
The AirTAC GAC F.R.L. Unit GAC300N08SWT is a genuine three-unit F.R.L. combination — a filter, a pressure regulator and a lubricator pre-assembled on one bracket with quick mounting clamps. It has 1/4" ports, a 5 µm filter element and regulates 0.15 - 0.9 MPa (20 - 130 psi).
Delivering cleaned, regulated and lubricated air for pneumatic systems, the AirTAC GAC300N08SWT is a complete F.R.L. combination comprising a filter, regulator and lubricator pre-plumbed on a single L-shape bracket. This 1/4in port model features a 5 um element for trapping fine particles, making it well-suited for protecting precision valves and instrument air circuits. The standard type regulates pressure across a 0.15-0.9 MPa (20-130 psi) range, and a circular gauge is fitted to read the set pressure in MPa/psi.
The unit uses a nylon bowl and includes a semi-auto drain alongside a manual drain, giving operators two ways to clear the 60 cc condensate sump. Weighing 1300 g, the assembly is held together by quick mounting clamps, which eliminates inter-unit tubing and simplifies installation. Oil mist is introduced downstream of the regulator, ensuring the regulator seat stays clean, while the 98 cc oil bowl sets the lubrication refill interval.
To choose the right configuration, compare this GAC300 body with neighbouring sizes: its catalogue flow curve is plotted to 3000 L/min at 0.7 MPa inlet, whereas the smaller GAC200 plots to 1750 L/min and the larger GAC400 reaches 6000 L/min. This model uses a 5 um element instead of the standard 40 um, trading finer filtration for more frequent element service. If the downstream line must remain oil-free, omit the lubricator and choose a filter-regulator instead. The three constituent parts are separately orderable as GAF300-08, GAR300-08 and GAL300-08. Because the maximum supply is 1.0 MPa and the standard type regulates to 0.9 MPa, there is only about 0.1 MPa of headroom above the top setting, so plan a supply near 1.0 MPa if you truly need 0.9 MPa out. This version has NPT ports (the T in the order code) for North American pipe fittings.
| Model | Airtac GAC F.R.L. Unit GAC300N08SWT |
|---|---|
| Series | GAC300 F.R.L. combination |
| Port size | 1/4" (NPT thread) |
| Filtering grade | 5 µm |
| Pressure range | 0.15 - 0.9 MPa (20 - 130 psi) |
| Type | Standard |
| Bowl material | Nylon |
| Drain type | Semi-auto drain + manual drain |
| Fluid | Air |
|---|---|
| Max. pressure | 1.0 MPa (145 psi) |
| Proof pressure | 1.5 MPa (215 psi) |
| Temperature range | -5 to +70 °C (unfreeze) |
| Capacity of drain bowl | 60 cc |
| Capacity of oil bowl | 98 cc |
| Recommended lubricant | ISO VG 32 or equivalent |
| Weight | 1300 g |
Specifications follow the official AirTAC GAC catalogue (pages 216-217). Air must not freeze in the unit. The fitted circular gauge reads in psi / bar, set by the NPT thread code.
| GAC300 | GA300 series F.R.L. unit — sets ports, bowl capacity and weight. |
|---|---|
| N | Bowl material: Nylon. Available on this body: PC (blank), Metal (C), Nylon (N). |
| 08 | Port size 1/4". This body offers 08 = 1/4", 10 = 3/8", 15 = 1/2". |
| (blank) | Drain: Semi-auto drain + manual drain. |
| S | Standard type — 0.15 - 0.9 MPa (20 - 130 psi). This body offers Standard (S) or Lower pressure (L). |
| (blank) | Circular pressure gauge fitted. |
| W | Filtering grade 5 µm. |
| T | NPT thread; gauge scale psi / bar. |
| (blank) | No reverse-flow valve. |
Constituent units, orderable separately as spares: GAF300-08 filter, GAR300-08 regulator, GAL300-08 lubricator — all three share this body and port.
Figures are the end of the flow curve plotted in the AirTAC catalogue at 0.7 MPa inlet pressure — a sizing envelope for comparing bodies, not a rated flow. Read the catalogue curve for a real duty point. Outlet pressure falls as flow rises, so size a body with headroom above your peak demand.
| This model | GAC300 · 1/4" · curve to 3000 L/min |
|---|---|
| One size down | GAC200 |
| One size up | GAC400 (curve to 6000 L/min) |
| Build order | Filter → bracket → regulator → lubricator |
Feeds sensitive directional control valves in small CNC machinery, relying on the 5 um element to prevent spool sticking.
Conditions supply for delicate laboratory air actuators, using the 1/4in port and standard pressure range for steady operation.
Supplies clean, regulated air to pneumatic gauging equipment, where fine filtration ensures accurate dimensional readings.
To choose the right configuration, compare this GAC300 body with neighbouring sizes: its catalogue flow curve is plotted to 3000 L/min at 0.7 MPa inlet, whereas the smaller GAC200 plots to 1750 L/min and the larger GAC400 reaches 6000 L/min. This model uses a 5 um element instead of the standard 40 um, trading finer filtration for more frequent element service. If the downstream line must remain oil-free, omit the lubricator and choose a filter-regulator instead. The three constituent parts are separately orderable as GAF300-08, GAR300-08 and GAL300-08. Because the maximum supply is 1.0 MPa and the standard type regulates to 0.9 MPa, there is only about 0.1 MPa of headroom above the top setting, so plan a supply near 1.0 MPa if you truly need 0.9 MPa out.
Quick checklist
The lubricator adds an oil mist downstream of the regulator. If any part of the line must stay oil-free, use a filter-regulator instead of an F.R.L. combination on that branch.
The standard type operates at 0.15-0.9 MPa (20-130 psi) with a max pressure of 1.0 MPa (145 psi) and a proof pressure of 1.5 MPa (215 psi). The temperature range is -5 to 70 C, the drain bowl holds 60 cc, the oil bowl holds 98 cc, the recommended lubricant is ISO VG 32, and the unit weighs 1300 g.
It has a nylon bowl and ships with both a semi-auto drain and a manual drain fitted. The semi-auto dumps condensate on each pressure drop, while the manual operates on demand, giving operators dual control over the 60 cc sump.
T selects NPT port threads, the North American taper pipe standard. Without it the same order code has PT (Rc) ports, and with G it has G (BSPP) ports; body, function and dimensions do not change.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Most standard models are dispatched in 3-5 days.
Most inquiries answered within 7 hours.
Send us the quantity, thread type (PT / G / NPT) and destination. We confirm price, availability and lead time — usually within 7 hours.