Airtac GAFC Air Service Unit GAFC600C25ASWK
The AirTAC Airtac GAFC Air Service Unit GAFC600C25ASWK is a genuine two-piece F.R.L. combination — a GA-series filter & regulator and a lubricator pre-assembled on one T-shape bracket with quick mounting clamps. It has 1" ports, a 5 µm filter element and regulates 0.15 - 0.9 MPa (20 - 130 psi).
- TypeF.R.L. combination
- Port size1"
- Pressure range0.15 - 0.9 MPa (20 - 130 psi)
- Filtering grade5 µm
- Bowl materialMetal
- Drainautomatic
- Pressure gaugeCircular, MPa / psi
- Weight3430 g
- No minimum order. A single piece can be ordered.
- Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
About the Airtac GAFC Air Service Unit GAFC600C25ASWK
This AirTAC GAFC600C25ASWK is a two-piece F.R.L. combination sized for a 1 inch line. The first body houses both the filter and the regulator, so air is cleaned and set to pressure in one step, then the lubricator adds a metered oil mist downstream. It carries a 5 um element and an automatic drain, with a metal bowl protecting the 205 cc condensate chamber and 410 cc oil reservoir.
Weighing 3430 g, this is the largest GAFC body and belongs on a machine header or a multi-station line, not hanging from plastic tubing. The standard pressure range is 0.15-0.9 MPa (20-130 psi), with a circular gauge fitted that reads in MPa and psi. A reverse-flow valve is included, and the whole assembly mounts on a T-bracket with quick clamps.
Airtac GAFC Air Service Unit GAFC600C25ASWK Technical Specifications
| Model | Airtac GAFC Air Service Unit GAFC600C25ASWK |
|---|---|
| Series | GAFC600 F.R.L. combination |
| Port size | 1" (PT thread) |
| Filtering grade | 5 µm |
| Pressure range | 0.15 - 0.9 MPa (20 - 130 psi) |
| Type | Standard |
| Bowl material | Metal |
| Drain type | Automatic drain |
| Fluid | Air |
|---|---|
| Max. pressure | 1.0 MPa (145 psi) |
| Proof pressure | 1.5 MPa (215 psi) |
| Temperature range | -5 to +70 °C (unfreeze) |
| Capacity of drain bowl | 205 cc |
| Capacity of oil bowl | 410 cc |
| Recommended lubricant | ISO VG 32 or equivalent |
| Weight | 3430 g |
Specifications follow the official AirTAC GAFC catalogue (pages 219-220). Air must not freeze in the unit. The fitted circular gauge reads in MPa / psi, set by the PT thread code.
Model Code: Airtac GAFC Air Service Unit GAFC600C25ASWK
| GAFC600 | GA600 series F.R.L. unit — sets ports, bowl capacity and weight. |
|---|---|
| C | Bowl material: Metal. Available on this body: Metal (C) only. |
| 25 | Port size 1". This body offers 20 = 3/4", 25 = 1". |
| A | Drain: Automatic drain. |
| S | Standard type — 0.15 - 0.9 MPa (20 - 130 psi). This body offers Standard (S) only. |
| (blank) | Circular pressure gauge fitted. |
| W | Filtering grade 5 µm. |
| (blank) | PT thread; gauge scale MPa / psi. |
| K | Reverse-flow (reflux) valve attached. |
Constituent units, orderable separately as spares: GAFR600-25 filter & regulator, GAL600-25 lubricator — both share this body and port. A GAFC has two units, not three: the filter and the regulator are one body.
Size Class & Flow Envelope
- GAFC2001/8"-1/4" · 1750 L/min
- GAFC3001/4"-1/2" · 3500 L/min
- GAFC4003/8"-1/2" · 6000 L/min
- GAFC5003/4" · 7000 L/min
- GAFC6003/4"-1" · 12000 L/min
Figures are the end of the flow curve plotted in the AirTAC catalogue at 0.7 MPa inlet pressure — a sizing envelope for comparing bodies, not a rated flow. Read the catalogue curve for a real duty point. Outlet pressure falls as flow rises, so size a body with headroom above your peak demand.
| This model | GAFC600 · 1" · curve to 12000 L/min |
|---|---|
| One size down | GAFC500 |
| Build order | Filter & regulator → bracket → lubricator |
Where the Airtac GAFC Air Service Unit GAFC600C25ASWK Is Used
Machine tool header
Feed a 1 inch header on a CNC machining center, supplying filtered and regulated air to multiple cylinders and tool changers with a single service point.
Multi-station assembly line
Protect a long conveyor system with several actuators, where the 205 cc drain bowl and 410 cc oil reservoir extend the interval between maintenance rounds.
Packaging line air prep
Condition air for a high-speed cartoning machine, using the 5 um element to keep fine particulates away from precision valves and sensors.
Is the Airtac GAFC Air Service Unit GAFC600C25ASWK the Right Air-Prep Unit?
Choose the GAFC600 when a 1 inch port and the 205 cc drain bowl justify fewer service stops on a busy line. The metal bowl is a build choice, not a performance upgrade; the shared specification of 1.0 MPa max and -5 to 70 C applies regardless, so confirm it suits your environment. The automatic drain clears condensate without an operator, and the 5 um element traps finer particles than the standard 40 um, though it will need more frequent attention. The PT thread brings a gauge scale in MPa and psi, and the K code adds the reverse-flow valve. Spares are the GAFR600-25 filter-regulator and the GAL600-25 lubricator, both orderable separately. The 1.0 MPa max supply leaves about 0.1 MPa above the 0.9 MPa top of the regulated range.
Quick checklist
- ✓ Body size for your peak flow (1" here)
- ✓ Standard 0.9 MPa or lower-pressure 0.4 MPa
- ✓ Bowl material: Metal (C) only
- ✓ Drain: semi-auto + manual, or automatic
- ✓ Element 40 µm or 5 µm
- ✓ Thread & gauge scale (PT / G / NPT)
Installation & Maintenance Notes
- check Install with the airflow arrow: filter-regulator first, lubricator last.
- check Keep inlet pressure at or below 1.0 MPa (145 psi).
- check Fill the oil bowl with ISO VG 32 or equivalent only.
- check Drain condensate before the 205 cc bowl fills.
- check Keep the unit above freezing (-5 to +70 °C, unfreeze).
- check Support the 3430 g unit on its bracket, not on the tubing.
The lubricator adds an oil mist downstream of the regulator. If any part of the line must stay oil-free, use a plain GAFR600-25 filter-regulator on that branch instead of the full combination.
Airtac GAFC Air Service Unit GAFC600C25ASWK FAQ
This F.R.L. combination operates on air from 0.15 to 0.9 MPa (20-130 psi), with a maximum pressure of 1.0 MPa (145 psi) and a proof pressure of 1.5 MPa (215 psi). The temperature range is -5 to 70 C, and the recommended lubricant is ISO VG 32. It has a 205 cc drain bowl and a 410 cc oil bowl, weighs 3430 g, and the flow curve is plotted to 12000 L/min at 0.7 MPa inlet.
The C code specifies a metal bowl, which is a build choice for the GAFC600 body; the catalogue lists no performance difference between bowl materials, so confirm it fits your environment. The K code means a reverse-flow valve is fitted, shown as a separate symbol in the catalogue. Both options are part of the ordering code and do not change the pressure range or flow envelope.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models are processed and dispatched in 3-5 business days.
Fast Reply
Most inquiries answered within 7-8 hours.
Related AirTAC Air-Preparation Units
Request a Quote for Airtac GAFC Air Service Unit GAFC600C25ASWK
Send us the quantity, thread type (PT / G / NPT) and destination. We confirm price, stock and lead time — usually within 7-8 hours.