
The AirTAC GAFR Adjustable Filter Regulator GAFR20008ALTK is a genuine two-in-one filter & regulator — a diversion-type water/particulate filter and a balanced pressure regulator built into ONE body. It has 1/4" ports, a 40 µm filter element and regulates 0.15 - 0.4 MPa (20 - 58 psi). It has no lubricator, so it adds no oil to the airflow.
The GAFR20008ALTK is a filter and regulator combined in a single body, so it cleans incoming air and locks a steady outlet pressure without needing a separate filter plus regulator pair. Its lower-pressure tuning spans 0.15-0.4 MPa (20-58 psi), and the 40 um element traps solid particles while the diversion structure spins out liquid water into the 25 cc drain bowl.
This compact unit weighs just 290 g and carries a 1/4in port, making it a natural fit for a small jig or a single actuator station. The pressed-in self-locking knob resists set-pressure drift from vibration, and the automatic drain clears condensate without manual attention. This version has NPT ports (the T in the order code) for North American pipe fittings.
| Model | Airtac GAFR Adjustable Filter Regulator GAFR20008ALTK |
|---|---|
| Series | GAFR200 filter & regulator |
| Port size | 1/4" (NPT thread) |
| Filtering grade | 40 µm |
| Pressure range | 0.15 - 0.4 MPa (20 - 58 psi) |
| Type | Lower pressure |
| Bowl material | PC |
| Drain type | Automatic drain |
| Fluid | Air |
|---|---|
| Max. pressure | 1.0 MPa (145 psi) |
| Proof pressure | 1.5 MPa (215 psi) |
| Temperature range | -5 to +70 °C (unfreeze) |
| Capacity of drain bowl | 25 cc |
| Bracket | Included |
| Weight | 290 g |
Specifications follow the official AirTAC GAFR catalogue (pages 235-236). Air must not freeze in the unit. The fitted circular gauge reads in psi / bar, set by the NPT thread code. This unit filters and regulates only; it does not add lubrication.
| GAFR200 | GA200 series filter & regulator — sets the port range, drain-bowl capacity and weight. |
|---|---|
| (blank) | Bowl material: PC. Available on this body: PC (blank), Metal (C), Nylon (N). |
| 08 | Port size 1/4". This body offers 06 = 1/8", 08 = 1/4". |
| A | Drain: Automatic drain. |
| L | Lower pressure type — 0.15 - 0.4 MPa (20 - 58 psi). This body offers Standard (S) or Lower pressure (L). |
| (blank) | Mounting bracket included. |
| (blank) | Circular pressure gauge fitted. |
| (blank) | Filtering grade 40 µm. |
| T | NPT thread; gauge scale psi / bar. |
| K | Reverse-flow (reflux) valve attached. |
The filter and the regulator are ONE body here — there is no separate GAF filter or GAR regulator part to assemble. Need lubrication downstream too? Add a lubricator by ordering the matching GAFC200-08 F.R.L. combination instead.
Figures are the end of the flow curve plotted in the AirTAC catalogue at 0.7 MPa inlet pressure — a sizing envelope for comparing bodies, not a rated flow. Read the catalogue curve for a real duty point. Outlet pressure falls as flow rises, so size a body with headroom above your peak demand.
| This model | GAFR200 · 1/4" · curve to 2000 L/min |
|---|---|
| One size up | GAFR300 (curve to 3500 L/min) |
| Add a lubricator | GAFC200-08 (F.R.L. combination) |
Feed a single pneumatic clamp on a benchtop assembly fixture. The lower-pressure range protects delicate workpieces, and the automatic drain keeps the small 25 cc bowl from overflowing during a long production run.
Supply a manual test station that cycles a small cylinder at controlled pressure. The self-locking knob holds the setpoint despite bench vibration, and the compact 290 g body mounts directly to the rig frame.
Provide clean, regulated air to a single lab instrument that needs a gentle 0.15-0.4 MPa feed. The 40 um filter removes particulates, while the automatic drain ensures the bowl never floods during overnight tests.
Choose the GAFR200 body when your line is 1/4in and your flow demand stays within the plotted 2000 L/min envelope at 0.7 MPa inlet; step up to the GAFR300 body (60 cc bowl, 3500 L/min envelope) if you need more capacity. The PC bowl suits general dry indoor use, the automatic drain handles wet or unattended lines, and the included bracket simplifies panel mounting. The 40 um element is the standard choice; the fitted gauge reads MPa/psi on the NPT thread. The reverse-flow (reflux) valve is an ordering difference only. If your line needs oil downstream, order the matching GAFC200-08 combination instead. With the lower-pressure type, the 1.0 MPa max supply leaves about 0.6 MPa above the 0.4 MPa top of the range.
Quick checklist
This is a filter and regulator only — it delivers filtered, pressure-set air with no added oil. If a downstream tool needs lubrication, add a separate lubricator or order the GAFC200-08 combination; do not expect an oil mist from this unit.
The GAFR20008ALTK is a lower-pressure filter & regulator with a 1/4in port. Its working range is 0.15-0.4 MPa (20-58 psi), with a 1.0 MPa (145 psi) maximum and 1.5 MPa (215 psi) proof pressure. It operates from -5 to 70 C and must not freeze. The drain bowl holds 25 cc, and the unit weighs 290 g. It has a 40 um element, an automatic drain, and a fitted gauge.
The K code indicates the reverse-flow (reflux) valve is fitted. This is an ordering difference from a standard GAFR20008AL. The catalogue defers the detailed function of this valve to a separate page, so we recommend confirming its operation in the official AirTAC documentation for your application.
T selects NPT port threads, the North American taper pipe standard. Without it the same order code has PT (Rc) ports, and with G it has G (BSPP) ports; body, function and dimensions do not change.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Most standard models are dispatched in 3-5 days.
Most inquiries answered within 7 hours.
Send us the quantity, thread type (PT / G / NPT) and destination. We confirm price, availability and lead time — usually within 7 hours.