
The AirTAC GAC F.R.L. Unit GAC300N08ALNWTK is a genuine three-unit F.R.L. combination — a filter, a pressure regulator and a lubricator pre-assembled on one bracket with quick mounting clamps. It has 1/4" ports, a 5 µm filter element and regulates 0.15 - 0.4 MPa (20 - 58 psi).
Delivering cleaned, regulated and lubricated air for downstream pneumatics, this AirTAC unit combines a filter, regulator and lubricator on a single L-shape bracket. It features a 1/4in port, a 5 um element and a lower pressure operating range of 0.15-0.4 MPa (20-58 psi). The sequence ensures air passes through the filter first, then the regulator, with oil mist added last so the regulator seat never fouls.
Built with a nylon bowl, this variant includes an automatic drain that clears condensate without an operator, which is decisive for unattended or wet lines. No gauge is supplied, but the body has a 1/8in gauge connection if you need to add one later to read the set pressure. The reverse-flow (reflux) valve is fitted, which the catalogue shows as a separate pneumatic symbol with details on its own page. Order code GAC300N08ALNWTK has NPT ports (the T in the code) for North American pipe fittings.
| Model | Airtac GAC F.R.L. Unit GAC300N08ALNWTK |
|---|---|
| Series | GAC300 F.R.L. combination |
| Port size | 1/4" (NPT thread) |
| Filtering grade | 5 µm |
| Pressure range | 0.15 - 0.4 MPa (20 - 58 psi) |
| Type | Lower pressure |
| Bowl material | Nylon |
| Drain type | Automatic drain |
| Fluid | Air |
|---|---|
| Max. pressure | 1.0 MPa (145 psi) |
| Proof pressure | 1.5 MPa (215 psi) |
| Temperature range | -5 to +70 °C (unfreeze) |
| Capacity of drain bowl | 60 cc |
| Capacity of oil bowl | 98 cc |
| Recommended lubricant | ISO VG 32 or equivalent |
| Weight | 1300 g |
Specifications follow the official AirTAC GAC catalogue (pages 216-217). Air must not freeze in the unit. No gauge is supplied with this model — the gauge connection on a GAC300 is 1/8" if you add one.
| GAC300 | GA300 series F.R.L. unit — sets ports, bowl capacity and weight. |
|---|---|
| N | Bowl material: Nylon. Available on this body: PC (blank), Metal (C), Nylon (N). |
| 08 | Port size 1/4". This body offers 08 = 1/4", 10 = 3/8", 15 = 1/2". |
| A | Drain: Automatic drain. |
| L | Lower pressure type — 0.15 - 0.4 MPa (20 - 58 psi). This body offers Standard (S) or Lower pressure (L). |
| N | No pressure gauge; 1/8" gauge connection. |
| W | Filtering grade 5 µm. |
| T | NPT thread; gauge scale psi / bar. |
| K | Reverse-flow (reflux) valve attached. |
Constituent units, orderable separately as spares: GAF300-08 filter, GAR300-08 regulator, GAL300-08 lubricator — all three share this body and port.
Figures are the end of the flow curve plotted in the AirTAC catalogue at 0.7 MPa inlet pressure — a sizing envelope for comparing bodies, not a rated flow. Read the catalogue curve for a real duty point. Outlet pressure falls as flow rises, so size a body with headroom above your peak demand.
| This model | GAC300 · 1/4" · curve to 3000 L/min |
|---|---|
| One size down | GAC200 |
| One size up | GAC400 (curve to 6000 L/min) |
| Build order | Filter → bracket → regulator → lubricator |
Feeds sensitive solenoid valves in textile machinery where the 5 um element protects tight tolerances and the low 0.4 MPa ceiling prevents seal blowout.
Supplies regulated, oil-misted air to light-duty packaging cylinders that require delicate, consistent pressure to avoid crushing thin cardboard cartons.
Conditions air for laboratory automation actuators, using the automatic drain to handle condensate in intermittently run, unattended test rigs.
Choose this 1300 g assembly for mid-size duties where the system pressure must stay low, as the L type tops out at 0.4 MPa. If the machine may ever need more pressure, this is the wrong part. The 5 um element traps far finer particles than the standard 40 um grade for precision valves, at the cost of more frequent element service. Because oil mist is added downstream, choose a filter-regulator instead if the line must stay oil-free. The three units are separately orderable as GAF300-08, GAR300-08 and GAL300-08, so a clogged element does not mean replacing the whole assembly. Stepping down to the GAC200 body drops the plotted flow envelope from 3000 L/min to 1750 L/min at 0.7 MPa inlet, roughly a 42% reduction. Finally, note that the 0.4 MPa ceiling is 44% of the Standard type's 0.9 MPa maximum.
Quick checklist
The lubricator adds an oil mist downstream of the regulator. If any part of the line must stay oil-free, use a filter-regulator instead of an F.R.L. combination on that branch.
This lower-pressure type operates at 0.15-0.4 MPa (20-58 psi) with a max pressure of 1.0 MPa (145 psi) and a proof pressure of 1.5 MPa (215 psi). The temperature range is -5 to 70 C. It has a 60 cc drain bowl, a 98 cc oil bowl, uses ISO VG 32 lubricant, and weighs 1300 g.
The N in the code means no gauge is supplied from the factory. The body features a 1/8in gauge connection, allowing you to install a separate gauge if you need to visually monitor the 0.15-0.4 MPa set pressure.
T selects NPT port threads, the North American taper pipe standard. Without it the same order code has PT (Rc) ports, and with G it has G (BSPP) ports; body, function and dimensions do not change.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Most standard models are dispatched in 3-5 days.
Most inquiries answered within 7 hours.
Send us the quantity, thread type (PT / G / NPT) and destination. We confirm price, availability and lead time — usually within 7 hours.