
The AirTAC GAC F.R.L. Unit GAC300N08ALTK is a genuine three-unit F.R.L. combination — a filter, a pressure regulator and a lubricator pre-assembled on one bracket with quick mounting clamps. It has 1/4" ports, a 40 µm filter element and regulates 0.15 - 0.4 MPa (20 - 58 psi).
Delivering cleaned, regulated and lubricated air for downstream pneumatics, this GAC300N08ALTK assembly integrates a filter, regulator and lubricator on a single L-shape bracket. The 1/4in port serves the 1300 g body, while the lower-pressure type restricts the operating band to 0.15-0.4 MPa (20-58 psi). A 40 um element captures solid particulates before air reaches the regulator.
Because the lubricator sits last in the sequence, oil mist is introduced downstream of the regulator seat, preventing fouling. This specific unit features a nylon bowl and an automatic drain that empties the 60 cc condensate sump without operator input. A reverse-flow (reflux) valve is fitted, which the catalogue depicts as a separate pneumatic symbol with details on its own page. This version has NPT ports (the T in the order code) for North American pipe fittings.
| Model | Airtac GAC F.R.L. Unit GAC300N08ALTK |
|---|---|
| Series | GAC300 F.R.L. combination |
| Port size | 1/4" (NPT thread) |
| Filtering grade | 40 µm |
| Pressure range | 0.15 - 0.4 MPa (20 - 58 psi) |
| Type | Lower pressure |
| Bowl material | Nylon |
| Drain type | Automatic drain |
| Fluid | Air |
|---|---|
| Max. pressure | 1.0 MPa (145 psi) |
| Proof pressure | 1.5 MPa (215 psi) |
| Temperature range | -5 to +70 °C (unfreeze) |
| Capacity of drain bowl | 60 cc |
| Capacity of oil bowl | 98 cc |
| Recommended lubricant | ISO VG 32 or equivalent |
| Weight | 1300 g |
Specifications follow the official AirTAC GAC catalogue (pages 216-217). Air must not freeze in the unit. The fitted circular gauge reads in psi / bar, set by the NPT thread code.
| GAC300 | GA300 series F.R.L. unit — sets ports, bowl capacity and weight. |
|---|---|
| N | Bowl material: Nylon. Available on this body: PC (blank), Metal (C), Nylon (N). |
| 08 | Port size 1/4". This body offers 08 = 1/4", 10 = 3/8", 15 = 1/2". |
| A | Drain: Automatic drain. |
| L | Lower pressure type — 0.15 - 0.4 MPa (20 - 58 psi). This body offers Standard (S) or Lower pressure (L). |
| (blank) | Circular pressure gauge fitted. |
| (blank) | Filtering grade 40 µm. |
| T | NPT thread; gauge scale psi / bar. |
| K | Reverse-flow (reflux) valve attached. |
Constituent units, orderable separately as spares: GAF300-08 filter, GAR300-08 regulator, GAL300-08 lubricator — all three share this body and port.
Figures are the end of the flow curve plotted in the AirTAC catalogue at 0.7 MPa inlet pressure — a sizing envelope for comparing bodies, not a rated flow. Read the catalogue curve for a real duty point. Outlet pressure falls as flow rises, so size a body with headroom above your peak demand.
| This model | GAC300 · 1/4" · curve to 3000 L/min |
|---|---|
| One size down | GAC200 |
| One size up | GAC400 (curve to 6000 L/min) |
| Build order | Filter → bracket → regulator → lubricator |
Feeds low-pressure air to sensitive lab actuators and glassware handling jigs that cannot tolerate standard 0.9 MPa supply pressures.
Conditions air for small pick-and-place units where the automatic drain clears condensate during continuous daily cycling.
Lubricates and regulates air for delicate spinning or weaving cylinders where a 40 um element protects fine nozzles from clogging.
Choose this configuration for unattended lines requiring a strict 0.15-0.4 MPa (20-58 psi) ceiling, where exceeding 0.4 MPa would damage downstream equipment. The fitted circular gauge reads in MPa/psi for the default NPT thread, letting operators verify the low-pressure setpoint. If the machine must remain oil-free, omit the lubricator and select a filter-regulator instead. For maintenance, the three units are separately orderable as GAF300-08, GAR300-08 and GAL300-08. Stepping up to the GAC400 body increases the plotted flow envelope from 3000 L/min to 6000 L/min at 0.7 MPa inlet, doubling the available capacity. Note that the 0.4 MPa upper limit is 44% of the standard 0.9 MPa ceiling, so confirm your system never requires higher pressure.
Quick checklist
The lubricator adds an oil mist downstream of the regulator. If any part of the line must stay oil-free, use a filter-regulator instead of an F.R.L. combination on that branch.
This lower-pressure unit regulates from 0.15-0.4 MPa (20-58 psi). It has a max pressure of 1.0 MPa (145 psi) and a proof pressure of 1.5 MPa (215 psi). Operating temperature is -5 to 70 C. The condensate bowl holds 60 cc, the oil bowl holds 98 cc, and the assembly weighs 1300 g. Use ISO VG 32 or equivalent lubricant.
The K signifies that a reverse-flow (reflux) valve is attached. The catalogue illustrates this as a distinct pneumatic symbol and directs users to its dedicated page for specific functional details.
T selects NPT port threads, the North American taper pipe standard. Without it the same order code has PT (Rc) ports, and with G it has G (BSPP) ports; body, function and dimensions do not change.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Most standard models are dispatched in 3-5 days.
Most inquiries answered within 7 hours.
Send us the quantity, thread type (PT / G / NPT) and destination. We confirm price, availability and lead time — usually within 7 hours.