verified AirTAC China Authorized Export Seller shield 100% Genuine AirTAC Parts workspace_premium 1-Year Warranty
appsShop by Modelexpand_more
person shopping_cart Request a QuoteQuote
AirTAC GAFR200 · Filter & Regulator (Filter + Pressure Regulator, One Body)

Airtac GAFR Adjustable Filter Regulator GAFR20008ALNWTK

The AirTAC GAFR Adjustable Filter Regulator GAFR20008ALNWTK is a genuine two-in-one filter & regulator — a diversion-type water/particulate filter and a balanced pressure regulator built into ONE body. It has 1/4" ports, a 5 µm filter element and regulates 0.15 - 0.4 MPa (20 - 58 psi). It has no lubricator, so it adds no oil to the airflow.

  • TypeFilter & regulator
  • Port size1/4"
  • Pressure range0.15 - 0.4 MPa (20 - 58 psi)
  • Filtering grade5 µm
  • Bowl materialPC
  • Drainautomatic
  • Pressure gaugeNot fitted
  • Weight290 g
$50.41 $57.91Save 12% Standard model — usually dispatched in 3-5 days
Request a Quote
  • No minimum order. A single piece can be ordered.
  • Shipped from our own warehouse: most standard models dispatch in 3–5 days; custom and non-standard models take 8–10 business days. Transit time after that depends on the destination.
Compare every GAFR200-08 bowl, gauge and thread option on one page All GAFR200-08 codes →
verified Genuine AirTAC workspace_premium 1-year warranty bolt Reply in 7 h

About the Airtac GAFR Adjustable Filter Regulator GAFR20008ALNWTK

The GAFR20008ALNWTK is a compact filter & regulator from AirTAC, combining air filtration and pressure regulation in a single body. With a 1/4in port and a 290 g mass, it suits small jigs, single actuators, or bench fixtures where space is tight. It uses a 5 um element to trap fine particles and a diversion structure that spins the air to separate liquid water and solid grain into the 25 cc condensate bowl.

This lower-pressure version regulates from 0.15 to 0.4 MPa (20-58 psi), with a maximum supply of 1.0 MPa (145 psi) and proof pressure of 1.5 MPa (215 psi). The automatic drain clears condensate without manual attention. No gauge is fitted, but the 1/8in gauge connection allows one to be added later. A reverse-flow (reflux) valve is attached as an ordering difference. This version has NPT ports (the T in the order code) for North American pipe fittings.

Airtac GAFR Adjustable Filter Regulator GAFR20008ALNWTK Technical Specifications

ModelAirtac GAFR Adjustable Filter Regulator GAFR20008ALNWTK
SeriesGAFR200 filter & regulator
Port size1/4" (NPT thread)
Filtering grade5 µm
Pressure range0.15 - 0.4 MPa (20 - 58 psi)
TypeLower pressure
Bowl materialPC
Drain typeAutomatic drain
FluidAir
Max. pressure1.0 MPa (145 psi)
Proof pressure1.5 MPa (215 psi)
Temperature range-5 to +70 °C (unfreeze)
Capacity of drain bowl25 cc
BracketIncluded
Weight290 g

Specifications follow the official AirTAC GAFR catalogue (pages 235-236). Air must not freeze in the unit. No gauge is supplied with this model — the gauge connection on a GAFR200 is 1/8" if you add one. This unit filters and regulates only; it does not add lubrication.

Model Code: Airtac GAFR Adjustable Filter Regulator GAFR20008ALNWTK

GAFR200GA200 series filter & regulator — sets the port range, drain-bowl capacity and weight.
(blank)Bowl material: PC. Available on this body: PC (blank), Metal (C), Nylon (N).
08Port size 1/4". This body offers 06 = 1/8", 08 = 1/4".
ADrain: Automatic drain.
LLower pressure type — 0.15 - 0.4 MPa (20 - 58 psi). This body offers Standard (S) or Lower pressure (L).
(blank)Mounting bracket included.
NNo pressure gauge; 1/8" gauge connection.
WFiltering grade 5 µm.
TNPT thread; gauge scale psi / bar.
KReverse-flow (reflux) valve attached.

The filter and the regulator are ONE body here — there is no separate GAF filter or GAR regulator part to assemble. Need lubrication downstream too? Add a lubricator by ordering the matching GAFC200-08 F.R.L. combination instead.

Size Class & Flow Envelope

  • GAFR2001/8"-1/4" · 2000 L/min
  • GAFR3001/4"-1/2" · 3500 L/min
  • GAFR4003/8"-1/2" · 7000 L/min
  • GAFR5003/4" · 8000 L/min
  • GAFR6003/4"-1" · 12000 L/min

Figures are the end of the flow curve plotted in the AirTAC catalogue at 0.7 MPa inlet pressure — a sizing envelope for comparing bodies, not a rated flow. Read the catalogue curve for a real duty point. Outlet pressure falls as flow rises, so size a body with headroom above your peak demand.

This modelGAFR200 · 1/4" · curve to 2000 L/min
One size upGAFR300 (curve to 3500 L/min)
Add a lubricatorGAFC200-08 (F.R.L. combination)

Where the Airtac GAFR Adjustable Filter Regulator GAFR20008ALNWTK Is Used

precision_manufacturing

Small jig or fixture

Feed a single pneumatic clamp or a small bench fixture with clean, regulated air. The 1/4in port and 290 g mass fit neatly into compact machine frames.

handyman

Bench test setup

Provide a stable 0.15-0.4 MPa supply to a prototype valve or a test rig. The 5 um element protects sensitive components from fine abrasive particles.

science

Instrument air line

Supply a lab instrument or a precision pressure sensor with filtered air. The automatic drain keeps the 25 cc bowl from overflowing during long unattended runs.

Is the Airtac GAFR Adjustable Filter Regulator GAFR20008ALNWTK the Right Air-Prep Unit?

Choose the body and port first: GAFR200 offers 1/8in and 1/4in ports, with a flow curve plotted to 2000 L/min at 0.7 MPa inlet. The PC bowl (blank code) is the standard build, while the 5 um element (W) traps finer particles than the 40 um standard, at the cost of more frequent service. The automatic drain (A) suits unattended or wet lines, whereas the blank drain would ship both semi-auto and manual options. The L type tops out at 0.4 MPa, so if the machine may ever need more, the standard S type is the correct choice. The mounting bracket is included, the thread is NPT with a MPa/psi gauge scale, and the reflux valve (K) is fitted. If oil is needed downstream, order the matching GAFC200-08 combination instead. The 1.0 MPa max supply leaves about 0.6 MPa above the 0.4 MPa top of the range.

Quick checklist

  • ✓ Body size for your peak flow (1/4" here)
  • ✓ Standard 0.9 MPa or lower-pressure 0.4 MPa
  • ✓ Bowl material: PC (blank), Metal (C), Nylon (N)
  • ✓ Drain: semi-auto + manual, or automatic
  • ✓ Element 40 µm or 5 µm
  • ✓ Bracket kept or removed (J); add a lubricator = GAFC
Ask an Engineer

Installation & Maintenance Notes

  • check Install with the airflow arrow: IN to OUT, gauge/knob accessible.
  • check Keep inlet pressure at or below 1.0 MPa (145 psi).
  • check Set pressure with the pressed-in self-locking knob; pull to adjust, press to lock.
  • check Drain condensate before the 25 cc bowl fills.
  • check Keep the unit above freezing (-5 to +70 °C, unfreeze).
  • check Support the 290 g unit on its bracket, not on the tubing.

This is a filter and regulator only — it delivers filtered, pressure-set air with no added oil. If a downstream tool needs lubrication, add a separate lubricator or order the GAFC200-08 combination; do not expect an oil mist from this unit.

Airtac GAFR Adjustable Filter Regulator GAFR20008ALNWTK FAQ

This is a filter & regulator with a 1/4in port, a 25 cc drain bowl, and a 290 g weight. The lower-pressure type regulates from 0.15 to 0.4 MPa (20-58 psi), with a maximum supply pressure of 1.0 MPa (145 psi) and a proof pressure of 1.5 MPa (215 psi). The temperature range is -5 to 70 C and the unit must not freeze. The 5 um element filters solid particles, and the automatic drain clears condensate.

The K code means a reverse-flow (reflux) valve is fitted; it is an ordering difference only, and its function is detailed in the catalogue. The N after the port code means no gauge is supplied, though the 1/8in gauge connection allows one to be added. The set pressure cannot be read without adding a gauge.

T selects NPT port threads, the North American taper pipe standard. Without it the same order code has PT (Rc) ports, and with G it has G (BSPP) ports; body, function and dimensions do not change.

verified

Authorized Export Seller

Genuine AirTAC parts produced by AirTAC factory.

workspace_premium

1-Year Warranty

Covers non-human-caused product damage.

local_shipping

Fast Dispatch

Most standard models are dispatched in 3-5 days.

bolt

Fast Reply

Most inquiries answered within 7 hours.

Request a Quote for Airtac GAFR Adjustable Filter Regulator GAFR20008ALNWTK

Send us the quantity, thread type (PT / G / NPT) and destination. We confirm price, availability and lead time — usually within 7 hours.

Thank you. We received your request for GAFR20008ALNWTK and will confirm price, availability and lead time — usually within 7 hours.

For the fastest response, keep the complete model number above and include a clear photo of the product label. If photo upload is unavailable, email photos to [email protected] with your model number.