verified AirTAC China Authorized Export Seller shield 100% Genuine AirTAC Parts workspace_premium 1-Year Warranty
appsShop by Modelexpand_more
person shopping_cart Request a QuoteQuote
AirTAC GAC300 · F.R.L. Combination (Filter + Regulator + Lubricator)

Airtac GAC F.R.L. Unit GAC300C08SWTK

The AirTAC GAC F.R.L. Unit GAC300C08SWTK is a genuine three-unit F.R.L. combination — a filter, a pressure regulator and a lubricator pre-assembled on one bracket with quick mounting clamps. It has 1/4" ports, a 5 µm filter element and regulates 0.15 - 0.9 MPa (20 - 130 psi).

  • TypeF.R.L. combination
  • Port size1/4"
  • Pressure range0.15 - 0.9 MPa (20 - 130 psi)
  • Filtering grade5 µm
  • Bowl materialMetal
  • Drainsemi-auto + manual
  • Pressure gaugeCircular, psi / bar
  • Weight1300 g
$103.78 $111.28Save 6% Standard model — usually dispatched in 3-5 days
Request a Quote
  • No minimum order. A single piece can be ordered.
  • Shipped from our own warehouse: most standard models dispatch in 3–5 days; custom and non-standard models take 8–10 business days. Transit time after that depends on the destination.
Compare every GAC300-08 bowl, type and element option on one page All GAC300-08 codes →
verified Genuine AirTAC workspace_premium 1-year warranty bolt Reply in 7 h

About the Airtac GAC F.R.L. Unit GAC300C08SWTK

The GAC300C08SWTK is a three-unit F.R.L. combination - filter, regulator and lubricator - pre-assembled on a single L-shape bracket with quick mounting clamps, so there is no inter-unit tubing to leak and commissioning is one bracket. With a 1/4in port and a 1300 g mass, it suits a panel or frame mount rather than support from the air line.

Air passes through the 5 um filter element first, then the regulator holds 0.15-0.9 MPa (20-130 psi), and the lubricator adds oil mist last, downstream of the regulator so the oil never fouls the regulator seat. The metal bowl and the reverse-flow (reflux) valve are fitted as ordered; the catalogue shows the reflux valve as a separate pneumatic symbol with details on its own page. This version has NPT ports (the T in the order code) for North American pipe fittings.

Airtac GAC F.R.L. Unit GAC300C08SWTK Technical Specifications

ModelAirtac GAC F.R.L. Unit GAC300C08SWTK
SeriesGAC300 F.R.L. combination
Port size1/4" (NPT thread)
Filtering grade5 µm
Pressure range0.15 - 0.9 MPa (20 - 130 psi)
TypeStandard
Bowl materialMetal
Drain typeSemi-auto drain + manual drain
FluidAir
Max. pressure1.0 MPa (145 psi)
Proof pressure1.5 MPa (215 psi)
Temperature range-5 to +70 °C (unfreeze)
Capacity of drain bowl60 cc
Capacity of oil bowl98 cc
Recommended lubricantISO VG 32 or equivalent
Weight1300 g

Specifications follow the official AirTAC GAC catalogue (pages 216-217). Air must not freeze in the unit. The fitted circular gauge reads in psi / bar, set by the NPT thread code.

Model Code: Airtac GAC F.R.L. Unit GAC300C08SWTK

GAC300GA300 series F.R.L. unit — sets ports, bowl capacity and weight.
CBowl material: Metal. Available on this body: PC (blank), Metal (C), Nylon (N).
08Port size 1/4". This body offers 08 = 1/4", 10 = 3/8", 15 = 1/2".
(blank)Drain: Semi-auto drain + manual drain.
SStandard type — 0.15 - 0.9 MPa (20 - 130 psi). This body offers Standard (S) or Lower pressure (L).
(blank)Circular pressure gauge fitted.
WFiltering grade 5 µm.
TNPT thread; gauge scale psi / bar.
KReverse-flow (reflux) valve attached.

Constituent units, orderable separately as spares: GAF300-08 filter, GAR300-08 regulator, GAL300-08 lubricator — all three share this body and port.

Size Class & Flow Envelope

  • GAC2001/8"-1/4" · 1750 L/min
  • GAC3001/4"-1/2" · 3000 L/min
  • GAC4003/8"-1/2" · 6000 L/min
  • GAC5003/4" · 7000 L/min
  • GAC6003/4"-1" · 12000 L/min

Figures are the end of the flow curve plotted in the AirTAC catalogue at 0.7 MPa inlet pressure — a sizing envelope for comparing bodies, not a rated flow. Read the catalogue curve for a real duty point. Outlet pressure falls as flow rises, so size a body with headroom above your peak demand.

This modelGAC300 · 1/4" · curve to 3000 L/min
One size downGAC200
One size upGAC400 (curve to 6000 L/min)
Build orderFilter → bracket → regulator → lubricator

Where the Airtac GAC F.R.L. Unit GAC300C08SWTK Is Used

precision_manufacturing

Precision Fixture Clamping

Feed a 1/4in line to a pneumatic clamp on a CNC fixture, where the 5 um element protects the clamp's precision valve from fine abrasive dust.

engineering

Single-Actuator Test Rig

Supply a bench-top test rig with one cylinder, using the regulator to set a stable 0.4 MPa for repeatable force readings and the lubricator to keep the rod seal moving freely.

build

Semi-Auto Assembly Station

Condition air for a small assembly station with a hand-held screwdriver and a push cylinder, where the metal bowl resists knocks on a busy bench.

Is the Airtac GAC F.R.L. Unit GAC300C08SWTK the Right Air-Prep Unit?

Choose this GAC300C08SWTK when you need the 1/4in port size with a 5 um element for finer particle removal than the standard 40 um grade - at the cost of more frequent element service. The metal bowl is a build choice for the environment, though the common specification (1.0 MPa max, -5 to 70 C) is the same as PC or nylon, so confirm compatibility for aggressive surroundings. The semi-auto drain dumps condensate on each pressure drop, with a manual drain for on-demand use; the circular gauge reads MPa/psi on the default NPT thread. The reflux valve is fitted per the code, and the three units are separately orderable as GAF300-08, GAR300-08 and GAL300-08 if a spare is needed.

With a 1.0 MPa maximum supply and a 0.9 MPa top setting, there is only about 0.1 MPa of regulation headroom - plan a supply near 1.0 MPa if you really need 0.9 MPa out, or set lower.

Quick checklist

  • ✓ Body size for your peak flow (1/4" here)
  • ✓ Standard 0.9 MPa or lower-pressure 0.4 MPa
  • ✓ Bowl material: PC (blank), Metal (C), Nylon (N)
  • ✓ Drain: semi-auto + manual, or automatic
  • ✓ Element 40 µm or 5 µm
  • ✓ Thread & gauge scale (PT / G / NPT)
Ask an Engineer

Installation & Maintenance Notes

  • check Install with the airflow arrow: filter first, lubricator last.
  • check Keep inlet pressure at or below 1.0 MPa (145 psi).
  • check Fill the oil bowl with ISO VG 32 or equivalent only.
  • check Drain condensate before the 60 cc bowl fills.
  • check Keep the unit above freezing (-5 to +70 °C, unfreeze).
  • check Support the 1300 g unit on its bracket, not on the tubing.

The lubricator adds an oil mist downstream of the regulator. If any part of the line must stay oil-free, use a filter-regulator instead of an F.R.L. combination on that branch.

Airtac GAC F.R.L. Unit GAC300C08SWTK FAQ

It operates at 0.15-0.9 MPa (20-130 psi) with a max pressure of 1.0 MPa (145 psi) and proof pressure of 1.5 MPa (215 psi). Temperature range is -5 to 70 C, and it must not freeze. The drain bowl holds 60 cc and the oil bowl 98 cc. Recommended lubricant is ISO VG 32, and the unit weighs 1300 g.

The metal bowl (C) is a build choice with the same pressure and temperature ratings as PC or nylon, so it is about the environment rather than higher specs. The reflux valve (K) is fitted as an ordering difference - the catalogue shows it as a separate pneumatic symbol, with details on its own page, but does not specify its function in our data.

T selects NPT port threads, the North American taper pipe standard. Without it the same order code has PT (Rc) ports, and with G it has G (BSPP) ports; body, function and dimensions do not change.

verified

Authorized Export Seller

Genuine AirTAC parts produced by AirTAC factory.

workspace_premium

1-Year Warranty

Covers non-human-caused product damage.

local_shipping

Fast Dispatch

Most standard models are dispatched in 3-5 days.

bolt

Fast Reply

Most inquiries answered within 7 hours.

Request a Quote for Airtac GAC F.R.L. Unit GAC300C08SWTK

Send us the quantity, thread type (PT / G / NPT) and destination. We confirm price, availability and lead time — usually within 7 hours.

Thank you. We received your request for GAC300C08SWTK and will confirm price, availability and lead time — usually within 7 hours.

For the fastest response, keep the complete model number above and include a clear photo of the product label. If photo upload is unavailable, email photos to [email protected] with your model number.