Airtac GAF Filter GAF200N06A
The AirTAC Airtac GAF Filter GAF200N06A is a genuine compressed-air filter. Its diversion structure spins the air to separate liquid water and trap solid particles down to 40 µm, protecting downstream valves and tools. It has 1/8" ports and a 25 cc drain bowl. It is a filter only — it does not regulate or set pressure.
- TypeAir filter
- Port size1/8"
- Filtering grade40 µm
- Pressure range0.15 - 0.9 MPa
- Bowl materialNylon
- Drainautomatic
- Drain bowl25 cc
- Weight200 g
- No minimum order. A single piece can be ordered.
- Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
About the Airtac GAF Filter GAF200N06A
The GAF200N06A is a genuine AirTAC air filter that spins incoming air to throw liquid water and solid particles into its 25 cc nylon drain bowl, then traps fine grain in the 40 um HDPE core. It is a filter only - it cleans the air but has no regulator, no pressure gauge and no adjusting knob.
This 1/8in-port model weighs 200 g and is rated for 0.15-0.9 MPa (20-130 psi) working pressure with a 1.5 MPa (215 psi) proof pressure. The automatic drain clears condensate without manual attention, making it a fit-and-forget choice for a compact machine or a single pneumatic valve.
Airtac GAF Filter GAF200N06A Technical Specifications
| Model | Airtac GAF Filter GAF200N06A |
|---|---|
| Series | GAF200 air filter |
| Port size | 1/8" (PT thread) |
| Filtering grade | 40 µm |
| Pressure range | 0.15 - 0.9 MPa (20 - 130 psi) |
| Bowl material | Nylon |
| Drain type | Automatic drain |
| Bracket | Included |
| Fluid | Air |
|---|---|
| Proof pressure | 1.5 MPa (215 psi) |
| Temperature range | -5 to +70 °C (unfreeze) |
| Capacity of drain bowl | 25 cc |
| Element | HDPE filter core |
| Weight | 200 g |
Specifications follow the official AirTAC GAF catalogue (pages 225-226). Air must not freeze in the unit. This is a filter only — it separates water and solid particles but does not set or hold a downstream pressure. To regulate pressure as well, use the matching GAFR200 filter-regulator.
Model Code: Airtac GAF Filter GAF200N06A
| GAF200 | GA200 series air filter — sets the port range, drain-bowl capacity and weight. |
|---|---|
| N | Bowl material: Nylon. Available on this body: PC (blank), Metal (C), Nylon (N). |
| 06 | Port size 1/8". This body offers 06 = 1/8", 08 = 1/4". |
| A | Drain: Automatic drain. |
| (blank) | Mounting bracket included. |
| (blank) | Filtering grade 40 µm. |
| (blank) | PT port thread. |
A GAF has no regulator and no pressure gauge — there is no type, gauge or reflux code. Need to regulate pressure too? The matching GAFR200-06 is the same filter with a built-in regulator.
Size Class & Flow Envelope
- GAF2001/8"-1/4" · 3000 L/min
- GAF3001/4"-1/2" · 6000 L/min
- GAF4003/8"-1/2" · 8000 L/min
- GAF5003/4" · 9000 L/min
- GAF6003/4"-1" · 12000 L/min
Figures are the end of the flow curve plotted in the AirTAC catalogue — a sizing envelope for comparing bodies, not a rated flow. Read the catalogue curve for a real duty point. A filter this size drops less pressure at flow than the same-body GAFR filter-regulator, so match it to your peak demand.
| This model | GAF200 · 1/8" · curve to 3000 L/min |
|---|---|
| One size up | GAF300 (curve to 6000 L/min) |
| Add regulation | GAFR200-06 (filter + regulator) |
Where the Airtac GAF Filter GAF200N06A Is Used
Protect a single precision valve
Mount the GAF200N06A ahead of one small solenoid valve or a precision pilot on a benchtop fixture. The 40 um element and automatic drain keep water and rust flakes out of the valve's internal passages, reducing sticking and extending service life.
Compact pneumatic tool feed
Use this 1/8in filter on a small air tool or a short branch line feeding a hand-operated fixture. Its 200 g body mounts directly to the panel, and the automatic drain handles condensate without you stopping to open a manual petcock.
Lab air line pre-filter
Install the GAF200N06A on a laboratory air line that feeds a small analytical device or a test jig. The 40 um element removes water droplets and solid particles from the supply, protecting sensitive components while the nylon bowl gives a clear view of collected liquid.
Is the Airtac GAF Filter GAF200N06A the Right Filter?
Choose the GAF200N06A when your line is 1/8in and you want the nylon bowl for a build where you prefer that material - the common specification is identical across PC, nylon and metal bowls, so confirm compatibility for aggressive surroundings. The A code gives you the automatic drain, ideal for wet or unattended lines, while the included mounting bracket lets you fix the 200 g body to a panel instead of supporting it from the tubing. The 40 um element suits general-purpose protection; step up to a W code for 5 um filtration if you feed precision valves. Port thread is PT, so match your fittings to that standard. If you also need a set pressure, use the matching GAFR200-06 filter-regulator instead, because this unit does not regulate. The 25 cc drain bowl holds about 2.4x less condensate than the GAF300's 60 cc bowl, so plan more frequent draining on this smaller body.
Quick checklist
- ✓ Body size for your peak flow (1/8" here)
- ✓ Element 40 µm (general) or 5 µm (fine)
- ✓ Bowl material: PC (blank), Metal (C), Nylon (N)
- ✓ Drain: semi-auto + manual, or automatic
- ✓ Bracket kept or removed (J)
- ✓ Need pressure control too? Use GAFR200
Installation & Maintenance Notes
- check Install with the airflow arrow: IN to OUT, bowl accessible.
- check Place the filter FIRST in the air-prep train, ahead of any regulator or lubricator.
- check Keep pressure at or below the 1.5 MPa (215 psi) proof limit.
- check Drain condensate before the 25 cc bowl fills.
- check Keep the unit above freezing (-5 to +70 °C, unfreeze).
- check Support the 200 g unit on its bracket, not on the tubing.
This is a filter only — it removes water and solid particles but adds no pressure control and no lubrication. Add a GAR regulator, a GAL lubricator, or step up to the GAFR200-06 filter-regulator as your air-prep needs grow.
Airtac GAF Filter GAF200N06A FAQ
The GAF200N06A is a filter-only unit with a 1/8in PT port, a 40 um HDPE filter element, and a 25 cc nylon drain bowl. It weighs 200 g and has a flow curve plotted to 3000 L/min. Working pressure is 0.15-0.9 MPa (20-130 psi), proof pressure is 1.5 MPa (215 psi), and temperature range is -5 to 70 C. The automatic drain clears condensate without manual operation, and the mounting bracket is included.
The A code means the GAF200N06A has an automatic drain that expels collected condensate from the 25 cc bowl without manual intervention. Choose it for wet supply lines or installations where an operator cannot regularly check the bowl, such as a remote machine station. A blank drain code would ship with both semi-auto and manual drains for periodic operator action.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models are processed and dispatched in 3-5 business days.
Fast Reply
Most inquiries answered within 7-8 hours.
Related AirTAC Air-Preparation Units
Request a Quote for Airtac GAF Filter GAF200N06A
Send us the quantity, thread type (PT / G / NPT) and destination. We confirm price, stock and lead time — usually within 7-8 hours.