Airtac GAFC Air Service Unit GAFC600C20ASNK
The AirTAC Airtac GAFC Air Service Unit GAFC600C20ASNK is a genuine two-piece F.R.L. combination — a GA-series filter & regulator and a lubricator pre-assembled on one T-shape bracket with quick mounting clamps. It has 3/4" ports, a 40 µm filter element and regulates 0.15 - 0.9 MPa (20 - 130 psi).
- TypeF.R.L. combination
- Port size3/4"
- Pressure range0.15 - 0.9 MPa (20 - 130 psi)
- Filtering grade40 µm
- Bowl materialMetal
- Drainautomatic
- Pressure gaugeNot fitted
- Weight3430 g
- No minimum order. A single piece can be ordered.
- Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
About the Airtac GAFC Air Service Unit GAFC600C20ASNK
This GAFC600C20ASNK is a two-piece F.R.L. combination built for heavy plant air: a filter-regulator body handles filtration and pressure setting, then a lubricator adds metered oil mist downstream. The 3/4in port and 3430 g mass place it at the top of the GAFC range, sized for machine headers and multi-station lines rather than individual actuators.
The metal bowl is specified by the C code, and the automatic drain clears condensate without an operator. It regulates from 0.15 to 0.9 MPa (20-130 psi) with a 40 um element, and the reverse-flow valve is fitted. The catalogue flow curve is plotted to 12000 L/min at 0.7 MPa inlet, which is a sizing envelope rather than a rated capacity.
Airtac GAFC Air Service Unit GAFC600C20ASNK Technical Specifications
| Model | Airtac GAFC Air Service Unit GAFC600C20ASNK |
|---|---|
| Series | GAFC600 F.R.L. combination |
| Port size | 3/4" (PT thread) |
| Filtering grade | 40 µm |
| Pressure range | 0.15 - 0.9 MPa (20 - 130 psi) |
| Type | Standard |
| Bowl material | Metal |
| Drain type | Automatic drain |
| Fluid | Air |
|---|---|
| Max. pressure | 1.0 MPa (145 psi) |
| Proof pressure | 1.5 MPa (215 psi) |
| Temperature range | -5 to +70 °C (unfreeze) |
| Capacity of drain bowl | 205 cc |
| Capacity of oil bowl | 410 cc |
| Recommended lubricant | ISO VG 32 or equivalent |
| Weight | 3430 g |
Specifications follow the official AirTAC GAFC catalogue (pages 219-220). Air must not freeze in the unit. No gauge is supplied with this model — the gauge connection on a GAFC600 is 1/4" if you add one.
Model Code: Airtac GAFC Air Service Unit GAFC600C20ASNK
| GAFC600 | GA600 series F.R.L. unit — sets ports, bowl capacity and weight. |
|---|---|
| C | Bowl material: Metal. Available on this body: Metal (C) only. |
| 20 | Port size 3/4". This body offers 20 = 3/4", 25 = 1". |
| A | Drain: Automatic drain. |
| S | Standard type — 0.15 - 0.9 MPa (20 - 130 psi). This body offers Standard (S) only. |
| N | No pressure gauge; 1/4" gauge connection. |
| (blank) | Filtering grade 40 µm. |
| (blank) | PT thread; gauge scale MPa / psi. |
| K | Reverse-flow (reflux) valve attached. |
Constituent units, orderable separately as spares: GAFR600-20 filter & regulator, GAL600-20 lubricator — both share this body and port. A GAFC has two units, not three: the filter and the regulator are one body.
Size Class & Flow Envelope
- GAFC2001/8"-1/4" · 1750 L/min
- GAFC3001/4"-1/2" · 3500 L/min
- GAFC4003/8"-1/2" · 6000 L/min
- GAFC5003/4" · 7000 L/min
- GAFC6003/4"-1" · 12000 L/min
Figures are the end of the flow curve plotted in the AirTAC catalogue at 0.7 MPa inlet pressure — a sizing envelope for comparing bodies, not a rated flow. Read the catalogue curve for a real duty point. Outlet pressure falls as flow rises, so size a body with headroom above your peak demand.
| This model | GAFC600 · 3/4" · curve to 12000 L/min |
|---|---|
| One size down | GAFC500 |
| Build order | Filter & regulator → bracket → lubricator |
Where the Airtac GAFC Air Service Unit GAFC600C20ASNK Is Used
Machine header supply
Feed a multi-station assembly machine header where several actuators draw from one 3/4in line, with the automatic drain handling condensate from continuous operation.
Press lubrication
Supply a stamping press clutch and brake circuit where the lubricator adds ISO VG 32 oil mist to protect downstream valves, while the regulator holds a stable setpoint.
Test rig air prep
Prepare air for a hydraulic test bench's pneumatic clamping system, where the 205 cc bowl reduces how often an operator must check condensate levels.
Is the Airtac GAFC Air Service Unit GAFC600C20ASNK the Right Air-Prep Unit?
Choose the GAFC600 when a 3/4in port and 205 cc condensate bowl plus 410 cc oil bowl match your line's service interval. The metal bowl is a build choice, and the common specification of 1.0 MPa max and -5 to 70 C applies regardless of material, so confirm it suits your environment. The automatic drain suits unattended operation, and the no-gauge version leaves a 1/4in connection if you add one later. The PT thread carries an MPa/psi scale, and the 40 um element is the standard grade. Spares are orderable as GAFR600-20 and GAL600-20. The 1.0 MPa max supply leaves about 0.1 MPa above the 0.9 MPa top of the regulated range.
Quick checklist
- ✓ Body size for your peak flow (3/4" here)
- ✓ Standard 0.9 MPa or lower-pressure 0.4 MPa
- ✓ Bowl material: Metal (C) only
- ✓ Drain: semi-auto + manual, or automatic
- ✓ Element 40 µm or 5 µm
- ✓ Thread & gauge scale (PT / G / NPT)
Installation & Maintenance Notes
- check Install with the airflow arrow: filter-regulator first, lubricator last.
- check Keep inlet pressure at or below 1.0 MPa (145 psi).
- check Fill the oil bowl with ISO VG 32 or equivalent only.
- check Drain condensate before the 205 cc bowl fills.
- check Keep the unit above freezing (-5 to +70 °C, unfreeze).
- check Support the 3430 g unit on its bracket, not on the tubing.
The lubricator adds an oil mist downstream of the regulator. If any part of the line must stay oil-free, use a plain GAFR600-20 filter-regulator on that branch instead of the full combination.
Airtac GAFC Air Service Unit GAFC600C20ASNK FAQ
It operates from 0.15 to 0.9 MPa (20-130 psi) with a 1.0 MPa (145 psi) maximum and 1.5 MPa (215 psi) proof pressure. Temperature range is -5 to 70 C, and it uses ISO VG 32 oil. The drain bowl holds 205 cc, the oil bowl holds 410 cc, and the unit weighs 3430 g.
The K indicates a reverse-flow (reflux) valve is fitted. The catalogue shows it as a separate pneumatic symbol, and it is an ordering difference from a standard GAFC600. The unit also has no gauge, leaving a 1/4in connection if you want to add one.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models are processed and dispatched in 3-5 business days.
Fast Reply
Most inquiries answered within 7-8 hours.
Related AirTAC Air-Preparation Units
Request a Quote for Airtac GAFC Air Service Unit GAFC600C20ASNK
Send us the quantity, thread type (PT / G / NPT) and destination. We confirm price, stock and lead time — usually within 7-8 hours.