
The AirTAC GAC F.R.L. Unit GAC300N08SNWT is a genuine three-unit F.R.L. combination — a filter, a pressure regulator and a lubricator pre-assembled on one bracket with quick mounting clamps. It has 1/4" ports, a 5 µm filter element and regulates 0.15 - 0.9 MPa (20 - 130 psi).
Delivering cleaned, regulated and lubricated air for downstream pneumatics, this AirTAC unit integrates a filter, regulator and lubricator on a single L-shape bracket. The 1/4in ported body carries a 5 um element to trap fine particles before they reach precision valves, operating within a standard pressure range of 0.15-0.9 MPa (20-130 psi). Because the lubricator sits last in the sequence, oil mist is introduced downstream of the regulator seat, preventing fouling of the internal pressure-control mechanisms.
Built with a nylon bowl, the assembly omits the pressure gauge to suit panels where remote monitoring is preferred; a 1/8in gauge connection remains available if one needs to be added later. The 60 cc condensate bowl and 98 cc oil reservoir dictate the maintenance rhythm, requiring periodic attention to keep the air preparation optimal. Weighing 1300 g, this body size is substantial enough to demand a firm panel or frame mount rather than relying on the connected tubing for physical support. Order code GAC300N08SNWT has NPT ports (the T in the code) for North American pipe fittings.
| Model | Airtac GAC F.R.L. Unit GAC300N08SNWT |
|---|---|
| Series | GAC300 F.R.L. combination |
| Port size | 1/4" (NPT thread) |
| Filtering grade | 5 µm |
| Pressure range | 0.15 - 0.9 MPa (20 - 130 psi) |
| Type | Standard |
| Bowl material | Nylon |
| Drain type | Semi-auto drain + manual drain |
| Fluid | Air |
|---|---|
| Max. pressure | 1.0 MPa (145 psi) |
| Proof pressure | 1.5 MPa (215 psi) |
| Temperature range | -5 to +70 °C (unfreeze) |
| Capacity of drain bowl | 60 cc |
| Capacity of oil bowl | 98 cc |
| Recommended lubricant | ISO VG 32 or equivalent |
| Weight | 1300 g |
Specifications follow the official AirTAC GAC catalogue (pages 216-217). Air must not freeze in the unit. No gauge is supplied with this model — the gauge connection on a GAC300 is 1/8" if you add one.
| GAC300 | GA300 series F.R.L. unit — sets ports, bowl capacity and weight. |
|---|---|
| N | Bowl material: Nylon. Available on this body: PC (blank), Metal (C), Nylon (N). |
| 08 | Port size 1/4". This body offers 08 = 1/4", 10 = 3/8", 15 = 1/2". |
| (blank) | Drain: Semi-auto drain + manual drain. |
| S | Standard type — 0.15 - 0.9 MPa (20 - 130 psi). This body offers Standard (S) or Lower pressure (L). |
| N | No pressure gauge; 1/8" gauge connection. |
| W | Filtering grade 5 µm. |
| T | NPT thread; gauge scale psi / bar. |
| (blank) | No reverse-flow valve. |
Constituent units, orderable separately as spares: GAF300-08 filter, GAR300-08 regulator, GAL300-08 lubricator — all three share this body and port.
Figures are the end of the flow curve plotted in the AirTAC catalogue at 0.7 MPa inlet pressure — a sizing envelope for comparing bodies, not a rated flow. Read the catalogue curve for a real duty point. Outlet pressure falls as flow rises, so size a body with headroom above your peak demand.
| This model | GAC300 · 1/4" · curve to 3000 L/min |
|---|---|
| One size down | GAC200 |
| One size up | GAC400 (curve to 6000 L/min) |
| Build order | Filter → bracket → regulator → lubricator |
Supplies finely filtered, lubricated air to pneumatic tool change cylinders, ensuring reliable gripping and release without abrasive dust ingress.
Conditions the supply for high-speed packaging actuators, maintaining steady pressure for consistent film sealing and cutting motions.
Protects sensitive proportional valves in wire forming equipment by stripping 5 um particulates from the compressed air stream.
Choose this GAC300 configuration for mid-size pneumatic duties requiring fine 5 um filtration, where the 1/4in port matches the flow requirements of your actuators. The nylon bowl offers a lightweight alternative to metal or PC variants, while the semi-auto and manual drain pairing gives operators dual control over condensate evacuation. If your machine layout requires oil-free air downstream, you must omit the lubricator and select a dedicated filter-regulator instead of this combination. Should a component fail, the assembly breaks down into separately orderable spares: GAF300-08, GAR300-08 and GAL300-08. Stepping up to the GAC400 body increases the plotted flow envelope from 3000 L/min to 6000 L/min at 0.7 MPa inlet, effectively doubling the available air capacity. Keep in mind that the 1.5 MPa (215 psi) proof pressure provides a 1.5x burst-test margin over the 1.0 MPa maximum, which is a safety rating rather than permission to operate above the stated limit.
Quick checklist
The lubricator adds an oil mist downstream of the regulator. If any part of the line must stay oil-free, use a filter-regulator instead of an F.R.L. combination on that branch.
This model operates at 0.15-0.9 MPa (20-130 psi) with a maximum pressure of 1.0 MPa (145 psi) and a proof pressure of 1.5 MPa (215 psi). The temperature range is -5 to 70 C. It features a 60 cc drain bowl, a 98 cc oil bowl, a 5 um element, and weighs 1300 g. The recommended lubricant is ISO VG 32 or equivalent.
The N in the ordering code indicates that no circular gauge is supplied, meaning the set pressure cannot be read directly from the unit. However, the body includes a 1/8in gauge connection, allowing you to install a separate gauge if downstream pressure verification becomes necessary.
T selects NPT port threads, the North American taper pipe standard. Without it the same order code has PT (Rc) ports, and with G it has G (BSPP) ports; body, function and dimensions do not change.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Most standard models are dispatched in 3-5 days.
Most inquiries answered within 7 hours.
Send us the quantity, thread type (PT / G / NPT) and destination. We confirm price, availability and lead time — usually within 7 hours.