Airtac GAF Filter GAF200N06AJW
The AirTAC Airtac GAF Filter GAF200N06AJW is a genuine compressed-air filter. Its diversion structure spins the air to separate liquid water and trap solid particles down to 5 µm, protecting downstream valves and tools. It has 1/8" ports and a 25 cc drain bowl. It is a filter only — it does not regulate or set pressure.
- TypeAir filter
- Port size1/8"
- Filtering grade5 µm
- Pressure range0.15 - 0.9 MPa
- Bowl materialNylon
- Drainautomatic
- Drain bowl25 cc
- Weight200 g
- No minimum order. A single piece can be ordered.
- Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
About the Airtac GAF Filter GAF200N06AJW
The GAF200N06AJW is a compact air filter that spins incoming air to throw liquid water and solid particles into its 25 cc nylon bowl, while the 5 um HDPE element traps fine grain. This unit cleans the air only; it has no regulator, no pressure gauge, and no lubricator.
With a 1/8in PT port and 200 g mass, this filter suits small jigs or a single valve. The automatic drain clears condensate without attention, and the nylon bowl offers an alternative build for your environment. The rated working range is 0.15-0.9 MPa (20-130 psi) from -5 to 70 C.
Airtac GAF Filter GAF200N06AJW Technical Specifications
| Model | Airtac GAF Filter GAF200N06AJW |
|---|---|
| Series | GAF200 air filter |
| Port size | 1/8" (PT thread) |
| Filtering grade | 5 µm |
| Pressure range | 0.15 - 0.9 MPa (20 - 130 psi) |
| Bowl material | Nylon |
| Drain type | Automatic drain |
| Bracket | Not included (J) |
| Fluid | Air |
|---|---|
| Proof pressure | 1.5 MPa (215 psi) |
| Temperature range | -5 to +70 °C (unfreeze) |
| Capacity of drain bowl | 25 cc |
| Element | HDPE filter core |
| Weight | 200 g |
Specifications follow the official AirTAC GAF catalogue (pages 225-226). Air must not freeze in the unit. This is a filter only — it separates water and solid particles but does not set or hold a downstream pressure. To regulate pressure as well, use the matching GAFR200 filter-regulator.
Model Code: Airtac GAF Filter GAF200N06AJW
| GAF200 | GA200 series air filter — sets the port range, drain-bowl capacity and weight. |
|---|---|
| N | Bowl material: Nylon. Available on this body: PC (blank), Metal (C), Nylon (N). |
| 06 | Port size 1/8". This body offers 06 = 1/8", 08 = 1/4". |
| A | Drain: Automatic drain. |
| J | No bracket (J) — supplied without the mounting bracket. |
| W | Filtering grade 5 µm. |
| (blank) | PT port thread. |
A GAF has no regulator and no pressure gauge — there is no type, gauge or reflux code. Need to regulate pressure too? The matching GAFR200-06 is the same filter with a built-in regulator.
Size Class & Flow Envelope
- GAF2001/8"-1/4" · 3000 L/min
- GAF3001/4"-1/2" · 6000 L/min
- GAF4003/8"-1/2" · 8000 L/min
- GAF5003/4" · 9000 L/min
- GAF6003/4"-1" · 12000 L/min
Figures are the end of the flow curve plotted in the AirTAC catalogue — a sizing envelope for comparing bodies, not a rated flow. Read the catalogue curve for a real duty point. A filter this size drops less pressure at flow than the same-body GAFR filter-regulator, so match it to your peak demand.
| This model | GAF200 · 1/8" · curve to 3000 L/min |
|---|---|
| One size up | GAF300 (curve to 6000 L/min) |
| Add regulation | GAFR200-06 (filter + regulator) |
Where the Airtac GAF Filter GAF200N06AJW Is Used
Protect a single valve
Mount this 1/8in filter ahead of one solenoid valve on a small fixture. The 5 um element keeps fine particles from sticking in the valve pilot, and the automatic drain handles condensate without a visit.
Small bench tool
Feed a pneumatic hand tool on a workbench with clean, dry air. The compact 200 g body mounts directly to the tool inlet or a nearby panel, and the nylon bowl resists the occasional knock.
Instrument air prefilter
Use this filter before a sensitive pressure switch or sensor on a test rig. The 5 um element traps fine grain that could skew readings, while the automatic drain keeps the bowl from filling during long tests.
Is the Airtac GAF Filter GAF200N06AJW the Right Filter?
Choose the GAF200 body for 1/8in or 1/4in ports where space is tight; the next step up is the GAF300 with a 60 cc bowl and a 6000 L/min curve for heavier lines. The nylon bowl is a material choice, not a performance upgrade, so confirm compatibility with your surroundings. This model has the automatic drain for wet or unattended lines, omits the bracket for panel mounting, and uses the 5 um element for finer filtration. The PT thread standard must match your fittings. If you also need a set pressure, use the matching GAFR200-06 filter-regulator instead. The 1.5 MPa proof pressure gives a 1.67x margin over the 0.9 MPa top of the working range.
Quick checklist
- ✓ Body size for your peak flow (1/8" here)
- ✓ Element 40 µm (general) or 5 µm (fine)
- ✓ Bowl material: PC (blank), Metal (C), Nylon (N)
- ✓ Drain: semi-auto + manual, or automatic
- ✓ Bracket kept or removed (J)
- ✓ Need pressure control too? Use GAFR200
Installation & Maintenance Notes
- check Install with the airflow arrow: IN to OUT, bowl accessible.
- check Place the filter FIRST in the air-prep train, ahead of any regulator or lubricator.
- check Keep pressure at or below the 1.5 MPa (215 psi) proof limit.
- check Drain condensate before the 25 cc bowl fills.
- check Keep the unit above freezing (-5 to +70 °C, unfreeze).
- check Support the 200 g unit on its bracket, not on the tubing.
This is a filter only — it removes water and solid particles but adds no pressure control and no lubrication. Add a GAR regulator, a GAL lubricator, or step up to the GAFR200-06 filter-regulator as your air-prep needs grow.
Airtac GAF Filter GAF200N06AJW FAQ
This AirTAC filter has a 1/8in port, 5 um filtering grade, and a 25 cc drain bowl. It weighs 200 g and the flow curve is plotted to 3000 L/min. The working pressure range is 0.15-0.9 MPa (20-130 psi), proof pressure is 1.5 MPa (215 psi), and temperature range is -5 to 70 C. The bowl is nylon and the drain is automatic.
The A code means an automatic drain that expels condensate by itself, ideal for wet lines or unattended operation. The J code omits the mounting bracket, so you can panel-mount the filter or use an existing bracket. This model also has a nylon bowl and a 5 um element.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models are processed and dispatched in 3-5 business days.
Fast Reply
Most inquiries answered within 7-8 hours.
Related AirTAC Air-Preparation Units
Request a Quote for Airtac GAF Filter GAF200N06AJW
Send us the quantity, thread type (PT / G / NPT) and destination. We confirm price, stock and lead time — usually within 7-8 hours.