
The AirTAC GAC F.R.L. Unit GAC300N08LNWT is a genuine three-unit F.R.L. combination — a filter, a pressure regulator and a lubricator pre-assembled on one bracket with quick mounting clamps. It has 1/4" ports, a 5 µm filter element and regulates 0.15 - 0.4 MPa (20 - 58 psi).
Delivering cleaned, regulated and lubricated air for pneumatic setups, this AirTAC GAC300N08LNWT combination integrates a filter, regulator and lubricator on a single L-shape bracket. The 1/4in port serves as the entry point, while the 5 um element captures fine particulates before the air reaches downstream mechanisms. Because the lubricator sits last in the sequence, oil mist is introduced downstream of the regulator seat, preventing fouling of the pressure control mechanism.
Configured for low-pressure duties, the unit regulates between 0.15-0.4 MPa (20-58 psi) and carries a 1300 g mass that requires a firm panel or frame mount rather than tubing support. The nylon bowl houses a 60 cc condensate sump and a 98 cc oil reservoir. No gauge is supplied, but a 1/8in connection is provided if operators need to add one to monitor the set pressure. This version has NPT ports (the T in the order code) for North American pipe fittings.
| Model | Airtac GAC F.R.L. Unit GAC300N08LNWT |
|---|---|
| Series | GAC300 F.R.L. combination |
| Port size | 1/4" (NPT thread) |
| Filtering grade | 5 µm |
| Pressure range | 0.15 - 0.4 MPa (20 - 58 psi) |
| Type | Lower pressure |
| Bowl material | Nylon |
| Drain type | Semi-auto drain + manual drain |
| Fluid | Air |
|---|---|
| Max. pressure | 1.0 MPa (145 psi) |
| Proof pressure | 1.5 MPa (215 psi) |
| Temperature range | -5 to +70 °C (unfreeze) |
| Capacity of drain bowl | 60 cc |
| Capacity of oil bowl | 98 cc |
| Recommended lubricant | ISO VG 32 or equivalent |
| Weight | 1300 g |
Specifications follow the official AirTAC GAC catalogue (pages 216-217). Air must not freeze in the unit. No gauge is supplied with this model — the gauge connection on a GAC300 is 1/8" if you add one.
| GAC300 | GA300 series F.R.L. unit — sets ports, bowl capacity and weight. |
|---|---|
| N | Bowl material: Nylon. Available on this body: PC (blank), Metal (C), Nylon (N). |
| 08 | Port size 1/4". This body offers 08 = 1/4", 10 = 3/8", 15 = 1/2". |
| (blank) | Drain: Semi-auto drain + manual drain. |
| L | Lower pressure type — 0.15 - 0.4 MPa (20 - 58 psi). This body offers Standard (S) or Lower pressure (L). |
| N | No pressure gauge; 1/8" gauge connection. |
| W | Filtering grade 5 µm. |
| T | NPT thread; gauge scale psi / bar. |
| (blank) | No reverse-flow valve. |
Constituent units, orderable separately as spares: GAF300-08 filter, GAR300-08 regulator, GAL300-08 lubricator — all three share this body and port.
Figures are the end of the flow curve plotted in the AirTAC catalogue at 0.7 MPa inlet pressure — a sizing envelope for comparing bodies, not a rated flow. Read the catalogue curve for a real duty point. Outlet pressure falls as flow rises, so size a body with headroom above your peak demand.
| This model | GAC300 · 1/4" · curve to 3000 L/min |
|---|---|
| One size down | GAC200 |
| One size up | GAC400 (curve to 6000 L/min) |
| Build order | Filter → bracket → regulator → lubricator |
Regulates low-pressure air at 0.15-0.4 MPa for sensitive analytical instruments, utilizing the 5 um filter to protect delicate flow controllers from fine particulate ingress.
Feeds a controlled oil mist to high-speed loom bearings while maintaining a stable 1/4in port supply, preventing friction wear without overpressurizing delicate fabric tensioners.
Conditions air for small pneumatic clamps requiring gentle actuation forces, where the 1300 g assembly mounts neatly onto a sub-plate alongside manual pick-and-place units.
Choose this assembly for applications requiring precise low-pressure control, noting that its 0.15-0.4 MPa (20-58 psi) operating range tops out well below the standard 0.9 MPa ceiling, making it unsuitable for systems that might later demand higher force. The 5 um element offers superior protection for sensitive valves compared to the standard 40 um grade, though it will require more frequent replacement. A semi-auto and manual drain pair is fitted to the 60 cc bowl, emptying condensate on each pressure drop or on demand. If the downstream line must remain oil-free, omit the lubricator and choose a filter-regulator instead. For maintenance, the individual elements are orderable as GAF300-08, GAR300-08 and GAL300-08. The 0.4 MPa ceiling is 44% of the standard type's 0.9 MPa maximum, so verify your actuators can operate within this reduced threshold before committing.
Quick checklist
The lubricator adds an oil mist downstream of the regulator. If any part of the line must stay oil-free, use a filter-regulator instead of an F.R.L. combination on that branch.
This lower-pressure type unit operates at 0.15-0.4 MPa (20-58 psi), with a maximum pressure of 1.0 MPa (145 psi) and a proof pressure of 1.5 MPa (215 psi). It features a 5 um element, a 60 cc drain bowl, a 98 cc oil bowl, and weighs 1300 g. The operating temperature is -5 to 70 C, and it uses ISO VG 32 lubricant.
The N in the code indicates no gauge is supplied, but the body has a 1/8in connection so you can install one separately to read the set pressure. If needed, the three components can be replaced individually using the GAF300-08 filter, GAR300-08 regulator and GAL300-08 lubricator.
T selects NPT port threads, the North American taper pipe standard. Without it the same order code has PT (Rc) ports, and with G it has G (BSPP) ports; body, function and dimensions do not change.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Most standard models are dispatched in 3-5 days.
Most inquiries answered within 7 hours.
Send us the quantity, thread type (PT / G / NPT) and destination. We confirm price, availability and lead time — usually within 7 hours.