Airtac GAF Filter GAF30010JW
The AirTAC Airtac GAF Filter GAF30010JW is a genuine compressed-air filter. Its diversion structure spins the air to separate liquid water and trap solid particles down to 5 µm, protecting downstream valves and tools. It has 3/8" ports and a 60 cc drain bowl. It is a filter only — it does not regulate or set pressure.
- TypeAir filter
- Port size3/8"
- Filtering grade5 µm
- Pressure range0.15 - 0.9 MPa
- Bowl materialPC
- Drainsemi-auto + manual
- Drain bowl60 cc
- Weight360 g
- No minimum order. A single piece can be ordered.
- Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
About the Airtac GAF Filter GAF30010JW
The GAF30010JW is a genuine AirTAC air filter that removes water and solid particles from compressed air lines. Its diversion structure spins incoming air to throw liquid and debris into the 60 cc drain bowl, while the 5 um HDPE element traps fine grain. This unit is a filter only, with no regulator or pressure gauge.
This model has a 3/8in port and weighs 360 g, placing it in the mid-size GAF300 class. The PC bowl and included semi-auto plus manual drains make it a straightforward choice for general shop air. Because the bracket is omitted (J code), plan for a panel mount or an existing bracket to support the unit.
Airtac GAF Filter GAF30010JW Technical Specifications
| Model | Airtac GAF Filter GAF30010JW |
|---|---|
| Series | GAF300 air filter |
| Port size | 3/8" (PT thread) |
| Filtering grade | 5 µm |
| Pressure range | 0.15 - 0.9 MPa (20 - 130 psi) |
| Bowl material | PC |
| Drain type | Semi-auto drain + manual drain |
| Bracket | Not included (J) |
| Fluid | Air |
|---|---|
| Proof pressure | 1.5 MPa (215 psi) |
| Temperature range | -5 to +70 °C (unfreeze) |
| Capacity of drain bowl | 60 cc |
| Element | HDPE filter core |
| Weight | 360 g |
Specifications follow the official AirTAC GAF catalogue (pages 225-226). Air must not freeze in the unit. This is a filter only — it separates water and solid particles but does not set or hold a downstream pressure. To regulate pressure as well, use the matching GAFR300 filter-regulator.
Model Code: Airtac GAF Filter GAF30010JW
| GAF300 | GA300 series air filter — sets the port range, drain-bowl capacity and weight. |
|---|---|
| (blank) | Bowl material: PC. Available on this body: PC (blank), Metal (C), Nylon (N). |
| 10 | Port size 3/8". This body offers 08 = 1/4", 10 = 3/8", 15 = 1/2". |
| (blank) | Drain: Semi-auto drain + manual drain. |
| J | No bracket (J) — supplied without the mounting bracket. |
| W | Filtering grade 5 µm. |
| (blank) | PT port thread. |
A GAF has no regulator and no pressure gauge — there is no type, gauge or reflux code. Need to regulate pressure too? The matching GAFR300-10 is the same filter with a built-in regulator.
Size Class & Flow Envelope
- GAF2001/8"-1/4" · 3000 L/min
- GAF3001/4"-1/2" · 6000 L/min
- GAF4003/8"-1/2" · 8000 L/min
- GAF5003/4" · 9000 L/min
- GAF6003/4"-1" · 12000 L/min
Figures are the end of the flow curve plotted in the AirTAC catalogue — a sizing envelope for comparing bodies, not a rated flow. Read the catalogue curve for a real duty point. A filter this size drops less pressure at flow than the same-body GAFR filter-regulator, so match it to your peak demand.
| This model | GAF300 · 3/8" · curve to 6000 L/min |
|---|---|
| One size down | GAF200 |
| One size up | GAF400 (curve to 8000 L/min) |
| Add regulation | GAFR300-10 (filter + regulator) |
Where the Airtac GAF Filter GAF30010JW Is Used
Precision Valve Protection
Feed a bank of precision pneumatic valves on a small assembly machine. The 5 um element stops fine abrasive grain that could cause spool sticking or premature wear.
Instrument Air Pre-Filter
Use before sensitive instrumentation or gauges in a test rig. The fine 5 um filtration and 60 cc bowl handle moderate condensate loads without frequent attention.
Pneumatic Tool Feed
Protect air tools on a workbench from water and rust scale. The semi-auto drain lets you manually purge the 60 cc bowl at shift end, keeping tools dry.
Is the Airtac GAF Filter GAF30010JW the Right Filter?
Choose the GAF300 body when you need a 3/8in port with a 60 cc drain bowl, a step up from the GAF200's 25 cc bowl. The PC bowl suits standard industrial environments; confirm compatibility for aggressive surroundings. This unit ships with both semi-auto and manual drains, so you can drain manually or let the semi-auto function work. The J code means no mounting bracket is included, so use a panel mount or existing bracket. The 5 um element (W) traps finer particles than the standard 40 um, ideal for precision valves. The PT thread standard matches common local fittings. If you also need pressure control, the matching GAFR300-10 adds a regulator. The GAF300's 6000 L/min flow envelope is 2x the GAF200's 3000 L/min, showing its larger capacity for bigger lines.
Quick checklist
- ✓ Body size for your peak flow (3/8" here)
- ✓ Element 40 µm (general) or 5 µm (fine)
- ✓ Bowl material: PC (blank), Metal (C), Nylon (N)
- ✓ Drain: semi-auto + manual, or automatic
- ✓ Bracket kept or removed (J)
- ✓ Need pressure control too? Use GAFR300
Installation & Maintenance Notes
- check Install with the airflow arrow: IN to OUT, bowl accessible.
- check Place the filter FIRST in the air-prep train, ahead of any regulator or lubricator.
- check Keep pressure at or below the 1.5 MPa (215 psi) proof limit.
- check Drain condensate before the 60 cc bowl fills.
- check Keep the unit above freezing (-5 to +70 °C, unfreeze).
- check Support the 360 g unit on its bracket, not on the tubing.
This is a filter only — it removes water and solid particles but adds no pressure control and no lubrication. Add a GAR regulator, a GAL lubricator, or step up to the GAFR300-10 filter-regulator as your air-prep needs grow.
Airtac GAF Filter GAF30010JW FAQ
The GAF30010JW is a filter only with a 5 um HDPE element. Working pressure range is 0.15-0.9 MPa (20-130 psi), proof pressure is 1.5 MPa (215 psi), and temperature range is -5 to 70 C. The drain bowl holds 60 cc and the unit weighs 360 g. The flow curve is plotted to 6000 L/min.
The J in the model code means the mounting bracket is omitted. This is for installations where you already have a panel mount, a machine frame, or an existing bracket. The unit still needs proper support given its 360 g weight; do not support it from the tubing alone.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models are processed and dispatched in 3-5 business days.
Fast Reply
Most inquiries answered within 7-8 hours.
Related AirTAC Air-Preparation Units
Request a Quote for Airtac GAF Filter GAF30010JW
Send us the quantity, thread type (PT / G / NPT) and destination. We confirm price, stock and lead time — usually within 7-8 hours.