps. With its 1/4" port and 1300 g mass, it suits compact machine builds where the air prep must mount to a panel or frame, not hang from the tubing. The metal bowl adds robustness for shop-floor environments where a polycarbonate bowl might be a concern.
Air passes through the 40 um filter element, then the regulator holds the outlet between 0.15-0.9 MPa (20-130 psi), and finally the lubricator adds oil mist downstream of the regulator so the oil never fouls the valve seat. The 60 cc condensate bowl and 98 cc oil bowl define the service rhythm - with the semi-auto drain dumping on each pressure drop and a manual drain for on-demand use, this unit suits lines that see regular operator attention. This version has NPT ports (the T in the order code) for North American pipe fittings.
| Model | Airtac GAC F.R.L. Unit GAC300C08ST |
|---|---|
| Series | GAC300 F.R.L. combination |
| Port size | 1/4" (NPT thread) |
| Filtering grade | 40 µm |
| Pressure range | 0.15 - 0.9 MPa (20 - 130 psi) |
| Type | Standard |
| Bowl material | Metal |
| Drain type | Semi-auto drain + manual drain |
| Fluid | Air |
|---|---|
| Max. pressure | 1.0 MPa (145 psi) |
| Proof pressure | 1.5 MPa (215 psi) |
| Temperature range | -5 to +70 °C (unfreeze) |
| Capacity of drain bowl | 60 cc |
| Capacity of oil bowl | 98 cc |
| Recommended lubricant | ISO VG 32 or equivalent |
| Weight | 1300 g |
Specifications follow the official AirTAC GAC catalogue (pages 216-217). Air must not freeze in the unit. The fitted circular gauge reads in psi / bar, set by the NPT thread code.
| GAC300 | GA300 series F.R.L. unit — sets ports, bowl capacity and weight. |
|---|---|
| C | Bowl material: Metal. Available on this body: PC (blank), Metal (C), Nylon (N). |
| 08 | Port size 1/4". This body offers 08 = 1/4", 10 = 3/8", 15 = 1/2". |
| (blank) | Drain: Semi-auto drain + manual drain. |
| S | Standard type — 0.15 - 0.9 MPa (20 - 130 psi). This body offers Standard (S) or Lower pressure (L). |
| (blank) | Circular pressure gauge fitted. |
| (blank) | Filtering grade 40 µm. |
| T | NPT thread; gauge scale psi / bar. |
| (blank) | No reverse-flow valve. |
Constituent units, orderable separately as spares: GAF300-08 filter, GAR300-08 regulator, GAL300-08 lubricator — all three share this body and port.
Figures are the end of the flow curve plotted in the AirTAC catalogue at 0.7 MPa inlet pressure — a sizing envelope for comparing bodies, not a rated flow. Read the catalogue curve for a real duty point. Outlet pressure falls as flow rises, so size a body with headroom above your peak demand.
| This model | GAC300 · 1/4" · curve to 3000 L/min |
|---|---|
| One size down | GAC200 |
| One size up | GAC400 (curve to 6000 L/min) |
| Build order | Filter → bracket → regulator → lubricator |
Feed a single-acting clamp cylinder on a CNC workholding fixture with regulated, lubricated air at 0.15-0.9 MPa for consistent part hold-down.
Supply a small pneumatic bench press with a stable 0.4 MPa setpoint, using the gauge to verify the pressure stays within the 20-130 psi operating band.
Lubricate the guide-rail adjusters on a packaging conveyor so the moving parts cycle smoothly without seizing during long production runs.
Choose the GAC300C08ST when you need a 1/4" port with a metal bowl and the standard 0.15-0.9 MPa (20-130 psi) range. The metal bowl is a build choice for tougher surroundings - confirm compatibility for aggressive chemicals or solvents, as the catalogue gives no specific resistance data. The semi-auto plus manual drain pair means condensate clears on pressure drops, with manual backup when needed. The circular gauge reads MPa/psi per the default NPT thread. Spares for this body-port are GAF300-08, GAR300-08 and GAL300-08 - all three share the same suffix. If the line must stay oil-free, choose a filter-regulator instead, since the lubricator adds oil mist. The 60 cc drain bowl holds about 2.4x the condensate of the GAC200's 25 cc bowl, so this size class needs less frequent draining.
Quick checklist
The lubricator adds an oil mist downstream of the regulator. If any part of the line must stay oil-free, use a filter-regulator instead of an F.R.L. combination on that branch.
The GAC300C08ST operates at 0.15-0.9 MPa (20-130 psi) with a max pressure of 1.0 MPa (145 psi) and proof pressure of 1.5 MPa (215 psi). Temperature range is -5 to 70 C and it must not freeze. The 60 cc drain bowl and 98 cc oil bowl set the service interval, and ISO VG 32 is the recommended lubricant. The unit weighs 1300 g with a 1/4" port.
The metal bowl is specified by the C code in the model name. It is a build choice for environments where a polycarbonate bowl might be less suitable - the catalogue gives no temperature, chemical or impact data for any bowl material, so confirm compatibility for aggressive surroundings before installing.
T selects NPT port threads, the North American taper pipe standard. Without it the same order code has PT (Rc) ports, and with G it has G (BSPP) ports; body, function and dimensions do not change.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Most standard models are dispatched in 3-5 days.
Most inquiries answered within 7 hours.
Send us the quantity, thread type (PT / G / NPT) and destination. We confirm price, availability and lead time — usually within 7 hours.