
The AirTAC GAC F.R.L. Unit GAC300N08ALWT is a genuine three-unit F.R.L. combination — a filter, a pressure regulator and a lubricator pre-assembled on one bracket with quick mounting clamps. It has 1/4" ports, a 5 µm filter element and regulates 0.15 - 0.4 MPa (20 - 58 psi).
Delivering cleaned, lubricated air at a highly controlled low pressure, this AirTAC unit integrates a filter, regulator and lubricator on a single L-shape bracket. The 1/4in ported body operates in the 0.15-0.4 MPa (20-58 psi) range and uses a 5 um element to trap fine particulates before they reach sensitive downstream valves.
Air passes through the filter first, then the regulator, and finally the lubricator, ensuring oil mist is added downstream so the regulator seat never fouls. The nylon bowl houses a 60 cc condensate volume and an automatic drain that empties without an operator, while the fitted circular gauge reads in MPa and psi for the default NPT thread. Order code GAC300N08ALWT has NPT ports (the T in the code) for North American pipe fittings.
| Model | Airtac GAC F.R.L. Unit GAC300N08ALWT |
|---|---|
| Series | GAC300 F.R.L. combination |
| Port size | 1/4" (NPT thread) |
| Filtering grade | 5 µm |
| Pressure range | 0.15 - 0.4 MPa (20 - 58 psi) |
| Type | Lower pressure |
| Bowl material | Nylon |
| Drain type | Automatic drain |
| Fluid | Air |
|---|---|
| Max. pressure | 1.0 MPa (145 psi) |
| Proof pressure | 1.5 MPa (215 psi) |
| Temperature range | -5 to +70 °C (unfreeze) |
| Capacity of drain bowl | 60 cc |
| Capacity of oil bowl | 98 cc |
| Recommended lubricant | ISO VG 32 or equivalent |
| Weight | 1300 g |
Specifications follow the official AirTAC GAC catalogue (pages 216-217). Air must not freeze in the unit. The fitted circular gauge reads in psi / bar, set by the NPT thread code.
| GAC300 | GA300 series F.R.L. unit — sets ports, bowl capacity and weight. |
|---|---|
| N | Bowl material: Nylon. Available on this body: PC (blank), Metal (C), Nylon (N). |
| 08 | Port size 1/4". This body offers 08 = 1/4", 10 = 3/8", 15 = 1/2". |
| A | Drain: Automatic drain. |
| L | Lower pressure type — 0.15 - 0.4 MPa (20 - 58 psi). This body offers Standard (S) or Lower pressure (L). |
| (blank) | Circular pressure gauge fitted. |
| W | Filtering grade 5 µm. |
| T | NPT thread; gauge scale psi / bar. |
| (blank) | No reverse-flow valve. |
Constituent units, orderable separately as spares: GAF300-08 filter, GAR300-08 regulator, GAL300-08 lubricator — all three share this body and port.
Figures are the end of the flow curve plotted in the AirTAC catalogue at 0.7 MPa inlet pressure — a sizing envelope for comparing bodies, not a rated flow. Read the catalogue curve for a real duty point. Outlet pressure falls as flow rises, so size a body with headroom above your peak demand.
| This model | GAC300 · 1/4" · curve to 3000 L/min |
|---|---|
| One size down | GAC200 |
| One size up | GAC400 (curve to 6000 L/min) |
| Build order | Filter → bracket → regulator → lubricator |
Feeds 1/4in air lines to weaving actuators that require gentle, regulated pressure under 0.4 MPa to prevent yarn breakage.
Supplies clean, 5 um filtered air to sensitive pneumatic metering pumps where a standard 0.9 MPa output would damage glass reagent lines.
Drives light-duty capping heads that rely on precise low-pressure torque, with the automatic drain clearing condensate during continuous runs.
Choose this configuration when a machine requires stable low-pressure actuation rather than the full 0.9 MPa standard range. The 5 um W element catches far finer particles than the 40 um default, trading slightly more frequent element service for better protection of precision instruments. If the downstream line must remain completely oil-free, omit the lubricator and select a filter-regulator instead. The three constituent parts are separately orderable as GAF300-08, GAR300-08 and GAL300-08, meaning a clogged element does not require replacing the whole assembly. Because the 0.4 MPa upper limit is 44% of the standard 0.9 MPa ceiling, never specify this lower-pressure type if the equipment might ever need higher operating force.
Quick checklist
The lubricator adds an oil mist downstream of the regulator. If any part of the line must stay oil-free, use a filter-regulator instead of an F.R.L. combination on that branch.
This lower-pressure type operates at 0.15-0.4 MPa (20-58 psi) with a max pressure of 1.0 MPa (145 psi) and a proof pressure of 1.5 MPa (215 psi). It handles temperatures from -5 to 70 C, uses a 60 cc drain bowl and a 98 cc oil bowl, weighs 1300 g, and requires ISO VG 32 lubricant.
The 5 um element captures very fine particulates for precision pneumatic circuits, requiring closer attention to element service than the 40 um standard. The automatic drain clears the 60 cc condensate bowl without manual intervention, which is decisive for unattended or continuously running equipment.
T selects NPT port threads, the North American taper pipe standard. Without it the same order code has PT (Rc) ports, and with G it has G (BSPP) ports; body, function and dimensions do not change.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Most standard models are dispatched in 3-5 days.
Most inquiries answered within 7 hours.
Send us the quantity, thread type (PT / G / NPT) and destination. We confirm price, availability and lead time — usually within 7 hours.