
The AirTAC GAC F.R.L. Unit GAC300N08SWTK is a genuine three-unit F.R.L. combination — a filter, a pressure regulator and a lubricator pre-assembled on one bracket with quick mounting clamps. It has 1/4" ports, a 5 µm filter element and regulates 0.15 - 0.9 MPa (20 - 130 psi).
Delivering cleaned, regulated and lubricated air for pneumatic machinery, this GAC300N08SWTK assembly integrates a filter, regulator and lubricator on a single L-shape bracket. The 1/4in port feeds a standard pressure range of 0.15-0.9 MPa (20-130 psi). Because the 5 um element sits upstream of the regulation stage, precision valves receive highly refined air while the regulator seat stays clear of coarse debris.
The nylon bowl equips this unit for environments where polycarbonate might be unsuitable, while the fitted circular gauge reads in MPa/psi for the default NPT thread. A reverse-flow (reflux) valve is fitted, appearing as a separate pneumatic symbol in the catalogue. Condensate is managed by a semi-auto and manual drain pair, and the 60 cc drain bowl plus 98 cc oil capacity dictate the routine service interval.
| Model | Airtac GAC F.R.L. Unit GAC300N08SWTK |
|---|---|
| Series | GAC300 F.R.L. combination |
| Port size | 1/4" (NPT thread) |
| Filtering grade | 5 µm |
| Pressure range | 0.15 - 0.9 MPa (20 - 130 psi) |
| Type | Standard |
| Bowl material | Nylon |
| Drain type | Semi-auto drain + manual drain |
| Fluid | Air |
|---|---|
| Max. pressure | 1.0 MPa (145 psi) |
| Proof pressure | 1.5 MPa (215 psi) |
| Temperature range | -5 to +70 °C (unfreeze) |
| Capacity of drain bowl | 60 cc |
| Capacity of oil bowl | 98 cc |
| Recommended lubricant | ISO VG 32 or equivalent |
| Weight | 1300 g |
Specifications follow the official AirTAC GAC catalogue (pages 216-217). Air must not freeze in the unit. The fitted circular gauge reads in psi / bar, set by the NPT thread code.
| GAC300 | GA300 series F.R.L. unit — sets ports, bowl capacity and weight. |
|---|---|
| N | Bowl material: Nylon. Available on this body: PC (blank), Metal (C), Nylon (N). |
| 08 | Port size 1/4". This body offers 08 = 1/4", 10 = 3/8", 15 = 1/2". |
| (blank) | Drain: Semi-auto drain + manual drain. |
| S | Standard type — 0.15 - 0.9 MPa (20 - 130 psi). This body offers Standard (S) or Lower pressure (L). |
| (blank) | Circular pressure gauge fitted. |
| W | Filtering grade 5 µm. |
| T | NPT thread; gauge scale psi / bar. |
| K | Reverse-flow (reflux) valve attached. |
Constituent units, orderable separately as spares: GAF300-08 filter, GAR300-08 regulator, GAL300-08 lubricator — all three share this body and port.
Figures are the end of the flow curve plotted in the AirTAC catalogue at 0.7 MPa inlet pressure — a sizing envelope for comparing bodies, not a rated flow. Read the catalogue curve for a real duty point. Outlet pressure falls as flow rises, so size a body with headroom above your peak demand.
| This model | GAC300 · 1/4" · curve to 3000 L/min |
|---|---|
| One size down | GAC200 |
| One size up | GAC400 (curve to 6000 L/min) |
| Build order | Filter → bracket → regulator → lubricator |
Feeds sensitive directional control valves in small CNC machinery where the 5 um element prevents sticking and premature wear.
Conditions air for small pneumatic grippers and capping heads, ensuring consistent actuation speeds across the packaging cycle.
Supplies clean, regulated air to analytical instruments and sample handling actuators that require a stable 1/4in pneumatic feed.
Choose this 1300 g assembly when a machine demands fine 5 um filtration alongside standard 0.15-0.9 MPa (20-130 psi) regulation. The flow curve for the GAC300 is plotted to 3000 L/min at 0.7 MPa inlet, offering a sizing envelope that sits neatly below the 6000 L/min limit of the GAC400 body. If your downstream line must remain completely free of oil, omit the lubricator and select a dedicated filter-regulator instead. Should a component fail, order the individual GAF300-08, GAR300-08 or GAL300-08 spares rather than replacing the whole bracket. The 1.5 MPa (215 psi) proof pressure provides a 1.5x burst-test margin above the 1.0 MPa maximum, but this is strictly a safety rating and never permission to operate above 1.0 MPa (145 psi).
Quick checklist
The lubricator adds an oil mist downstream of the regulator. If any part of the line must stay oil-free, use a filter-regulator instead of an F.R.L. combination on that branch.
This standard type unit regulates from 0.15-0.9 MPa (20-130 psi) with a maximum pressure of 1.0 MPa (145 psi) and a 1.5 MPa (215 psi) proof pressure. It operates from -5 to 70 C, weighs 1300 g, and features a 60 cc drain bowl alongside a 98 cc oil bowl. The recommended lubricant is ISO VG 32.
The K indicates that a reverse-flow (reflux) valve is attached. The official catalogue shows this as a distinct pneumatic symbol on its own page; the unit also carries a 5 um nylon-bowl configuration with a NPT thread and a fitted gauge.
T selects NPT port threads, the North American taper pipe standard. Without it the same order code has PT (Rc) ports, and with G it has G (BSPP) ports; body, function and dimensions do not change.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Most standard models are dispatched in 3-5 days.
Most inquiries answered within 7 hours.
Send us the quantity, thread type (PT / G / NPT) and destination. We confirm price, availability and lead time — usually within 7 hours.