Airtac GAFC Air Service Unit GAFC600C20ASNWK
The AirTAC Airtac GAFC Air Service Unit GAFC600C20ASNWK is a genuine two-piece F.R.L. combination — a GA-series filter & regulator and a lubricator pre-assembled on one T-shape bracket with quick mounting clamps. It has 3/4" ports, a 5 µm filter element and regulates 0.15 - 0.9 MPa (20 - 130 psi).
- TypeF.R.L. combination
- Port size3/4"
- Pressure range0.15 - 0.9 MPa (20 - 130 psi)
- Filtering grade5 µm
- Bowl materialMetal
- Drainautomatic
- Pressure gaugeNot fitted
- Weight3430 g
- No minimum order. A single piece can be ordered.
- Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
About the Airtac GAFC Air Service Unit GAFC600C20ASNWK
This GAFC600 F.R.L. combination pairs a filter-regulator body with a lubricator on a single T-bracket, so the air is cleaned, set to pressure, then given a metered oil mist in the last stage. With a 3/4in port and a 3430 g mass, it belongs to the largest GAFC size class and needs a proper panel or frame mount rather than support from the tubing. The 5 um element traps fine particles for sensitive downstream equipment, while the metal bowl and automatic drain suit a permanent installation where regular attendance is not planned.
The standard pressure range is 0.15-0.9 MPa (20-130 psi), with a 1.0 MPa (145 psi) maximum and 1.5 MPa (215 psi) proof pressure. The 205 cc condensate bowl and 410 cc oil bowl are both metal, and the unit must not freeze, so keep it above -5 to 70 C. No gauge is supplied with this model; the 1/4in gauge connection is there if you add one later. The reverse-flow (reflux) valve is fitted as part of this build.
Airtac GAFC Air Service Unit GAFC600C20ASNWK Technical Specifications
| Model | Airtac GAFC Air Service Unit GAFC600C20ASNWK |
|---|---|
| Series | GAFC600 F.R.L. combination |
| Port size | 3/4" (PT thread) |
| Filtering grade | 5 µm |
| Pressure range | 0.15 - 0.9 MPa (20 - 130 psi) |
| Type | Standard |
| Bowl material | Metal |
| Drain type | Automatic drain |
| Fluid | Air |
|---|---|
| Max. pressure | 1.0 MPa (145 psi) |
| Proof pressure | 1.5 MPa (215 psi) |
| Temperature range | -5 to +70 °C (unfreeze) |
| Capacity of drain bowl | 205 cc |
| Capacity of oil bowl | 410 cc |
| Recommended lubricant | ISO VG 32 or equivalent |
| Weight | 3430 g |
Specifications follow the official AirTAC GAFC catalogue (pages 219-220). Air must not freeze in the unit. No gauge is supplied with this model — the gauge connection on a GAFC600 is 1/4" if you add one.
Model Code: Airtac GAFC Air Service Unit GAFC600C20ASNWK
| GAFC600 | GA600 series F.R.L. unit — sets ports, bowl capacity and weight. |
|---|---|
| C | Bowl material: Metal. Available on this body: Metal (C) only. |
| 20 | Port size 3/4". This body offers 20 = 3/4", 25 = 1". |
| A | Drain: Automatic drain. |
| S | Standard type — 0.15 - 0.9 MPa (20 - 130 psi). This body offers Standard (S) only. |
| N | No pressure gauge; 1/4" gauge connection. |
| W | Filtering grade 5 µm. |
| (blank) | PT thread; gauge scale MPa / psi. |
| K | Reverse-flow (reflux) valve attached. |
Constituent units, orderable separately as spares: GAFR600-20 filter & regulator, GAL600-20 lubricator — both share this body and port. A GAFC has two units, not three: the filter and the regulator are one body.
Size Class & Flow Envelope
- GAFC2001/8"-1/4" · 1750 L/min
- GAFC3001/4"-1/2" · 3500 L/min
- GAFC4003/8"-1/2" · 6000 L/min
- GAFC5003/4" · 7000 L/min
- GAFC6003/4"-1" · 12000 L/min
Figures are the end of the flow curve plotted in the AirTAC catalogue at 0.7 MPa inlet pressure — a sizing envelope for comparing bodies, not a rated flow. Read the catalogue curve for a real duty point. Outlet pressure falls as flow rises, so size a body with headroom above your peak demand.
| This model | GAFC600 · 3/4" · curve to 12000 L/min |
|---|---|
| One size down | GAFC500 |
| Build order | Filter & regulator → bracket → lubricator |
Where the Airtac GAFC Air Service Unit GAFC600C20ASNWK Is Used
Machine tool coolant systems
Feed a 3/4in header supplying coolant valves and cylinders on a CNC lathe or machining center, where the 5 um element protects precision spool valves from fine swarf.
Multi-station assembly lines
Supply a bank of pneumatic actuators on a pallet conveyor with regulated, lubricated air, and let the automatic drain handle condensate from a humid plant air supply.
Packaging film tensioning
Run the tensioning cylinders on a high-speed film wrapper from this unit, using the 0.15-0.9 MPa range to set a stable web tension and the oil mist to keep rod seals wetted.
Is the Airtac GAFC Air Service Unit GAFC600C20ASNWK the Right Air-Prep Unit?
The GAFC600 is the top of the GAFC range, offered only with a metal bowl and standard pressure type. The 3/4in port feeds a machine header or multi-station line, and the catalogue flow curve is plotted to 12000 L/min at 0.7 MPa inlet, so size the downstream piping for that envelope. The automatic drain clears condensate without an operator, which suits a line that runs unattended or in a wet environment. The 5 um element gives finer filtration than the standard 40 um, but expect to service it more often. The PT thread comes with a gauge scale in MPa/psi, though no gauge is fitted here - the 1/4in connection is ready for one. The reverse-flow valve is present, and the two units are orderable separately as GAFR600-20 and GAL600-20, so a damaged bowl or clogged element does not mean replacing the whole assembly. If the line must stay oil-free, choose a plain GAFR filter-regulator instead of this lubricated set. The 205 cc drain bowl holds about 8x the condensate of the GAFC200's 25 cc, so this large body is attended far less often.
Quick checklist
- ✓ Body size for your peak flow (3/4" here)
- ✓ Standard 0.9 MPa or lower-pressure 0.4 MPa
- ✓ Bowl material: Metal (C) only
- ✓ Drain: semi-auto + manual, or automatic
- ✓ Element 40 µm or 5 µm
- ✓ Thread & gauge scale (PT / G / NPT)
Installation & Maintenance Notes
- check Install with the airflow arrow: filter-regulator first, lubricator last.
- check Keep inlet pressure at or below 1.0 MPa (145 psi).
- check Fill the oil bowl with ISO VG 32 or equivalent only.
- check Drain condensate before the 205 cc bowl fills.
- check Keep the unit above freezing (-5 to +70 °C, unfreeze).
- check Support the 3430 g unit on its bracket, not on the tubing.
The lubricator adds an oil mist downstream of the regulator. If any part of the line must stay oil-free, use a plain GAFR600-20 filter-regulator on that branch instead of the full combination.
Airtac GAFC Air Service Unit GAFC600C20ASNWK FAQ
This F.R.L. combination works with air only. The standard pressure range is 0.15-0.9 MPa (20-130 psi), with a maximum pressure of 1.0 MPa (145 psi) and a proof pressure of 1.5 MPa (215 psi). Operating temperature is -5 to 70 C and it must not freeze. The drain bowl holds 205 cc and the oil bowl 410 cc. Recommended lubricant is ISO VG 32. The complete unit weighs 3430 g.
The N in the code after the port means no gauge is supplied with this unit. The GAFC600 body has a 1/4in gauge connection, so you can fit a circular gauge there later if you need to read the set pressure. The PT thread on this model would use a gauge scale in MPa/psi.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models are processed and dispatched in 3-5 business days.
Fast Reply
Most inquiries answered within 7-8 hours.
Related AirTAC Air-Preparation Units
Request a Quote for Airtac GAFC Air Service Unit GAFC600C20ASNWK
Send us the quantity, thread type (PT / G / NPT) and destination. We confirm price, stock and lead time — usually within 7-8 hours.