
The AirTAC GAFR Adjustable Filter Regulator GAFR20008ASJNT is a genuine two-in-one filter & regulator — a diversion-type water/particulate filter and a balanced pressure regulator built into ONE body. It has 1/4" ports, a 40 µm filter element and regulates 0.15 - 0.9 MPa (20 - 130 psi). It has no lubricator, so it adds no oil to the airflow.
The GAFR20008ASJNT is a genuine AirTAC filter & regulator, combining both functions in one body to save rail space and reduce potential leak points. This compact unit handles 1/4in ports, regulates from 0.15-0.9 MPa (20-130 psi), and filters to 40 um.
Its diversion structure spins incoming air to separate liquid water and solid particles into the 25 cc drain bowl. The balanced, self-locking regulator mechanism holds the outlet steady as supply pressure varies, resisting drift from vibration. No gauge is fitted, but the 1/8in gauge connection is ready for one. This version has NPT ports (the T in the order code) for North American pipe fittings.
| Model | Airtac GAFR Adjustable Filter Regulator GAFR20008ASJNT |
|---|---|
| Series | GAFR200 filter & regulator |
| Port size | 1/4" (NPT thread) |
| Filtering grade | 40 µm |
| Pressure range | 0.15 - 0.9 MPa (20 - 130 psi) |
| Type | Standard |
| Bowl material | PC |
| Drain type | Automatic drain |
| Fluid | Air |
|---|---|
| Max. pressure | 1.0 MPa (145 psi) |
| Proof pressure | 1.5 MPa (215 psi) |
| Temperature range | -5 to +70 °C (unfreeze) |
| Capacity of drain bowl | 25 cc |
| Bracket | Not included (J) |
| Weight | 290 g |
Specifications follow the official AirTAC GAFR catalogue (pages 235-236). Air must not freeze in the unit. No gauge is supplied with this model — the gauge connection on a GAFR200 is 1/8" if you add one. This unit filters and regulates only; it does not add lubrication.
| GAFR200 | GA200 series filter & regulator — sets the port range, drain-bowl capacity and weight. |
|---|---|
| (blank) | Bowl material: PC. Available on this body: PC (blank), Metal (C), Nylon (N). |
| 08 | Port size 1/4". This body offers 06 = 1/8", 08 = 1/4". |
| A | Drain: Automatic drain. |
| S | Standard type — 0.15 - 0.9 MPa (20 - 130 psi). This body offers Standard (S) or Lower pressure (L). |
| J | No bracket (J) — supplied without the mounting bracket. |
| N | No pressure gauge; 1/8" gauge connection. |
| (blank) | Filtering grade 40 µm. |
| T | NPT thread; gauge scale psi / bar. |
| (blank) | No reverse-flow valve. |
The filter and the regulator are ONE body here — there is no separate GAF filter or GAR regulator part to assemble. Need lubrication downstream too? Add a lubricator by ordering the matching GAFC200-08 F.R.L. combination instead.
Figures are the end of the flow curve plotted in the AirTAC catalogue at 0.7 MPa inlet pressure — a sizing envelope for comparing bodies, not a rated flow. Read the catalogue curve for a real duty point. Outlet pressure falls as flow rises, so size a body with headroom above your peak demand.
| This model | GAFR200 · 1/4" · curve to 2000 L/min |
|---|---|
| One size up | GAFR300 (curve to 3500 L/min) |
| Add a lubricator | GAFC200-08 (F.R.L. combination) |
Feed a single pneumatic clamp or precision jig on an assembly bench. The compact 290 g body mounts directly to the fixture frame, and the automatic drain keeps the line clear during long production runs.
Supply clean, regulated air to a prototype test rig with a single actuator. The 1/4in port matches small bore cylinders, while the 40 um element protects sensitive test valves from particulate contamination.
Provide filtered, pressure-controlled air at a maintenance bench for blow-off guns or small pneumatic tools. The 25 cc bowl is easy to monitor, and the compact size fits neatly into a crowded workstation layout.
Choose the GAFR200 for small jigs or single actuators where space is tight and 1/4in ports suffice. The automatic drain handles condensate without manual intervention, ideal for wet or unattended lines. This model omits the mounting bracket (J) and gauge (N), so plan for panel mounting and add a gauge if you need to read set pressure. The 40 um element suits general shop air; upgrade to the 5 um element for finer filtration. This order code has NPT ports (the T in the code); the PT and G versions are separate order codes. If you need lubrication downstream, order the matching GAFC200-08 combination instead. 1.0 MPa max supply leaves about 0.1 MPa above the 0.9 MPa top of the range.
Quick checklist
This is a filter and regulator only — it delivers filtered, pressure-set air with no added oil. If a downstream tool needs lubrication, add a separate lubricator or order the GAFC200-08 combination; do not expect an oil mist from this unit.
The GAFR20008ASJNT is a filter & regulator with 1/4in ports. Pressure range is 0.15-0.9 MPa (20-130 psi), max pressure is 1.0 MPa (145 psi), and proof pressure is 1.5 MPa (215 psi). Temperature range is -5 to 70 C. The drain bowl holds 25 cc, and the unit weighs 290 g.
The 'N' code means no gauge is supplied, leaving the 1/8in gauge connection open for a panel-mounted gauge if needed. The 'J' code means the mounting bracket is omitted, which suits installations using existing brackets or direct panel mounting. Both options reduce cost and parts when not required.
T selects NPT port threads, the North American taper pipe standard. Without it the same order code has PT (Rc) ports, and with G it has G (BSPP) ports; body, function and dimensions do not change.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Most standard models are dispatched in 3-5 days.
Most inquiries answered within 7 hours.
Send us the quantity, thread type (PT / G / NPT) and destination. We confirm price, availability and lead time — usually within 7 hours.