
The AirTAC GAC F.R.L. Unit GAC300N08ASNT is a genuine three-unit F.R.L. combination — a filter, a pressure regulator and a lubricator pre-assembled on one bracket with quick mounting clamps. It has 1/4" ports, a 40 µm filter element and regulates 0.15 - 0.9 MPa (20 - 130 psi).
Delivering cleaned, regulated and lubricated air for downstream pneumatics, this AirTAC unit integrates a filter, regulator and lubricator on a single L-shape bracket. It features a 1/4in port, a 40 um element and a standard pressure range of 0.15-0.9 MPa (20-130 psi). The nylon bowl equips this assembly for environments where chemical compatibility or specific impact resistance is preferred over standard PC materials.
Because the lubricator sits last in the sequence, oil mist is introduced downstream of the regulator seat to prevent fouling. The automatic drain actively clears condensate from the 60 cc bowl without operator intervention, which is decisive for unattended machinery. No gauge is supplied, but a 1/8in gauge connection allows adding instrumentation later if reading the set pressure becomes necessary. This version has NPT ports (the T in the order code) for North American pipe fittings.
| Model | Airtac GAC F.R.L. Unit GAC300N08ASNT |
|---|---|
| Series | GAC300 F.R.L. combination |
| Port size | 1/4" (NPT thread) |
| Filtering grade | 40 µm |
| Pressure range | 0.15 - 0.9 MPa (20 - 130 psi) |
| Type | Standard |
| Bowl material | Nylon |
| Drain type | Automatic drain |
| Fluid | Air |
|---|---|
| Max. pressure | 1.0 MPa (145 psi) |
| Proof pressure | 1.5 MPa (215 psi) |
| Temperature range | -5 to +70 °C (unfreeze) |
| Capacity of drain bowl | 60 cc |
| Capacity of oil bowl | 98 cc |
| Recommended lubricant | ISO VG 32 or equivalent |
| Weight | 1300 g |
Specifications follow the official AirTAC GAC catalogue (pages 216-217). Air must not freeze in the unit. No gauge is supplied with this model — the gauge connection on a GAC300 is 1/8" if you add one.
| GAC300 | GA300 series F.R.L. unit — sets ports, bowl capacity and weight. |
|---|---|
| N | Bowl material: Nylon. Available on this body: PC (blank), Metal (C), Nylon (N). |
| 08 | Port size 1/4". This body offers 08 = 1/4", 10 = 3/8", 15 = 1/2". |
| A | Drain: Automatic drain. |
| S | Standard type — 0.15 - 0.9 MPa (20 - 130 psi). This body offers Standard (S) or Lower pressure (L). |
| N | No pressure gauge; 1/8" gauge connection. |
| (blank) | Filtering grade 40 µm. |
| T | NPT thread; gauge scale psi / bar. |
| (blank) | No reverse-flow valve. |
Constituent units, orderable separately as spares: GAF300-08 filter, GAR300-08 regulator, GAL300-08 lubricator — all three share this body and port.
Figures are the end of the flow curve plotted in the AirTAC catalogue at 0.7 MPa inlet pressure — a sizing envelope for comparing bodies, not a rated flow. Read the catalogue curve for a real duty point. Outlet pressure falls as flow rises, so size a body with headroom above your peak demand.
| This model | GAC300 · 1/4" · curve to 3000 L/min |
|---|---|
| One size down | GAC200 |
| One size up | GAC400 (curve to 6000 L/min) |
| Build order | Filter → bracket → regulator → lubricator |
Feeds clean, oiled air at a stable pressure to automated tool change mechanisms on machining centers.
Conditions air for the high-speed pneumatic sealing jaws and cutting blades on continuous packaging lines.
Supplies the necessary lubricated air to pneumatic pop-up sorters and diverters along material handling conveyors.
This GAC300 body pairs a 1/4in port with a 60 cc condensate bowl and a 98 cc oil reservoir, requiring panel or frame mounting rather than tubing support. Stepping up to the GAC400 increases the drain bowl to 100 cc, whereas dropping to the GAC200 reduces it to 25 cc. If the downstream line must remain free of oil, omit the lubricator and choose a separate filter-regulator instead. For maintenance, the three units are independently replaceable using GAF300-08, GAR300-08 and GAL300-08 spares. Since max supply is 1.0 MPa and the Standard type regulates to 0.9 MPa, there is only about 0.1 MPa of headroom above the top setting, so plan a supply near 1.0 MPa if you truly need 0.9 MPa out.
Quick checklist
The lubricator adds an oil mist downstream of the regulator. If any part of the line must stay oil-free, use a filter-regulator instead of an F.R.L. combination on that branch.
This model operates at 0.15-0.9 MPa (20-130 psi) with a max pressure of 1.0 MPa (145 psi) and a proof pressure of 1.5 MPa (215 psi). The temperature range is -5 to 70 C. It features a 60 cc drain bowl, a 98 cc oil bowl, a 40 um element, a 1/4in port, and weighs 1300 g. The recommended lubricant is ISO VG 32.
The N in the ordering code indicates no gauge is supplied. The body features a 1/8in gauge connection, allowing operators to install a separate NPT-threaded gauge reading in MPa/psi if they need to visually monitor the downstream set pressure.
T selects NPT port threads, the North American taper pipe standard. Without it the same order code has PT (Rc) ports, and with G it has G (BSPP) ports; body, function and dimensions do not change.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Most standard models are dispatched in 3-5 days.
Most inquiries answered within 7 hours.
Send us the quantity, thread type (PT / G / NPT) and destination. We confirm price, availability and lead time — usually within 7 hours.