
The AirTAC GAFR Adjustable Filter Regulator GAFR20008ALWTK is a genuine two-in-one filter & regulator — a diversion-type water/particulate filter and a balanced pressure regulator built into ONE body. It has 1/4" ports, a 5 µm filter element and regulates 0.15 - 0.4 MPa (20 - 58 psi). It has no lubricator, so it adds no oil to the airflow.
The GAFR20008ALWTK is a filter and regulator combined in a single body, handling both air cleaning and pressure control without a separate lubricator. It uses a 1/4in port, a 5 um element, and a lower-pressure range of 0.15-0.4 MPa (20-58 psi), with the circular gauge showing MPa/psi.
Its diversion structure spins incoming air to separate liquid water and solid particles into the 25 cc drain bowl, while the balanced, self-locking regulator keeps the outlet steady. The automatic drain clears condensate without manual attention, and the included mounting bracket suits panel or frame installation for this 290 g unit. This version has NPT ports (the T in the order code) for North American pipe fittings.
| Model | Airtac GAFR Adjustable Filter Regulator GAFR20008ALWTK |
|---|---|
| Series | GAFR200 filter & regulator |
| Port size | 1/4" (NPT thread) |
| Filtering grade | 5 µm |
| Pressure range | 0.15 - 0.4 MPa (20 - 58 psi) |
| Type | Lower pressure |
| Bowl material | PC |
| Drain type | Automatic drain |
| Fluid | Air |
|---|---|
| Max. pressure | 1.0 MPa (145 psi) |
| Proof pressure | 1.5 MPa (215 psi) |
| Temperature range | -5 to +70 °C (unfreeze) |
| Capacity of drain bowl | 25 cc |
| Bracket | Included |
| Weight | 290 g |
Specifications follow the official AirTAC GAFR catalogue (pages 235-236). Air must not freeze in the unit. The fitted circular gauge reads in psi / bar, set by the NPT thread code. This unit filters and regulates only; it does not add lubrication.
| GAFR200 | GA200 series filter & regulator — sets the port range, drain-bowl capacity and weight. |
|---|---|
| (blank) | Bowl material: PC. Available on this body: PC (blank), Metal (C), Nylon (N). |
| 08 | Port size 1/4". This body offers 06 = 1/8", 08 = 1/4". |
| A | Drain: Automatic drain. |
| L | Lower pressure type — 0.15 - 0.4 MPa (20 - 58 psi). This body offers Standard (S) or Lower pressure (L). |
| (blank) | Mounting bracket included. |
| (blank) | Circular pressure gauge fitted. |
| W | Filtering grade 5 µm. |
| T | NPT thread; gauge scale psi / bar. |
| K | Reverse-flow (reflux) valve attached. |
The filter and the regulator are ONE body here — there is no separate GAF filter or GAR regulator part to assemble. Need lubrication downstream too? Add a lubricator by ordering the matching GAFC200-08 F.R.L. combination instead.
Figures are the end of the flow curve plotted in the AirTAC catalogue at 0.7 MPa inlet pressure — a sizing envelope for comparing bodies, not a rated flow. Read the catalogue curve for a real duty point. Outlet pressure falls as flow rises, so size a body with headroom above your peak demand.
| This model | GAFR200 · 1/4" · curve to 2000 L/min |
|---|---|
| One size up | GAFR300 (curve to 3500 L/min) |
| Add a lubricator | GAFC200-08 (F.R.L. combination) |
Feed a single pneumatic valve or small actuator on a benchtop fixture, where the 5 um element protects fine internals and the lower pressure range prevents over-pressuring delicate components.
Mount this 290 g unit on a small assembly jig or test stand, using the included bracket for a stable installation and the automatic drain to handle condensate without daily checks.
Supply a sensitive instrument or gauge with filtered air at a steady low pressure, relying on the balanced regulator to hold the setpoint as shop supply varies.
Choose the GAFR200 body for small jigs or single actuators needing a 1/4in port, with a 2000 L/min flow envelope plotted at 0.7 MPa inlet. The PC bowl suits standard shop air; the 5 um element traps finer particles than the standard 40 um for precision valves, though it needs more frequent service. The automatic drain is ideal for wet or unattended lines, while the lower-pressure type tops out at 0.4 MPa, so confirm the machine never needs more. The bracket is included, the gauge is fitted with a MPa/psi scale, and the reverse-flow valve is attached as an ordering difference. If oil is needed downstream, order the matching GAFC200-08 combination instead. Note that 1.0 MPa max supply leaves about 0.6 MPa above the 0.4 MPa top of the range.
Quick checklist
This is a filter and regulator only — it delivers filtered, pressure-set air with no added oil. If a downstream tool needs lubrication, add a separate lubricator or order the GAFC200-08 combination; do not expect an oil mist from this unit.
The GAFR20008ALWTK has a pressure range of 0.15-0.4 MPa (20-58 psi), a max pressure of 1.0 MPa (145 psi), and a proof pressure of 1.5 MPa (215 psi). It operates from -5 to 70 C, has a 25 cc drain bowl, and weighs 290 g with a 1/4in port.
The K indicates a reverse-flow (reflux) valve is fitted to the GAFR20008ALWTK. It is an ordering difference from models without this valve; the catalogue details its function separately, so refer to the datasheet for operational specifics.
T selects NPT port threads, the North American taper pipe standard. Without it the same order code has PT (Rc) ports, and with G it has G (BSPP) ports; body, function and dimensions do not change.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Most standard models are dispatched in 3-5 days.
Most inquiries answered within 7 hours.
Send us the quantity, thread type (PT / G / NPT) and destination. We confirm price, availability and lead time — usually within 7 hours.