Airtac GAF Filter GAF300N15JW
The AirTAC Airtac GAF Filter GAF300N15JW is a genuine compressed-air filter. Its diversion structure spins the air to separate liquid water and trap solid particles down to 5 µm, protecting downstream valves and tools. It has 1/2" ports and a 60 cc drain bowl. It is a filter only — it does not regulate or set pressure.
- TypeAir filter
- Port size1/2"
- Filtering grade5 µm
- Pressure range0.15 - 0.9 MPa
- Bowl materialNylon
- Drainsemi-auto + manual
- Drain bowl60 cc
- Weight360 g
- No minimum order. A single piece can be ordered.
- Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
About the Airtac GAF Filter GAF300N15JW
The GAF300N15JW is a genuine AirTAC air filter that spins incoming air to throw liquid water and solid particles into its 60 cc drain bowl, while the 5 um HDPE core traps fine grain. This 1/2in-port unit weighs 360 g and is built for the 300 size class, with a nylon bowl and no mounting bracket.
This filter-only device has no regulator, no pressure gauge and no lubricator - it cleans the air but does not control pressure. With a 5 um element it suits precision valves or instrument air, and the semi-auto plus manual drain gives you both automatic condensate release and a manual backup for servicing.
Airtac GAF Filter GAF300N15JW Technical Specifications
| Model | Airtac GAF Filter GAF300N15JW |
|---|---|
| Series | GAF300 air filter |
| Port size | 1/2" (PT thread) |
| Filtering grade | 5 µm |
| Pressure range | 0.15 - 0.9 MPa (20 - 130 psi) |
| Bowl material | Nylon |
| Drain type | Semi-auto drain + manual drain |
| Bracket | Not included (J) |
| Fluid | Air |
|---|---|
| Proof pressure | 1.5 MPa (215 psi) |
| Temperature range | -5 to +70 °C (unfreeze) |
| Capacity of drain bowl | 60 cc |
| Element | HDPE filter core |
| Weight | 360 g |
Specifications follow the official AirTAC GAF catalogue (pages 225-226). Air must not freeze in the unit. This is a filter only — it separates water and solid particles but does not set or hold a downstream pressure. To regulate pressure as well, use the matching GAFR300 filter-regulator.
Model Code: Airtac GAF Filter GAF300N15JW
| GAF300 | GA300 series air filter — sets the port range, drain-bowl capacity and weight. |
|---|---|
| N | Bowl material: Nylon. Available on this body: PC (blank), Metal (C), Nylon (N). |
| 15 | Port size 1/2". This body offers 08 = 1/4", 10 = 3/8", 15 = 1/2". |
| (blank) | Drain: Semi-auto drain + manual drain. |
| J | No bracket (J) — supplied without the mounting bracket. |
| W | Filtering grade 5 µm. |
| (blank) | PT port thread. |
A GAF has no regulator and no pressure gauge — there is no type, gauge or reflux code. Need to regulate pressure too? The matching GAFR300-15 is the same filter with a built-in regulator.
Size Class & Flow Envelope
- GAF2001/8"-1/4" · 3000 L/min
- GAF3001/4"-1/2" · 6000 L/min
- GAF4003/8"-1/2" · 8000 L/min
- GAF5003/4" · 9000 L/min
- GAF6003/4"-1" · 12000 L/min
Figures are the end of the flow curve plotted in the AirTAC catalogue — a sizing envelope for comparing bodies, not a rated flow. Read the catalogue curve for a real duty point. A filter this size drops less pressure at flow than the same-body GAFR filter-regulator, so match it to your peak demand.
| This model | GAF300 · 1/2" · curve to 6000 L/min |
|---|---|
| One size down | GAF200 |
| One size up | GAF400 (curve to 8000 L/min) |
| Add regulation | GAFR300-15 (filter + regulator) |
Where the Airtac GAF Filter GAF300N15JW Is Used
Precision valve protection
Feed a bank of precision pneumatic valves on a small assembly machine. The 5 um element stops fine grain that could clog valve pilots, while the 60 cc bowl handles typical shift-long condensate.
Instrument air pre-filter
Protect sensitive instruments or gauges on a test bench. The 5 um HDPE core removes water and solids before they reach the instrument, and the semi-auto drain keeps the bowl from overflowing during long runs.
Single-station machine feed
Supply a single-station pneumatic press or a dedicated work cell. The 1/2in port and 360 g body fit neatly into a compact line, and the curve to 6000 L/min gives ample envelope for one or two actuators.
Is the Airtac GAF Filter GAF300N15JW the Right Filter?
Choose the GAF300N15JW when you need a 1/2in-port filter in the 300 size class, which is a step up from the GAF200's 1/4in port and 25 cc bowl, and a step down from the GAF400's 3/8in-1/2in ports and 100 cc bowl. The nylon bowl is a build choice - confirm compatibility for aggressive surroundings since no chemical data is printed. The J code means no bracket is included, so plan for panel mounting or an existing bracket. The 5 um element traps far finer particles than the standard 40 um, at the cost of more frequent element service. The PT thread standard must match your fittings. If you also need a set pressure, use the matching GAFR300-15 filter-regulator instead. The GAF300's 60 cc drain bowl holds 2.4x the condensate of the GAF200's 25 cc bowl.
Quick checklist
- ✓ Body size for your peak flow (1/2" here)
- ✓ Element 40 µm (general) or 5 µm (fine)
- ✓ Bowl material: PC (blank), Metal (C), Nylon (N)
- ✓ Drain: semi-auto + manual, or automatic
- ✓ Bracket kept or removed (J)
- ✓ Need pressure control too? Use GAFR300
Installation & Maintenance Notes
- check Install with the airflow arrow: IN to OUT, bowl accessible.
- check Place the filter FIRST in the air-prep train, ahead of any regulator or lubricator.
- check Keep pressure at or below the 1.5 MPa (215 psi) proof limit.
- check Drain condensate before the 60 cc bowl fills.
- check Keep the unit above freezing (-5 to +70 °C, unfreeze).
- check Support the 360 g unit on its bracket, not on the tubing.
This is a filter only — it removes water and solid particles but adds no pressure control and no lubrication. Add a GAR regulator, a GAL lubricator, or step up to the GAFR300-15 filter-regulator as your air-prep needs grow.
Airtac GAF Filter GAF300N15JW FAQ
The GAF300N15JW is a filter-only unit with a 5 um filtering grade, a working pressure range of 0.15-0.9 MPa (20-130 psi), a proof pressure of 1.5 MPa (215 psi), and a temperature range of -5 to 70 C. It has a 60 cc drain bowl and weighs 360 g, with a flow curve plotted to 6000 L/min.
The J code means the mounting bracket is NOT included with the GAF300N15JW. You will need to provide your own panel mount or use an existing bracket. The filter itself has a nylon bowl, a 5 um element, and a semi-auto plus manual drain.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models are processed and dispatched in 3-5 business days.
Fast Reply
Most inquiries answered within 7-8 hours.
Related AirTAC Air-Preparation Units
Request a Quote for Airtac GAF Filter GAF300N15JW
Send us the quantity, thread type (PT / G / NPT) and destination. We confirm price, stock and lead time — usually within 7-8 hours.