Airtac GAFC Air Service Unit GAFC30015SNWK
The AirTAC Airtac GAFC Air Service Unit GAFC30015SNWK is a genuine two-piece F.R.L. combination — a GA-series filter & regulator and a lubricator pre-assembled on one T-shape bracket with quick mounting clamps. It has 1/2" ports, a 5 µm filter element and regulates 0.15 - 0.9 MPa (20 - 130 psi).
- TypeF.R.L. combination
- Port size1/2"
- Pressure range0.15 - 0.9 MPa (20 - 130 psi)
- Filtering grade5 µm
- Bowl materialPC
- Drainsemi-auto + manual
- Pressure gaugeNot fitted
- Weight1020 g
- No minimum order. A single piece can be ordered.
- Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
About the Airtac GAFC Air Service Unit GAFC30015SNWK
This GAFC30015SNWK is a two-piece F.R.L. combination: the filter and regulator share one body, and a lubricator is mounted on the same T-bracket. Air is cleaned and set to pressure in the first unit, then the lubricator adds a metered oil mist downstream, so oil never travels back through the regulator seat. With a 1/2in port and a 1020 g mass, it suits a machine zone rather than a single small cylinder.
The standard pressure range is 0.15-0.9 MPa (20-130 psi), and the 5 um element traps fine particles for sensitive valves. The 60 cc condensate bowl and 98 cc oil bowl set the service rhythm, while the semi-auto drain (which dumps on pressure drop) and manual drain are both fitted. No gauge is supplied, so the 1/8in gauge connection is left for a later addition, and the reverse-flow (reflux) valve is included.
Airtac GAFC Air Service Unit GAFC30015SNWK Technical Specifications
| Model | Airtac GAFC Air Service Unit GAFC30015SNWK |
|---|---|
| Series | GAFC300 F.R.L. combination |
| Port size | 1/2" (PT thread) |
| Filtering grade | 5 µm |
| Pressure range | 0.15 - 0.9 MPa (20 - 130 psi) |
| Type | Standard |
| Bowl material | PC |
| Drain type | Semi-auto drain + manual drain |
| Fluid | Air |
|---|---|
| Max. pressure | 1.0 MPa (145 psi) |
| Proof pressure | 1.5 MPa (215 psi) |
| Temperature range | -5 to +70 °C (unfreeze) |
| Capacity of drain bowl | 60 cc |
| Capacity of oil bowl | 98 cc |
| Recommended lubricant | ISO VG 32 or equivalent |
| Weight | 1020 g |
Specifications follow the official AirTAC GAFC catalogue (pages 219-220). Air must not freeze in the unit. No gauge is supplied with this model — the gauge connection on a GAFC300 is 1/8" if you add one.
Model Code: Airtac GAFC Air Service Unit GAFC30015SNWK
| GAFC300 | GA300 series F.R.L. unit — sets ports, bowl capacity and weight. |
|---|---|
| (blank) | Bowl material: PC. Available on this body: PC (blank), Metal (C), Nylon (N). |
| 15 | Port size 1/2". This body offers 08 = 1/4", 10 = 3/8", 15 = 1/2". |
| (blank) | Drain: Semi-auto drain + manual drain. |
| S | Standard type — 0.15 - 0.9 MPa (20 - 130 psi). This body offers Standard (S) or Lower pressure (L). |
| N | No pressure gauge; 1/8" gauge connection. |
| W | Filtering grade 5 µm. |
| (blank) | PT thread; gauge scale MPa / psi. |
| K | Reverse-flow (reflux) valve attached. |
Constituent units, orderable separately as spares: GAFR300-15 filter & regulator, GAL300-15 lubricator — both share this body and port. A GAFC has two units, not three: the filter and the regulator are one body.
Size Class & Flow Envelope
- GAFC2001/8"-1/4" · 1750 L/min
- GAFC3001/4"-1/2" · 3500 L/min
- GAFC4003/8"-1/2" · 6000 L/min
- GAFC5003/4" · 7000 L/min
- GAFC6003/4"-1" · 12000 L/min
Figures are the end of the flow curve plotted in the AirTAC catalogue at 0.7 MPa inlet pressure — a sizing envelope for comparing bodies, not a rated flow. Read the catalogue curve for a real duty point. Outlet pressure falls as flow rises, so size a body with headroom above your peak demand.
| This model | GAFC300 · 1/2" · curve to 3500 L/min |
|---|---|
| One size down | GAFC200 |
| One size up | GAFC400 (curve to 6000 L/min) |
| Build order | Filter & regulator → bracket → lubricator |
Where the Airtac GAFC Air Service Unit GAFC30015SNWK Is Used
Precision valve control
Feed a bank of fine pneumatic valves on a packaging line where the 5 um element protects sensitive internal clearances from abrasive particles.
Conveyor zone air
Supply a 1/2in header that runs several air cylinders on a short conveyor section, with the 60 cc bowl handling typical condensate between shifts.
Machine tool lubrication
Add controlled oil mist to a drilling fixture's slide ways, where the 98 cc oil bowl supports a full shift before a refill is needed.
Is the Airtac GAFC Air Service Unit GAFC30015SNWK the Right Air-Prep Unit?
Choose this GAFC30015SNWK when a 1/2in port and the 3500 L/min plotted flow envelope (at 0.7 MPa inlet) fit your line, and where the 5 um element is worth the more frequent service it demands. The PC bowl is the standard build; confirm it suits your environment, since the catalogue gives no material-specific ratings. The semi-auto and manual drains are both fitted, so condensate is handled on pressure drops or on demand. The K code adds the reverse-flow (reflux) valve, which the catalogue draws as a separate pneumatic symbol. If the line must stay oil-free, omit the lubricator and select a plain GAFR300-15 filter-regulator instead; otherwise the spares are GAFR300-15 and GAL300-15, both with the same body-port suffix.
With a 1.0 MPa max supply, there is only about 0.1 MPa of headroom above the 0.9 MPa top of the regulated range, so plan the inlet pressure carefully if you need to run near the ceiling.
Quick checklist
- ✓ Body size for your peak flow (1/2" here)
- ✓ Standard 0.9 MPa or lower-pressure 0.4 MPa
- ✓ Bowl material: PC (blank), Metal (C), Nylon (N)
- ✓ Drain: semi-auto + manual, or automatic
- ✓ Element 40 µm or 5 µm
- ✓ Thread & gauge scale (PT / G / NPT)
Installation & Maintenance Notes
- check Install with the airflow arrow: filter-regulator first, lubricator last.
- check Keep inlet pressure at or below 1.0 MPa (145 psi).
- check Fill the oil bowl with ISO VG 32 or equivalent only.
- check Drain condensate before the 60 cc bowl fills.
- check Keep the unit above freezing (-5 to +70 °C, unfreeze).
- check Support the 1020 g unit on its bracket, not on the tubing.
The lubricator adds an oil mist downstream of the regulator. If any part of the line must stay oil-free, use a plain GAFR300-15 filter-regulator on that branch instead of the full combination.
Airtac GAFC Air Service Unit GAFC30015SNWK FAQ
It operates on air at 0.15-0.9 MPa (20-130 psi), with a max pressure of 1.0 MPa (145 psi) and a proof pressure of 1.5 MPa (215 psi). The temperature range is -5 to 70 C, and it must not freeze. It has a 60 cc drain bowl and a 98 cc oil bowl, weighs 1020 g, and the recommended lubricant is ISO VG 32 or equivalent.
The N after the port code means no gauge is supplied with this unit. If you need to read the set pressure, you can add a gauge to the 1/8in gauge connection on the GAFC300 body. The thread is PT, so a gauge with an MPa/psi scale would match the standard port thread.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models are processed and dispatched in 3-5 business days.
Fast Reply
Most inquiries answered within 7-8 hours.
Related AirTAC Air-Preparation Units
Request a Quote for Airtac GAFC Air Service Unit GAFC30015SNWK
Send us the quantity, thread type (PT / G / NPT) and destination. We confirm price, stock and lead time — usually within 7-8 hours.