
The AirTAC GAFR Adjustable Filter Regulator GAFR20008ALNTK is a genuine two-in-one filter & regulator — a diversion-type water/particulate filter and a balanced pressure regulator built into ONE body. It has 1/4" ports, a 40 µm filter element and regulates 0.15 - 0.4 MPa (20 - 58 psi). It has no lubricator, so it adds no oil to the airflow.
The GAFR20008ALNTK is a filter & regulator from AirTAC, combining a diversion filter and a balanced pressure regulator in a single body. This compact unit handles a 1/4in port and weighs just 290 g, making it a space-saving choice for small pneumatic circuits.
This model operates in the lower pressure range of 0.15-0.4 MPa (20-58 psi) and comes with a 40 um filter element. The automatic drain clears condensate from the 25 cc bowl without manual attention, and the reverse-flow valve is fitted as an ordering difference. The pressed-in, self-locking knob resists drift from vibration. This version has NPT ports (the T in the order code) for North American pipe fittings.
| Model | Airtac GAFR Adjustable Filter Regulator GAFR20008ALNTK |
|---|---|
| Series | GAFR200 filter & regulator |
| Port size | 1/4" (NPT thread) |
| Filtering grade | 40 µm |
| Pressure range | 0.15 - 0.4 MPa (20 - 58 psi) |
| Type | Lower pressure |
| Bowl material | PC |
| Drain type | Automatic drain |
| Fluid | Air |
|---|---|
| Max. pressure | 1.0 MPa (145 psi) |
| Proof pressure | 1.5 MPa (215 psi) |
| Temperature range | -5 to +70 °C (unfreeze) |
| Capacity of drain bowl | 25 cc |
| Bracket | Included |
| Weight | 290 g |
Specifications follow the official AirTAC GAFR catalogue (pages 235-236). Air must not freeze in the unit. No gauge is supplied with this model — the gauge connection on a GAFR200 is 1/8" if you add one. This unit filters and regulates only; it does not add lubrication.
| GAFR200 | GA200 series filter & regulator — sets the port range, drain-bowl capacity and weight. |
|---|---|
| (blank) | Bowl material: PC. Available on this body: PC (blank), Metal (C), Nylon (N). |
| 08 | Port size 1/4". This body offers 06 = 1/8", 08 = 1/4". |
| A | Drain: Automatic drain. |
| L | Lower pressure type — 0.15 - 0.4 MPa (20 - 58 psi). This body offers Standard (S) or Lower pressure (L). |
| (blank) | Mounting bracket included. |
| N | No pressure gauge; 1/8" gauge connection. |
| (blank) | Filtering grade 40 µm. |
| T | NPT thread; gauge scale psi / bar. |
| K | Reverse-flow (reflux) valve attached. |
The filter and the regulator are ONE body here — there is no separate GAF filter or GAR regulator part to assemble. Need lubrication downstream too? Add a lubricator by ordering the matching GAFC200-08 F.R.L. combination instead.
Figures are the end of the flow curve plotted in the AirTAC catalogue at 0.7 MPa inlet pressure — a sizing envelope for comparing bodies, not a rated flow. Read the catalogue curve for a real duty point. Outlet pressure falls as flow rises, so size a body with headroom above your peak demand.
| This model | GAFR200 · 1/4" · curve to 2000 L/min |
|---|---|
| One size up | GAFR300 (curve to 3500 L/min) |
| Add a lubricator | GAFC200-08 (F.R.L. combination) |
Feed a single pneumatic clamp or fixture on an assembly bench. The 1/4in port and 290 g body mount directly to the machine frame without extra support.
Use on a test bench for a prototype actuator or valve. The lower pressure range gives fine control for delicate experiments, and the automatic drain reduces maintenance during long tests.
Supply a small air tool or a single cylinder in a compact workshop setup. The included bracket and light weight make installation simple on a panel or rail.
Choose this GAFR200 for small jigs or single actuators where a 1/4in port and light 290 g weight fit tight spaces. The lower pressure type tops out at 0.4 MPa, so confirm your system never needs more. The automatic drain suits wet or unattended lines, while the included bracket simplifies mounting. The 40 um element handles general shop air, and the NPT thread matches common local fittings. No gauge is supplied, but the 1/8in gauge connection allows adding one later. If oil is needed downstream, order the matching GAFC200-08 combination instead. With a 1.0 MPa max supply, you have about 0.6 MPa of headroom above the 0.4 MPa regulated top.
Quick checklist
This is a filter and regulator only — it delivers filtered, pressure-set air with no added oil. If a downstream tool needs lubrication, add a separate lubricator or order the GAFC200-08 combination; do not expect an oil mist from this unit.
This filter & regulator has a 1/4in port, a lower pressure range of 0.15-0.4 MPa (20-58 psi), and a maximum supply pressure of 1.0 MPa (145 psi). Proof pressure is 1.5 MPa (215 psi), and the operating temperature range is -5 to 70 C. The drain bowl holds 25 cc, and the unit weighs 290 g.
The K indicates a reverse-flow (reflux) valve is fitted to this unit. It is an ordering difference shown as a separate pneumatic symbol in the catalogue. The function is detailed on another page, so confirm from the datasheet if you need specifics.
T selects NPT port threads, the North American taper pipe standard. Without it the same order code has PT (Rc) ports, and with G it has G (BSPP) ports; body, function and dimensions do not change.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Most standard models are dispatched in 3-5 days.
Most inquiries answered within 7 hours.
Send us the quantity, thread type (PT / G / NPT) and destination. We confirm price, availability and lead time — usually within 7 hours.