
The AirTAC GAFR Adjustable Filter Regulator GAFR20008ALNT is a genuine two-in-one filter & regulator — a diversion-type water/particulate filter and a balanced pressure regulator built into ONE body. It has 1/4" ports, a 40 µm filter element and regulates 0.15 - 0.4 MPa (20 - 58 psi). It has no lubricator, so it adds no oil to the airflow.
The GAFR20008ALNT is a filter and regulator combined into a single body, eliminating the need for separate GAF and GAR units. It handles 1/4in ports and delivers a lower pressure range of 0.15-0.4 MPa (20-58 psi) with a 40 um filter element.
This compact 290 g unit features an automatic drain and a 25 cc condensate bowl. The integrated design reduces potential leak points and saves valuable rail space compared to a two-piece setup. This version has NPT ports (the T in the order code) for North American pipe fittings.
| Model | Airtac GAFR Adjustable Filter Regulator GAFR20008ALNT |
|---|---|
| Series | GAFR200 filter & regulator |
| Port size | 1/4" (NPT thread) |
| Filtering grade | 40 µm |
| Pressure range | 0.15 - 0.4 MPa (20 - 58 psi) |
| Type | Lower pressure |
| Bowl material | PC |
| Drain type | Automatic drain |
| Fluid | Air |
|---|---|
| Max. pressure | 1.0 MPa (145 psi) |
| Proof pressure | 1.5 MPa (215 psi) |
| Temperature range | -5 to +70 °C (unfreeze) |
| Capacity of drain bowl | 25 cc |
| Bracket | Included |
| Weight | 290 g |
Specifications follow the official AirTAC GAFR catalogue (pages 235-236). Air must not freeze in the unit. No gauge is supplied with this model — the gauge connection on a GAFR200 is 1/8" if you add one. This unit filters and regulates only; it does not add lubrication.
| GAFR200 | GA200 series filter & regulator — sets the port range, drain-bowl capacity and weight. |
|---|---|
| (blank) | Bowl material: PC. Available on this body: PC (blank), Metal (C), Nylon (N). |
| 08 | Port size 1/4". This body offers 06 = 1/8", 08 = 1/4". |
| A | Drain: Automatic drain. |
| L | Lower pressure type — 0.15 - 0.4 MPa (20 - 58 psi). This body offers Standard (S) or Lower pressure (L). |
| (blank) | Mounting bracket included. |
| N | No pressure gauge; 1/8" gauge connection. |
| (blank) | Filtering grade 40 µm. |
| T | NPT thread; gauge scale psi / bar. |
| (blank) | No reverse-flow valve. |
The filter and the regulator are ONE body here — there is no separate GAF filter or GAR regulator part to assemble. Need lubrication downstream too? Add a lubricator by ordering the matching GAFC200-08 F.R.L. combination instead.
Figures are the end of the flow curve plotted in the AirTAC catalogue at 0.7 MPa inlet pressure — a sizing envelope for comparing bodies, not a rated flow. Read the catalogue curve for a real duty point. Outlet pressure falls as flow rises, so size a body with headroom above your peak demand.
| This model | GAFR200 · 1/4" · curve to 2000 L/min |
|---|---|
| One size up | GAFR300 (curve to 3500 L/min) |
| Add a lubricator | GAFC200-08 (F.R.L. combination) |
Feed a single precision fixture or a small indexing table that requires a stable, lower pressure supply. The compact body fits tight machine envelopes.
Supply a bench-mounted press or a small pneumatic clamp where a lower pressure setting protects delicate workpieces from excessive force.
Provide filtered, regulated air to a laboratory test jig or a small analytical instrument that needs a controlled pressure below 0.4 MPa.
This GAFR200 model is the entry point of the series, sized for 1/4in ports and weighing just 290 g. The lower-pressure (L) type tops out at 0.4 MPa, so confirm your application never needs more than that. The automatic drain (A) suits unattended operation or wet lines, while the included mounting bracket provides secure installation. This unit ships without a gauge (N), but the 1/8in gauge connection is ready for one if you add it later. The 40 um element handles general workshop air, and the PC bowl is the standard choice. If your line needs lubrication downstream, order the matching GAFC200-08 combination instead. With a 1.0 MPa max supply, you have about 0.6 MPa of headroom above the 0.4 MPa top of the regulated range.
Quick checklist
This is a filter and regulator only — it delivers filtered, pressure-set air with no added oil. If a downstream tool needs lubrication, add a separate lubricator or order the GAFC200-08 combination; do not expect an oil mist from this unit.
The GAFR20008ALNT is a filter & regulator with a 1/4in port, a pressure range of 0.15-0.4 MPa (20-58 psi), and a maximum supply pressure of 1.0 MPa (145 psi). Its proof pressure is 1.5 MPa (215 psi), and the operating temperature range is -5 to 70 C. The unit has a 25 cc drain bowl and weighs 290 g.
The GAFR20008ALNT is ordered without a gauge (N code). The gauge connection port on the GAFR200 body is 1/8in, so you can fit a compatible AirTAC gauge there if you need to read the outlet pressure. Without a gauge, the set pressure cannot be visually verified.
T selects NPT port threads, the North American taper pipe standard. Without it the same order code has PT (Rc) ports, and with G it has G (BSPP) ports; body, function and dimensions do not change.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Most standard models are dispatched in 3-5 days.
Most inquiries answered within 7 hours.
Send us the quantity, thread type (PT / G / NPT) and destination. We confirm price, availability and lead time — usually within 7 hours.