
The AirTAC GAC F.R.L. Unit GAC300N08ASWT is a genuine three-unit F.R.L. combination — a filter, a pressure regulator and a lubricator pre-assembled on one bracket with quick mounting clamps. It has 1/4" ports, a 5 µm filter element and regulates 0.15 - 0.9 MPa (20 - 130 psi).
Delivering cleaned, regulated and lubricated air for pneumatic systems, this AirTAC unit combines a filter, regulator and lubricator on a single L-shape bracket. It features a 1/4in port, a standard pressure range of 0.15-0.9 MPa (20-130 psi), and a 5 um element for trapping fine particles. The nylon bowl equips this assembly for environments where material compatibility dictates a non-polycarbonate choice.
Air passes through the filter first, then the regulator, and finally the lubricator, ensuring oil mist is added downstream so the regulator seat never fouls. An automatic drain clears condensate from the 60 cc bowl without operator intervention, while the fitted circular gauge reads in MPa/psi for the default NPT thread. Weighing 1300 g, the assembly uses quick mounting clamps to eliminate inter-unit tubing leaks. Order code GAC300N08ASWT has NPT ports (the T in the code) for North American pipe fittings.
| Model | Airtac GAC F.R.L. Unit GAC300N08ASWT |
|---|---|
| Series | GAC300 F.R.L. combination |
| Port size | 1/4" (NPT thread) |
| Filtering grade | 5 µm |
| Pressure range | 0.15 - 0.9 MPa (20 - 130 psi) |
| Type | Standard |
| Bowl material | Nylon |
| Drain type | Automatic drain |
| Fluid | Air |
|---|---|
| Max. pressure | 1.0 MPa (145 psi) |
| Proof pressure | 1.5 MPa (215 psi) |
| Temperature range | -5 to +70 °C (unfreeze) |
| Capacity of drain bowl | 60 cc |
| Capacity of oil bowl | 98 cc |
| Recommended lubricant | ISO VG 32 or equivalent |
| Weight | 1300 g |
Specifications follow the official AirTAC GAC catalogue (pages 216-217). Air must not freeze in the unit. The fitted circular gauge reads in psi / bar, set by the NPT thread code.
| GAC300 | GA300 series F.R.L. unit — sets ports, bowl capacity and weight. |
|---|---|
| N | Bowl material: Nylon. Available on this body: PC (blank), Metal (C), Nylon (N). |
| 08 | Port size 1/4". This body offers 08 = 1/4", 10 = 3/8", 15 = 1/2". |
| A | Drain: Automatic drain. |
| S | Standard type — 0.15 - 0.9 MPa (20 - 130 psi). This body offers Standard (S) or Lower pressure (L). |
| (blank) | Circular pressure gauge fitted. |
| W | Filtering grade 5 µm. |
| T | NPT thread; gauge scale psi / bar. |
| (blank) | No reverse-flow valve. |
Constituent units, orderable separately as spares: GAF300-08 filter, GAR300-08 regulator, GAL300-08 lubricator — all three share this body and port.
Figures are the end of the flow curve plotted in the AirTAC catalogue at 0.7 MPa inlet pressure — a sizing envelope for comparing bodies, not a rated flow. Read the catalogue curve for a real duty point. Outlet pressure falls as flow rises, so size a body with headroom above your peak demand.
| This model | GAC300 · 1/4" · curve to 3000 L/min |
|---|---|
| One size down | GAC200 |
| One size up | GAC400 (curve to 6000 L/min) |
| Build order | Filter → bracket → regulator → lubricator |
Feeds sensitive directional control valves requiring highly clean, 5 um filtered and lubricated air to prevent sticking and extend spool life.
Conditions air for small actuators on form-fill-seal equipment, with the automatic drain handling condensate during long, unattended production runs.
Supplies regulated air to benchtop analytical devices, where the nylon bowl offers specific chemical compatibility for specialized environments.
Choose this GAC300 size class when your application requires the 5 um element for precision valves or instrument air, accepting that finer filtration demands more frequent element service. If your machine needs a higher flow capacity, stepping up to the GAC400 body increases the plotted envelope from 3000 L/min to 6000 L/min at 0.7 MPa inlet. The automatic drain suits unattended or wet lines, whereas a blank drain code provides semi-auto and manual options. For maintenance, order the GAF300-08, GAR300-08 and GAL300-08 spares. Remember that max supply is 1.0 MPa and the standard type regulates to 0.9 MPa, leaving only about 0.1 MPa of regulation headroom above the top setting.
Quick checklist
The lubricator adds an oil mist downstream of the regulator. If any part of the line must stay oil-free, use a filter-regulator instead of an F.R.L. combination on that branch.
This standard type unit operates at 0.15-0.9 MPa (20-130 psi) with a max pressure of 1.0 MPa (145 psi) and a proof pressure of 1.5 MPa (215 psi). It functions from -5 to 70 C, weighs 1300 g, and features a 60 cc drain bowl and a 98 cc oil bowl. The recommended lubricant is ISO VG 32.
The W code specifies a 5 um element, which traps far finer particles than the standard 40 um grade, making it ideal for precision pneumatics at the cost of more frequent element service. The N before the port indicates a nylon bowl, providing an alternative to polycarbonate or metal for specific chemical or environmental compatibility.
T selects NPT port threads, the North American taper pipe standard. Without it the same order code has PT (Rc) ports, and with G it has G (BSPP) ports; body, function and dimensions do not change.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Most standard models are dispatched in 3-5 days.
Most inquiries answered within 7 hours.
Send us the quantity, thread type (PT / G / NPT) and destination. We confirm price, availability and lead time — usually within 7 hours.