
The AirTAC GAC F.R.L. Unit GAC300N08ASWTK is a genuine three-unit F.R.L. combination — a filter, a pressure regulator and a lubricator pre-assembled on one bracket with quick mounting clamps. It has 1/4" ports, a 5 µm filter element and regulates 0.15 - 0.9 MPa (20 - 130 psi).
Delivering cleaned, regulated and lubricated air for downstream pneumatics, this AirTAC F.R.L. combination pre-assembles a filter, regulator and lubricator on a single L-shape bracket. The 1/4in ported body operates at 0.15-0.9 MPa (20-130 psi) and uses a 5 um element to trap fine particulates before they reach sensitive valves. Because the lubricator sits last in the sequence, oil mist is introduced downstream of the regulator seat, preventing fouling of the pressure-control mechanism.
Weighing 1300 g, this unit pairs a 60 cc condensate bowl with a 98 cc oil reservoir. The nylon bowl material is specified for this build, and the automatic drain actively clears liquid without an operator present. A circular gauge is fitted to read the set pressure in MPa/psi, and the assembly includes a reverse-flow (reflux) valve, which the catalogue shows as a separate pneumatic symbol on its own page. Order code GAC300N08ASWTK has NPT ports (the T in the code) for North American pipe fittings.
| Model | Airtac GAC F.R.L. Unit GAC300N08ASWTK |
|---|---|
| Series | GAC300 F.R.L. combination |
| Port size | 1/4" (NPT thread) |
| Filtering grade | 5 µm |
| Pressure range | 0.15 - 0.9 MPa (20 - 130 psi) |
| Type | Standard |
| Bowl material | Nylon |
| Drain type | Automatic drain |
| Fluid | Air |
|---|---|
| Max. pressure | 1.0 MPa (145 psi) |
| Proof pressure | 1.5 MPa (215 psi) |
| Temperature range | -5 to +70 °C (unfreeze) |
| Capacity of drain bowl | 60 cc |
| Capacity of oil bowl | 98 cc |
| Recommended lubricant | ISO VG 32 or equivalent |
| Weight | 1300 g |
Specifications follow the official AirTAC GAC catalogue (pages 216-217). Air must not freeze in the unit. The fitted circular gauge reads in psi / bar, set by the NPT thread code.
| GAC300 | GA300 series F.R.L. unit — sets ports, bowl capacity and weight. |
|---|---|
| N | Bowl material: Nylon. Available on this body: PC (blank), Metal (C), Nylon (N). |
| 08 | Port size 1/4". This body offers 08 = 1/4", 10 = 3/8", 15 = 1/2". |
| A | Drain: Automatic drain. |
| S | Standard type — 0.15 - 0.9 MPa (20 - 130 psi). This body offers Standard (S) or Lower pressure (L). |
| (blank) | Circular pressure gauge fitted. |
| W | Filtering grade 5 µm. |
| T | NPT thread; gauge scale psi / bar. |
| K | Reverse-flow (reflux) valve attached. |
Constituent units, orderable separately as spares: GAF300-08 filter, GAR300-08 regulator, GAL300-08 lubricator — all three share this body and port.
Figures are the end of the flow curve plotted in the AirTAC catalogue at 0.7 MPa inlet pressure — a sizing envelope for comparing bodies, not a rated flow. Read the catalogue curve for a real duty point. Outlet pressure falls as flow rises, so size a body with headroom above your peak demand.
| This model | GAC300 · 1/4" · curve to 3000 L/min |
|---|---|
| One size down | GAC200 |
| One size up | GAC400 (curve to 6000 L/min) |
| Build order | Filter → bracket → regulator → lubricator |
Feeds clean, lubricated air to pneumatic tool changers on machining centers, protecting tight-tolerance spindles from particulate ingress.
Conditions air for high-speed packaging line sealing jaws, ensuring consistent actuation speeds and preventing valve stiction.
Supplies regulated, finely filtered air to analytical instrument rails where 5 um particle control protects delicate pneumatic logic.
Choose this configuration when a machine requires fine 5 um filtration alongside standard 0.15-0.9 MPa regulation on a 1/4in line. The automatic drain suits unattended or wet installations, while the fitted NPT-thread gauge lets technicians verify pressure directly in MPa/psi. If the downstream process cannot tolerate oil mist, omit the lubricator and select a dedicated filter-regulator instead. For maintenance, the three units are separately orderable as GAF300-08, GAR300-08 and GAL300-08. Stepping down to the GAC200 body reduces the plotted flow envelope from 3000 L/min to 1750 L/min at 0.7 MPa inlet, whereas stepping up to the GAC400 expands it to 6000 L/min. The catalogue flow curve for the GAC300 is plotted to 3000 L/min at 0.7 MPa inlet, roughly 1.7x the GAC200's 1750 L/min envelope.
Quick checklist
The lubricator adds an oil mist downstream of the regulator. If any part of the line must stay oil-free, use a filter-regulator instead of an F.R.L. combination on that branch.
This standard type unit regulates from 0.15-0.9 MPa (20-130 psi) with a maximum pressure of 1.0 MPa (145 psi) and a proof pressure of 1.5 MPa (215 psi). It operates from -5 to 70 C, weighs 1300 g, and features a 60 cc drain bowl alongside a 98 cc oil bowl. The recommended lubricant is ISO VG 32.
The W code specifies a 5 um element instead of the standard 40 um, trapping finer particles for precision pneumatics at the cost of more frequent element service. The K code means a reverse-flow (reflux) valve is fitted, shown as a separate pneumatic symbol in the catalogue, with full details on its own page.
T selects NPT port threads, the North American taper pipe standard. Without it the same order code has PT (Rc) ports, and with G it has G (BSPP) ports; body, function and dimensions do not change.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Most standard models are dispatched in 3-5 days.
Most inquiries answered within 7 hours.
Send us the quantity, thread type (PT / G / NPT) and destination. We confirm price, availability and lead time — usually within 7 hours.