
The AirTAC GAC F.R.L. Unit GAC300N08LT is a genuine three-unit F.R.L. combination — a filter, a pressure regulator and a lubricator pre-assembled on one bracket with quick mounting clamps. It has 1/4" ports, a 40 µm filter element and regulates 0.15 - 0.4 MPa (20 - 58 psi).
Delivering cleaned, regulated and lubricated air for downstream pneumatics, this AirTAC unit combines a filter, regulator and lubricator on a single L-shape bracket. It features a 1/4in port, a 40 um element and a lower-pressure type regulating span of 0.15-0.4 MPa (20-58 psi). The build order places the lubricator last so oil mist is introduced downstream of the regulator seat, preventing fouling.
This variant uses a nylon bowl and carries a circular gauge reading MPa/psi for the default NPT thread. Weighing 1300 g, it holds 60 cc of condensate in the drain bowl and 98 cc of oil. The semi-auto and manual drain pair is fitted, and replacement internals are available as GAF300-08, GAR300-08 and GAL300-08. Order code GAC300N08LT has NPT ports (the T in the code) for North American pipe fittings.
| Model | Airtac GAC F.R.L. Unit GAC300N08LT |
|---|---|
| Series | GAC300 F.R.L. combination |
| Port size | 1/4" (NPT thread) |
| Filtering grade | 40 µm |
| Pressure range | 0.15 - 0.4 MPa (20 - 58 psi) |
| Type | Lower pressure |
| Bowl material | Nylon |
| Drain type | Semi-auto drain + manual drain |
| Fluid | Air |
|---|---|
| Max. pressure | 1.0 MPa (145 psi) |
| Proof pressure | 1.5 MPa (215 psi) |
| Temperature range | -5 to +70 °C (unfreeze) |
| Capacity of drain bowl | 60 cc |
| Capacity of oil bowl | 98 cc |
| Recommended lubricant | ISO VG 32 or equivalent |
| Weight | 1300 g |
Specifications follow the official AirTAC GAC catalogue (pages 216-217). Air must not freeze in the unit. The fitted circular gauge reads in psi / bar, set by the NPT thread code.
| GAC300 | GA300 series F.R.L. unit — sets ports, bowl capacity and weight. |
|---|---|
| N | Bowl material: Nylon. Available on this body: PC (blank), Metal (C), Nylon (N). |
| 08 | Port size 1/4". This body offers 08 = 1/4", 10 = 3/8", 15 = 1/2". |
| (blank) | Drain: Semi-auto drain + manual drain. |
| L | Lower pressure type — 0.15 - 0.4 MPa (20 - 58 psi). This body offers Standard (S) or Lower pressure (L). |
| (blank) | Circular pressure gauge fitted. |
| (blank) | Filtering grade 40 µm. |
| T | NPT thread; gauge scale psi / bar. |
| (blank) | No reverse-flow valve. |
Constituent units, orderable separately as spares: GAF300-08 filter, GAR300-08 regulator, GAL300-08 lubricator — all three share this body and port.
Figures are the end of the flow curve plotted in the AirTAC catalogue at 0.7 MPa inlet pressure — a sizing envelope for comparing bodies, not a rated flow. Read the catalogue curve for a real duty point. Outlet pressure falls as flow rises, so size a body with headroom above your peak demand.
| This model | GAC300 · 1/4" · curve to 3000 L/min |
|---|---|
| One size down | GAC200 |
| One size up | GAC400 (curve to 6000 L/min) |
| Build order | Filter → bracket → regulator → lubricator |
Feeds small pneumatic grippers and clamps on electronic assembly lines where actuator forces are kept intentionally low.
Conditions air for low-pressure sealing jaws and film advance cylinders in automated packaging equipment.
Supplies stable, lubricated air to sensitive metering pumps and small valves on laboratory test benches.
Choose this GAC300 body for mid-scale duties, stepping up from the GAC200 which plots to 1750 L/min at 0.7 MPa inlet versus this body's 3000 L/min envelope. The nylon bowl suits standard GA-series environments, while the semi-auto and manual drain pair dumps condensate on pressure drops or on demand. Because the lubricator adds oil mist downstream, select a filter-regulator instead if the line must remain oil-free.
The L type caps at 0.4 MPa, which is 44% of the Standard type's 0.9 MPa ceiling.
Quick checklist
The lubricator adds an oil mist downstream of the regulator. If any part of the line must stay oil-free, use a filter-regulator instead of an F.R.L. combination on that branch.
This lower-pressure unit regulates from 0.15-0.4 MPa (20-58 psi) with a max pressure of 1.0 MPa (145 psi) and a proof pressure of 1.5 MPa (215 psi). It operates from -5 to 70 C, uses a 40 um element, weighs 1300 g, holds 60 cc of condensate and 98 cc of oil, and requires ISO VG 32 lubricant.
The L in the ordering code designates the lower-pressure range, limiting the adjustment to 0.15-0.4 MPa (20-58 psi). If the machinery might ever require an outlet pressure above 0.4 MPa, this is the wrong part and the Standard type should be chosen instead.
T selects NPT port threads, the North American taper pipe standard. Without it the same order code has PT (Rc) ports, and with G it has G (BSPP) ports; body, function and dimensions do not change.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Most standard models are dispatched in 3-5 days.
Most inquiries answered within 7 hours.
Send us the quantity, thread type (PT / G / NPT) and destination. We confirm price, availability and lead time — usually within 7 hours.